From: Alex Shi <alex.shi@linux.alibaba.com>
To: akpm@linux-foundation.org, mgorman@techsingularity.net,
tj@kernel.org, hughd@google.com, khlebnikov@yandex-team.ru,
daniel.m.jordan@oracle.com, yang.shi@linux.alibaba.com,
willy@infradead.org, hannes@cmpxchg.org, lkp@intel.com,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
cgroups@vger.kernel.org, shakeelb@google.com,
iamjoonsoo.kim@lge.com, richard.weiyang@gmail.com
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Subject: [PATCH v11 05/16] mm/thp: move lru_add_page_tail func to huge_memory.c
Date: Thu, 28 May 2020 19:00:47 +0800 [thread overview]
Message-ID: <1590663658-184131-6-git-send-email-alex.shi@linux.alibaba.com> (raw)
In-Reply-To: <1590663658-184131-1-git-send-email-alex.shi@linux.alibaba.com>
The func is only used in huge_memory.c, defining it in other file with a
CONFIG_TRANSPARENT_HUGEPAGE macro restrict just looks weird.
Let's move it THP.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
---
include/linux/swap.h | 2 --
mm/huge_memory.c | 30 ++++++++++++++++++++++++++++++
mm/swap.c | 33 ---------------------------------
3 files changed, 30 insertions(+), 35 deletions(-)
diff --git a/include/linux/swap.h b/include/linux/swap.h
index d9e362c7439c..d12ecacce307 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -338,8 +338,6 @@ extern void lru_note_cost(struct lruvec *lruvec, bool file,
unsigned int nr_pages);
extern void lru_note_cost_page(struct page *);
extern void lru_cache_add(struct page *);
-extern void lru_add_page_tail(struct page *page, struct page *page_tail,
- struct lruvec *lruvec, struct list_head *head);
extern void activate_page(struct page *);
extern void mark_page_accessed(struct page *);
extern void lru_add_drain(void);
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 21e6687895e2..4c3990ba29cb 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2316,6 +2316,36 @@ static void remap_page(struct page *page)
}
}
+void lru_add_page_tail(struct page *page, struct page *page_tail,
+ struct lruvec *lruvec, struct list_head *list)
+{
+ VM_BUG_ON_PAGE(!PageHead(page), page);
+ VM_BUG_ON_PAGE(PageCompound(page_tail), page);
+ VM_BUG_ON_PAGE(PageLRU(page_tail), page);
+ lockdep_assert_held(&lruvec_pgdat(lruvec)->lru_lock);
+
+ if (!list)
+ SetPageLRU(page_tail);
+
+ if (likely(PageLRU(page)))
+ list_add_tail(&page_tail->lru, &page->lru);
+ else if (list) {
+ /* page reclaim is reclaiming a huge page */
+ get_page(page_tail);
+ list_add_tail(&page_tail->lru, list);
+ } else {
+ /*
+ * Head page has not yet been counted, as an hpage,
+ * so we must account for each subpage individually.
+ *
+ * Put page_tail on the list at the correct position
+ * so they all end up in order.
+ */
+ add_page_to_lru_list_tail(page_tail, lruvec,
+ page_lru(page_tail));
+ }
+}
+
static void __split_huge_page_tail(struct page *head, int tail,
struct lruvec *lruvec, struct list_head *list)
{
diff --git a/mm/swap.c b/mm/swap.c
index acd88873f076..ffb4ea7b82b5 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -880,39 +880,6 @@ void __pagevec_release(struct pagevec *pvec)
}
EXPORT_SYMBOL(__pagevec_release);
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-/* used by __split_huge_page_refcount() */
-void lru_add_page_tail(struct page *page, struct page *page_tail,
- struct lruvec *lruvec, struct list_head *list)
-{
- VM_BUG_ON_PAGE(!PageHead(page), page);
- VM_BUG_ON_PAGE(PageCompound(page_tail), page);
- VM_BUG_ON_PAGE(PageLRU(page_tail), page);
- lockdep_assert_held(&lruvec_pgdat(lruvec)->lru_lock);
-
- if (!list)
- SetPageLRU(page_tail);
-
- if (likely(PageLRU(page)))
- list_add_tail(&page_tail->lru, &page->lru);
- else if (list) {
- /* page reclaim is reclaiming a huge page */
- get_page(page_tail);
- list_add_tail(&page_tail->lru, list);
- } else {
- /*
- * Head page has not yet been counted, as an hpage,
- * so we must account for each subpage individually.
