linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Anshuman Khandual <anshuman.khandual@arm.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: akpm@linux-foundation.org, suzuki.poulose@arm.com,
	mark.rutland@arm.com, will@kernel.org, catalin.marinas@arm.com,
	maz@kernel.org, james.morse@arm.com, steven.price@arm.com,
	Anshuman Khandual <anshuman.khandual@arm.com>
Subject: [RFC V2 07/10] arm64/mm: Detect and enable FEAT_LPA2
Date: Mon, 26 Jul 2021 12:07:22 +0530	[thread overview]
Message-ID: <1627281445-12445-8-git-send-email-anshuman.khandual@arm.com> (raw)
In-Reply-To: <1627281445-12445-1-git-send-email-anshuman.khandual@arm.com>

Detect FEAT_LPA2 implementation early enough during boot when requested via
CONFIG_ARM64_PA_BITS_52_LPA2 and remember in a variable arm64_lpa2_enabled.
This variable could then be used to turn on TCR_EL1.TCR_DS effecting the 52
bits PA range or fall back to default 48 bits PA range if FEAT_LPA2 feature
was requested but found not to be implemented.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
 arch/arm64/include/asm/memory.h |  1 +
 arch/arm64/kernel/head.S        | 15 +++++++++++++++
 arch/arm64/mm/mmu.c             |  3 +++
 arch/arm64/mm/proc.S            |  9 +++++++++
 4 files changed, 28 insertions(+)

diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 824a365..d0ca002 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -178,6 +178,7 @@
 #include <asm/bug.h>
 
 extern u64			vabits_actual;
+extern u64			arm64_lpa2_enabled;
 
 extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index c5c994a..efc6e41 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -94,6 +94,21 @@ SYM_CODE_START(primary_entry)
 	adrp	x23, __PHYS_OFFSET
 	and	x23, x23, MIN_KIMG_ALIGN - 1	// KASLR offset, defaults to 0
 	bl	set_cpu_boot_mode_flag
+
+#ifdef CONFIG_ARM64_PA_BITS_52_LPA2
+	mrs     x10, ID_AA64MMFR0_EL1
+	ubfx    x10, x10, #ID_AA64MMFR0_TGRAN_SHIFT, 4
+	cmp     x10, #ID_AA64MMFR0_TGRAN_LPA2
+	b.lt	1f
+
+	mov	x10, #1
+	adr_l	x11, arm64_lpa2_enabled
+	str	x10, [x11]
+	dmb	sy
+	dc	ivac, x11
+1:
+#endif /* CONFIG_ARM64_PA_BITS_52_LPA2 */
+
 	bl	__create_page_tables
 	/*
 	 * The following calls CPU setup code, see arch/arm64/mm/proc.S for
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 9ff0de1..8f6dcbd 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -48,6 +48,9 @@ u64 idmap_ptrs_per_pgd = PTRS_PER_PGD;
 u64 __section(".mmuoff.data.write") vabits_actual;
 EXPORT_SYMBOL(vabits_actual);
 
+u64 __section(".mmuoff.data.write") arm64_lpa2_enabled;
+EXPORT_SYMBOL(arm64_lpa2_enabled);
+
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 1ae0c2b..672880c 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -423,6 +423,15 @@ SYM_FUNC_START(__cpu_setup)
 			TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
 			TCR_TBI0 | TCR_A1 | TCR_KASAN_SW_FLAGS
 
+#ifdef CONFIG_ARM64_PA_BITS_52_LPA2
+	ldr_l   x10, arm64_lpa2_enabled
+	cmp	x10, #1
+	b.ne	1f
+	mov_q	x10, TCR_DS
+	orr	tcr, tcr, x10
+1:
+#endif /* CONFIG_ARM64_PA_BITS_52_LPA2 */
+
 #ifdef CONFIG_ARM64_MTE
 	/*
 	 * Update MAIR_EL1, GCR_EL1 and TFSR*_EL1 if MTE is supported
-- 
2.7.4



  parent reply	other threads:[~2021-07-26  6:37 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26  6:37 [RFC V2 00/10] arm64/mm: Enable FEAT_LPA2 (52 bits PA support on 4K|16K pages) Anshuman Khandual
2021-07-26  6:37 ` [RFC V2 01/10] mm/mmap: Dynamically initialize protection_map[] Anshuman Khandual
2021-08-05 17:03   ` Catalin Marinas
2021-08-12  9:15     ` Anshuman Khandual
2021-08-13  7:16       ` Anshuman Khandual
2021-07-26  6:37 ` [RFC V2 02/10] arm64/mm: Consolidate TCR_EL1 fields Anshuman Khandual
2021-08-05 17:05   ` Catalin Marinas
2021-07-26  6:37 ` [RFC V2 03/10] arm64/mm: Add FEAT_LPA2 specific TCR_EL1.DS field Anshuman Khandual
2021-08-05 17:06   ` Catalin Marinas
2021-07-26  6:37 ` [RFC V2 04/10] arm64/mm: Add FEAT_LPA2 specific ID_AA64MMFR0.TGRAN[2] Anshuman Khandual
2021-08-05 17:06   ` Catalin Marinas
2021-07-26  6:37 ` [RFC V2 05/10] arm64/mm: Add CONFIG_ARM64_PA_BITS_52_[LPA|LPA2] Anshuman Khandual
2021-08-05 17:25   ` Catalin Marinas
2021-08-12 10:09     ` Anshuman Khandual
2021-07-26  6:37 ` [RFC V2 06/10] arm64/mm: Add FEAT_LPA2 specific encoding Anshuman Khandual
2021-07-26  6:37 ` Anshuman Khandual [this message]
2021-07-26  6:37 ` [RFC V2 08/10] arm64/mm: Add FEAT_LPA2 specific PTE_SHARED and PMD_SECT_S Anshuman Khandual
2021-07-26  6:37 ` [RFC V2 09/10] arm64/mm: Add FEAT_LPA2 specific fallback (48 bits PA) when not implemented Anshuman Khandual
2021-07-26  6:37 ` [RFC V2 10/10] arm64/mm: Enable CONFIG_ARM64_PA_BITS_52 on CONFIG_ARM64_[4K|16K]_PAGES Anshuman Khandual
2021-08-05 17:23   ` Catalin Marinas
2021-08-12  9:13     ` Anshuman Khandual

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1627281445-12445-8-git-send-email-anshuman.khandual@arm.com \
    --to=anshuman.khandual@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=catalin.marinas@arm.com \
    --cc=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=steven.price@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).