From: Alexander Dahl <post@lespocky.de>
To: Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Alexander Dahl <ada@thorsis.com>,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
Alexander Dahl <post@lespocky.de>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-omap@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-amlogic@lists.infradead.org, linux-mips@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
Rob Herring <robh@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Russell King <linux@armlinux.org.uk>
Subject: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml
Date: Mon, 5 Oct 2020 22:34:41 +0200 [thread overview]
Message-ID: <20201005203451.9985-3-post@lespocky.de> (raw)
In-Reply-To: <20201005203451.9985-1-post@lespocky.de>
The example was adapted in the following ways:
- make use of the now supported 'function' and 'color' properties
- remove pwm nodes, those are documented elsewhere
- align node names to new dt schema rules and dt recommendations
License was not explicitly set before. The license set now is
recommended by DT project.
Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
---
Notes:
NOTE: Due to license set/change this needs Acked-by or Signed-off-by from:
* Peter Ujfalusi
* Russell King
That was discussed already with Peter (original author), still waiting
for Acked-by though …
Changelog
---------
v6 -> v7:
* added Reviewed-by (Krzysztof Kozlowski)
* reworded commit message (suggested by Krzysztof)
* added Reviewed-by (Rob Herring)
v5 -> v6:
* removed pwm nodes from example (Rob)
* renamed led-controller node in example (Rob)
v4 -> v5:
* updated based on feedback by Rob Herring
* removed Acked-by
v3 -> v4:
* added Cc to original author of the binding
v2 -> v3:
* changed license identifier to recommended one
* added Acked-by
v2:
* added this patch to series (Suggested-by: Jacek Anaszewski)
.../devicetree/bindings/leds/leds-pwm.txt | 50 -------------
.../devicetree/bindings/leds/leds-pwm.yaml | 70 +++++++++++++++++++
2 files changed, 70 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
deleted file mode 100644
index 6c6583c35f2f..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-LED connected to PWM
-
-Required properties:
-- compatible : should be "pwm-leds".
-
-Each LED is represented as a sub-node of the pwm-leds device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
- specify the period time to be used: <&phandle id period_ns>;
-- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
- For the pwms and pwm-names property please refer to:
- Documentation/devicetree/bindings/pwm/pwm.txt
-- max-brightness : Maximum brightness possible for the LED
-- active-low : (optional) For PWMs where the LED is wired to supply
- rather than ground.
-- label : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-twl_pwm: pwm {
- /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
- compatible = "ti,twl6030-pwm";
- #pwm-cells = <2>;
-};
-
-twl_pwmled: pwmled {
- /* provides one PWM (id 0 for Charing indicator LED) */
- compatible = "ti,twl6030-pwmled";
- #pwm-cells = <2>;
-};
-
-pwmleds {
- compatible = "pwm-leds";
- kpad {
- label = "omap4::keypad";
- pwms = <&twl_pwm 0 7812500>;
- max-brightness = <127>;
- };
-
- charging {
- label = "omap4:green:chrg";
- pwms = <&twl_pwmled 0 7812500>;
- max-brightness = <255>;
- };
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 000000000000..fe4d5fd25913
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+ - Pavel Machek <pavel@ucw.cz>
+
+description:
+ Each LED is represented as a sub-node of the pwm-leds device. Each
+ node's name represents the name of the corresponding LED.
+
+properties:
+ compatible:
+ const: pwm-leds
+
+patternProperties:
+ "^led(-[0-9a-f]+)?$":
+ type: object
+
+ $ref: common.yaml#
+
+ properties:
+ pwms:
+ maxItems: 1
+
+ pwm-names: true
+
+ max-brightness:
+ description:
+ Maximum brightness possible for the LED
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ active-low:
+ description:
+ For PWMs where the LED is wired to supply rather than ground.
+ type: boolean
+
+ required:
+ - pwms
+ - max-brightness
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/leds/common.h>
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-1 {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_CHARGING;
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+ };
+
+...
--
2.20.1
next prev parent reply other threads:[~2020-10-05 20:36 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-05 20:34 [PATCH v7 00/12] leds: pwm: Make automatic labels work Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 01/12] leds: pwm: Remove platform_data support Alexander Dahl
2020-10-07 10:03 ` Pavel Machek
2020-10-05 20:34 ` Alexander Dahl [this message]
2020-10-07 10:02 ` [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml Pavel Machek
2020-10-07 10:03 ` Krzysztof Kozlowski
2020-10-28 20:39 ` Alexander Dahl
2020-10-29 13:46 ` Russell King - ARM Linux admin
2020-11-25 11:08 ` Pavel Machek
2020-10-05 20:34 ` [PATCH v7 03/12] dt-bindings: mfd: Fix schema warnings for pwm-leds Alexander Dahl
2020-10-06 2:17 ` Jeff LaBundy
2020-10-06 6:34 ` Alexander Dahl
2020-10-06 22:27 ` Rob Herring
2020-10-06 22:28 ` Rob Herring
2020-10-07 10:03 ` Pavel Machek
2020-10-07 10:08 ` Alexander Dahl
2020-10-08 7:33 ` Lee Jones
2020-10-08 7:50 ` Pavel Machek
2020-10-05 20:34 ` [PATCH v7 04/12] ARM: dts: at91: smartkiz: Reference led node directly Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 05/12] ARM: dts: at91: Fix schema warnings for pwm-leds Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 06/12] ARM: dts: berlin: " Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 07/12] ARM: dts: exynos: " Alexander Dahl
2020-10-07 6:25 ` Krzysztof Kozlowski
2020-10-26 18:45 ` Krzysztof Kozlowski
2020-10-05 20:34 ` [PATCH v7 08/12] ARM: dts: imx: " Alexander Dahl
2020-10-30 7:46 ` Shawn Guo
2020-10-05 20:34 ` [PATCH v7 09/12] ARM: dts: omap: " Alexander Dahl
2020-11-10 13:25 ` Tony Lindgren
2020-10-05 20:34 ` [PATCH v7 10/12] ARM: dts: stm32: " Alexander Dahl
2020-10-27 7:03 ` [Linux-stm32] " Ahmad Fatoum
2020-10-27 10:05 ` Alexander Dahl
2020-10-27 10:58 ` Ahmad Fatoum
2020-10-28 7:34 ` Alexander Dahl
2020-11-02 10:47 ` Ahmad Fatoum
2020-10-05 20:34 ` [PATCH v7 11/12] arm64: dts: meson: " Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 12/12] MIPS: DTS: img: " Alexander Dahl
2020-10-28 18:56 ` [PATCH v7 00/12] leds: pwm: Make automatic labels work Alexandre Belloni
2020-10-28 19:21 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201005203451.9985-3-post@lespocky.de \
--to=post@lespocky.de \
--cc=ada@thorsis.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=krzk@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=pavel@ucw.cz \
--cc=peter.ujfalusi@ti.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).