- *
- * Put page_tail on the list at the correct position
- * so they all end up in order.
- */
- add_page_to_lru_list_tail(page_tail, lruvec,
- page_lru(page_tail));
- }
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
static void __pagevec_lru_add_fn(struct page *page, struct lruvec *lruvec,
void *arg)
{
--
1.8.3.1
next prev parent reply other threads:[~2020-05-28 11:02 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-28 11:00 [PATCH v11 00/16] per memcg lru lock Alex Shi
2020-05-28 11:00 ` [PATCH v11 01/16] mm/vmscan: remove unnecessary lruvec adding Alex Shi
2020-05-28 11:00 ` [PATCH v11 02/16] mm/page_idle: no unlikely double check for idle page counting Alex Shi
2020-05-28 11:00 ` [PATCH v11 03/16] mm/compaction: correct the comments of compact_defer_shift Alex Shi
2020-05-28 11:00 ` [PATCH v11 04/16] mm/compaction: rename compact_deferred as compact_should_defer Alex Shi
2020-05-28 11:00 ` Alex Shi [this message]
2020-05-28 11:00 ` [PATCH v11 06/16] mm/thp: clean up lru_add_page_tail Alex Shi
2020-05-28 11:00 ` [PATCH v11 07/16] mm/thp: narrow lru locking Alex Shi
2020-05-28 11:00 ` [PATCH v11 08/16] mm/memcg: add debug checking in lock_page_memcg Alex Shi
2020-05-28 11:00 ` [PATCH v11 09/16] mm/lru: introduce TestClearPageLRU Alex Shi
2020-05-28 11:00 ` [PATCH v11 10/16] mm/compaction: do page isolation first in compaction Alex Shi
2020-05-28 11:00 ` [PATCH v11 11/16] mm/mlock: reorder isolation sequence during munlock Alex Shi
2020-05-28 11:00 ` [PATCH v11 12/16] mm/lru: replace pgdat lru_lock with lruvec lock Alex Shi
2020-05-28 11:00 ` [PATCH v11 13/16] mm/lru: introduce the relock_page_lruvec function Alex Shi
2020-05-28 11:00 ` [PATCH v11 14/16] mm/vmscan: use relock for move_pages_to_lru Alex Shi
2020-05-28 11:00 ` [PATCH v11 15/16] mm/pgdat: remove pgdat lru_lock Alex Shi
2020-05-28 11:00 ` [PATCH v11 16/16] mm/lru: revise the comments of lru_lock Alex Shi
2020-06-08 4:15 ` [PATCH v11 00/16] per memcg lru lock Hugh Dickins
2020-06-08 6:13 ` Alex Shi
2020-06-10 3:22 ` Hugh Dickins
2020-06-11 6:06 ` Alex Shi
2020-06-11 22:09 ` Hugh Dickins
2020-06-12 10:43 ` Alex Shi
2020-06-16 6:14 ` Alex Shi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590663658-184131-6-git-send-email-alex.shi@linux.alibaba.com \
--to=alex.shi@linux.alibaba.com \
--cc=akpm@linux-foundation.org \
--cc=cgroups@vger.kernel.org \
--cc=daniel.m.jordan@oracle.com \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=khlebnikov@yandex-team.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lkp@intel.com \
--cc=mgorman@techsingularity.net \
--cc=richard.weiyang@gmail.com \
--cc=shakeelb@google.com \
--cc=tj@kernel.org \
--cc=willy@infradead.org \
--cc=yang.shi@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).