Re: [PATCH v7 11/14] dt-bindings: Document the Rockchip MIPI RX D-PHY bindings

["André Almeida" <andrealmeid@collabora.com>]

Hello Helen,

On 7/3/19 4:09 PM, Helen Koike wrote:
> From: Jacob Chen <jacob2.chen@rock-chips.com>
>
> Add DT bindings documentation for Rockchip MIPI D-PHY RX
>
> Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> [update for upstream]
> Signed-off-by: Helen Koike <helen.koike@collabora.com>
>
> ---
>
> Changes in v7:
> - updated doc with new design and tested example
>
>  .../bindings/media/rockchip-mipi-dphy.txt     | 38 +++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt
>
> diff --git a/Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt b/Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt
> new file mode 100644
> index 000000000000..2305d44d92db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt
> @@ -0,0 +1,38 @@
> +Rockchip SoC MIPI RX D-PHY
> +-------------------------------------------------------------
Here I would also remove those extra `---`.

Thanks,
    André
> +
> +Required properties:
> +- compatible: value should be one of the following
> +	"rockchip,rk3288-mipi-dphy"
> +	"rockchip,rk3399-mipi-dphy"
> +- clocks : list of clock specifiers, corresponding to entries in
> +	clock-names property;
> +- clock-names: required clock name.
> +- #phy-cells: Number of cells in a PHY specifier; Should be 0.
> +
> +MIPI RX D-PHY use registers in "general register files", it
> +should be a child of the GRF.
> +
> +Optional properties:
> +- reg: offset and length of the register set for the device.
> +- rockchip,grf: MIPI TX1RX1 D-PHY not only has its own register but also
> +		the GRF, so it is only necessary for MIPI TX1RX1 D-PHY.
> +
> +Device node example
> +-------------------
> +
> +grf: syscon@ff770000 {
> +	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
> +
> +...
> +
> +	dphy: mipi-dphy {
> +		compatible = "rockchip,rk3399-mipi-dphy";
> +		clocks = <&cru SCLK_MIPIDPHY_REF>,
> +			<&cru SCLK_DPHY_RX0_CFG>,
> +			<&cru PCLK_VIO_GRF>;
> +		clock-names = "dphy-ref", "dphy-cfg", "grf";
> +		power-domains = <&power RK3399_PD_VIO>;
> +		#phy-cells = <0>;
> +	};
> +};