From: Paul Cercueil <paul@crapouillou.net>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>,
devicetree@vger.kernel.org, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/9] mtd: rawnand: Move drivers for Ingenic SoCs to subfolder
Date: Sat, 9 Feb 2019 16:22:59 -0300 [thread overview]
Message-ID: <20190209192305.4434-3-paul@crapouillou.net> (raw)
In-Reply-To: <20190209192305.4434-1-paul@crapouillou.net>
Before adding support for more SoCs and seeing the number of files for
these drivers grow, we move them to their own subfolder to keep it tidy.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Changes:
v2: New patch
v3: No change
v4: No change
drivers/mtd/nand/raw/Kconfig | 14 +-------------
drivers/mtd/nand/raw/Makefile | 3 +--
drivers/mtd/nand/raw/ingenic/Kconfig | 13 +++++++++++++
drivers/mtd/nand/raw/ingenic/Makefile | 2 ++
drivers/mtd/nand/raw/{ => ingenic}/jz4740_nand.c | 0
drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.c | 0
drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.h | 0
drivers/mtd/nand/raw/{ => ingenic}/jz4780_nand.c | 0
8 files changed, 17 insertions(+), 15 deletions(-)
create mode 100644 drivers/mtd/nand/raw/ingenic/Kconfig
create mode 100644 drivers/mtd/nand/raw/ingenic/Makefile
rename drivers/mtd/nand/raw/{ => ingenic}/jz4740_nand.c (100%)
rename drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.c (100%)
rename drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.h (100%)
rename drivers/mtd/nand/raw/{ => ingenic}/jz4780_nand.c (100%)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 1a55d3e3d4c5..d886be2fc174 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -470,19 +470,7 @@ config MTD_NAND_NUC900
This enables the driver for the NAND Flash on evaluation board based
on w90p910 / NUC9xx.
-config MTD_NAND_JZ4740
- tristate "Support for JZ4740 SoC NAND controller"
- depends on MACH_JZ4740 || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Enables support for NAND Flash on JZ4740 SoC based boards.
-
-config MTD_NAND_JZ4780
- tristate "Support for NAND on JZ4780 SoC"
- depends on JZ4780_NEMC
- help
- Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
- based boards, using the BCH controller for hardware error correction.
+source "drivers/mtd/nand/raw/ingenic/Kconfig"
config MTD_NAND_FSMC
tristate "Support for NAND on ST Micros FSMC"
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 57159b349054..f419d373d090 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -45,8 +45,7 @@ obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
-obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
-obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
+obj-y += ingenic/
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
new file mode 100644
index 000000000000..67806c87b2c4
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -0,0 +1,13 @@
+config MTD_NAND_JZ4740
+ tristate "Support for JZ4740 SoC NAND controller"
+ depends on MACH_JZ4740 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_JZ4780
+ tristate "Support for NAND on JZ4780 SoC"
+ depends on JZ4780_NEMC
+ help
+ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+ based boards, using the BCH controller for hardware error correction.
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
new file mode 100644
index 000000000000..44c2ca053d24
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
similarity index 100%
rename from drivers/mtd/nand/raw/jz4740_nand.c
rename to drivers/mtd/nand/raw/ingenic/jz4740_nand.c
diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
similarity index 100%
rename from drivers/mtd/nand/raw/jz4780_bch.c
rename to drivers/mtd/nand/raw/ingenic/jz4780_bch.c
diff --git a/drivers/mtd/nand/raw/jz4780_bch.h b/drivers/mtd/nand/raw/ingenic/jz4780_bch.h
similarity index 100%
rename from drivers/mtd/nand/raw/jz4780_bch.h
rename to drivers/mtd/nand/raw/ingenic/jz4780_bch.h
diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
similarity index 100%
rename from drivers/mtd/nand/raw/jz4780_nand.c
rename to drivers/mtd/nand/raw/ingenic/jz4780_nand.c
--
2.11.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-02-09 19:23 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-09 19:22 [PATCH v4 1/9] dt-bindings: mtd: ingenic: Add compatible strings for JZ4740 and JZ4725B Paul Cercueil
2019-02-09 19:22 ` [PATCH v4 2/9] dt-bindings: mtd: ingenic: Change 'BCH' to 'ECC' in documentation Paul Cercueil
2019-02-13 21:46 ` Rob Herring
2019-03-04 9:50 ` Miquel Raynal
2019-03-04 18:23 ` Paul Cercueil
2019-03-04 18:58 ` Miquel Raynal
2019-03-13 12:59 ` Paul Cercueil
2019-03-13 13:12 ` Miquel Raynal
2019-02-09 19:22 ` Paul Cercueil [this message]
2019-02-09 19:23 ` [PATCH v4 4/9] mtd: rawnand: ingenic: Use SPDX license notifiers Paul Cercueil
2019-02-09 19:23 ` [PATCH v4 5/9] mtd: rawnand: ingenic: Rename jz4780_nand driver to ingenic_nand Paul Cercueil
2019-02-09 19:23 ` [PATCH v4 6/9] mtd: rawnand: ingenic: Separate top-level and SoC specific code Paul Cercueil
2019-03-04 10:20 ` Miquel Raynal
2019-03-04 18:26 ` Paul Cercueil
2019-03-04 19:04 ` Miquel Raynal
2019-02-09 19:23 ` [PATCH v4 7/9] mtd: rawnand: ingenic: Add support for the JZ4740 Paul Cercueil
2019-03-04 10:34 ` Miquel Raynal
2019-03-04 18:28 ` Paul Cercueil
2019-03-04 19:07 ` Miquel Raynal
2019-02-09 19:23 ` [PATCH v4 8/9] mtd: rawnand: ingenic: Add support for the JZ4725B Paul Cercueil
2019-03-04 10:35 ` Miquel Raynal
2019-03-04 18:30 ` Paul Cercueil
2019-03-04 19:09 ` Miquel Raynal
2019-03-13 12:46 ` Paul Cercueil
2019-02-09 19:23 ` [PATCH v4 9/9] mtd: rawnand: ingenic: Add ooblayout for the Qi Ben Nanonote Paul Cercueil
2019-02-13 21:45 ` [PATCH v4 1/9] dt-bindings: mtd: ingenic: Add compatible strings for JZ4740 and JZ4725B Rob Herring
2019-03-04 9:45 ` Miquel Raynal
2019-03-04 18:22 ` Paul Cercueil
2019-03-04 18:51 ` Miquel Raynal
2019-03-13 12:55 ` Paul Cercueil
2019-03-13 13:09 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190209192305.4434-3-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=harveyhuntnexus@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).