From: Mathieu Malaterre <malat@debian.org>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Jason Cooper <jason@lakedaemon.net>,
Marc Zyngier <marc.zyngier@arm.com>,
Lee Jones <lee.jones@linaro.org>,
LKML <linux-kernel@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org, od@zcrc.me
Subject: Re: [PATCH v12 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers
Date: Wed, 22 May 2019 11:21:00 +0200 [thread overview]
Message-ID: <CA+7wUsxe4DLmAGNnnXZ3UokguMJ0cOGtu=opQpuAPvN_SH4KUw@mail.gmail.com> (raw)
In-Reply-To: <20190521145141.9813-10-paul@crapouillou.net>
On Tue, May 21, 2019 at 4:52 PM Paul Cercueil <paul@crapouillou.net> wrote:
>
> Add DTS nodes for the JZ4780, JZ4770 and JZ4740 devicetree files.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>
> Notes:
> v5: New patch
>
> v6: Fix register lengths in watchdog/pwm nodes
>
> v7: No change
>
> v8: - Fix wrong start address for PWM node
> - Add system timer and clocksource sub-nodes
>
> v9: Drop timer and clocksource sub-nodes
>
> v10-v11: No change
>
> v12: Drop PWM/watchdog/OST sub-nodes, for now.
>
> arch/mips/boot/dts/ingenic/jz4740.dtsi | 22 ++++++++++++++++++++++
> arch/mips/boot/dts/ingenic/jz4770.dtsi | 21 +++++++++++++++++++++
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 21 +++++++++++++++++++++
> 3 files changed, 64 insertions(+)
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 2beb78a62b7d..807d9702d4cf 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -53,6 +53,28 @@
> clock-names = "rtc";
> };
>
> + tcu: timer@10002000 {
> + compatible = "ingenic,jz4740-tcu";
> + reg = <0x10002000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x10002000 0x1000>;
> +
> + #clock-cells = <1>;
> +
> + clocks = <&cgu JZ4740_CLK_RTC
> + &cgu JZ4740_CLK_EXT
> + &cgu JZ4740_CLK_PCLK
> + &cgu JZ4740_CLK_TCU>;
> + clock-names = "rtc", "ext", "pclk", "tcu";
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <23 22 21>;
> + };
> +
> rtc_dev: rtc@10003000 {
> compatible = "ingenic,jz4740-rtc";
> reg = <0x10003000 0x40>;
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> index 49ede6c14ff3..70932fd90902 100644
> --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -46,6 +46,27 @@
> #clock-cells = <1>;
> };
>
> + tcu: timer@10002000 {
> + compatible = "ingenic,jz4770-tcu";
> + reg = <0x10002000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x10002000 0x1000>;
> +
> + #clock-cells = <1>;
> +
> + clocks = <&cgu JZ4770_CLK_RTC
> + &cgu JZ4770_CLK_EXT
> + &cgu JZ4770_CLK_PCLK>;
> + clock-names = "rtc", "ext", "pclk";
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <27 26 25>;
> + };
> +
> pinctrl: pin-controller@10010000 {
> compatible = "ingenic,jz4770-pinctrl";
> reg = <0x10010000 0x600>;
> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> index b03cdec56de9..495082ce7fc5 100644
> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> @@ -46,6 +46,27 @@
> #clock-cells = <1>;
> };
>
> + tcu: timer@10002000 {
With W=1, I see:
../arch/mips/boot/dts/ingenic/jz4780.dtsi:64.22-83.4: Warning
(unique_unit_address): /timer@10002000: duplicate unit-address (also
used in node /watchdog@1000
2000)
> + compatible = "ingenic,jz4770-tcu";
> + reg = <0x10002000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x10002000 0x1000>;
> +
> + #clock-cells = <1>;
> +
> + clocks = <&cgu JZ4780_CLK_RTCLK
> + &cgu JZ4780_CLK_EXCLK
> + &cgu JZ4780_CLK_PCLK>;
> + clock-names = "rtc", "ext", "pclk";
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <27 26 25>;
> + };
> +
> rtc_dev: rtc@10003000 {
> compatible = "ingenic,jz4780-rtc";
> reg = <0x10003000 0x4c>;
> --
> 2.21.0.593.g511ec345e18
>
next prev parent reply other threads:[~2019-05-22 9:21 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 14:51 Ingenic Timer/Counter Unit (TCU) patchset v12 Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 02/13] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 03/13] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2019-05-24 20:21 ` Rob Herring
2019-05-25 19:13 ` Paul Cercueil
2019-06-11 14:57 ` Rob Herring
2019-05-21 14:51 ` [PATCH v12 04/13] mfd: Add Ingenic TCU driver Paul Cercueil
2019-06-22 12:21 ` Paul Cercueil
2019-06-26 13:18 ` Lee Jones
2019-06-26 13:55 ` Paul Cercueil
2019-06-27 6:58 ` Lee Jones
2019-06-27 8:49 ` Paul Cercueil
2019-06-27 9:01 ` Lee Jones
2019-06-27 9:19 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 05/13] clk: ingenic: Add driver for the TCU clocks Paul Cercueil
2019-06-07 21:28 ` Stephen Boyd
2019-06-07 21:59 ` Paul Cercueil
2019-06-07 22:50 ` Stephen Boyd
2019-05-21 14:51 ` [PATCH v12 06/13] irqchip: Add irq-ingenic-tcu driver Paul Cercueil
2019-06-22 12:22 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 07/13] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-06-22 12:23 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 08/13] clk: jz4740: Add TCU clock Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2019-05-22 9:21 ` Mathieu Malaterre [this message]
2019-05-22 11:15 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 13/13] MIPS: jz4740: Drop obsolete code Paul Cercueil
2019-05-27 11:39 ` Ingenic Timer/Counter Unit (TCU) patchset v12 Mathieu Malaterre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+7wUsxe4DLmAGNnnXZ3UokguMJ0cOGtu=opQpuAPvN_SH4KUw@mail.gmail.com' \
--to=malat@debian.org \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=jhogan@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=od@zcrc.me \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).