linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <boris.brezillon@collabora.com>, <marek.vasut@gmail.com>,
	<vigneshr@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: Tudor.Ambarus@microchip.com
Subject: [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
Date: Mon, 26 Aug 2019 12:08:38 +0000	[thread overview]
Message-ID: <20190826120821.16351-5-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190826120821.16351-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

All flash parameters and settings should reside inside
'struct spi_nor_flash_parameter'. Move the SMPT parsed erase map
from 'struct spi_nor' to 'struct spi_nor_flash_parameter'.

Please note that there is a roll-back mechanism for the flash
parameter and settings, for cases when SFDP parser fails. The SFDP
parser receives a Stack allocated copy of nor->params, called
sfdp_params, and uses it to retrieve the serial flash discoverable
parameters. JESD216 SFDP is a standard and has a higher priority
than the default initialized flash parameters, so will overwrite the
sfdp_params data when needed. All SFDP code uses the local copy of
nor->params, that will overwrite it in the end, if the parser succeds.

Saving and restoring the nor->params.erase_map is no longer needed,
since the SFDP code does not touch it.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v3: Collect R-b

 drivers/mtd/spi-nor/spi-nor.c | 40 +++++++++++++++++++++-------------------
 include/linux/mtd/spi-nor.h   |  8 +++++---
 2 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index effda372cb33..9dd6cd8cd13c 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -600,7 +600,7 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
 	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
 
 	if (!spi_nor_has_uniform_erase(nor)) {
-		struct spi_nor_erase_map *map = &nor->erase_map;
+		struct spi_nor_erase_map *map = &nor->params.erase_map;
 		struct spi_nor_erase_type *erase;
 		int i;
 
@@ -1133,7 +1133,7 @@ static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
 				       struct list_head *erase_list,
 				       u64 addr, u32 len)
 {
-	const struct spi_nor_erase_map *map = &nor->erase_map;
+	const struct spi_nor_erase_map *map = &nor->params.erase_map;
 	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
 	struct spi_nor_erase_region *region;
 	struct spi_nor_erase_command *cmd = NULL;
@@ -3328,7 +3328,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 			      const struct sfdp_parameter_header *bfpt_header,
 			      struct spi_nor_flash_parameter *params)
 {
-	struct spi_nor_erase_map *map = &nor->erase_map;
+	struct spi_nor_erase_map *map = &params->erase_map;
 	struct spi_nor_erase_type *erase_type = map->erase_type;
 	struct sfdp_bfpt bfpt;
 	size_t len;
@@ -3409,7 +3409,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	 * Erase Types defined in the bfpt table.
 	 */
 	erase_mask = 0;
-	memset(&nor->erase_map, 0, sizeof(nor->erase_map));
+	memset(&params->erase_map, 0, sizeof(params->erase_map));
 	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
 		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
 		u32 erasesize;
@@ -3684,14 +3684,18 @@ spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
 /**
  * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
  * @nor:	pointer to a 'struct spi_nor'
+ * @params:     pointer to a duplicate 'struct spi_nor_flash_parameter' that is
+ *              used for storing SFDP parsed data
  * @smpt:	pointer to the sector map parameter table
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
-					      const u32 *smpt)
+static int
+spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+				   struct spi_nor_flash_parameter *params,
+				   const u32 *smpt)
 {
-	struct spi_nor_erase_map *map = &nor->erase_map;
+	struct spi_nor_erase_map *map = &params->erase_map;
 	struct spi_nor_erase_type *erase = map->erase_type;
 	struct spi_nor_erase_region *region;
 	u64 offset;
@@ -3770,6 +3774,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
  * spi_nor_parse_smpt() - parse Sector Map Parameter Table
  * @nor:		pointer to a 'struct spi_nor'
  * @smpt_header:	sector map parameter table header
+ * @params:		pointer to a duplicate 'struct spi_nor_flash_parameter'
+ *                      that is used for storing SFDP parsed data
  *
  * This table is optional, but when available, we parse it to identify the
  * location and size of sectors within the main data array of the flash memory
@@ -3778,7 +3784,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
  * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_parse_smpt(struct spi_nor *nor,
-			      const struct sfdp_parameter_header *smpt_header)
+			      const struct sfdp_parameter_header *smpt_header,
+			      struct spi_nor_flash_parameter *params)
 {
 	const u32 *sector_map;
 	u32 *smpt;
@@ -3807,11 +3814,11 @@ static int spi_nor_parse_smpt(struct spi_nor *nor,
 		goto out;
 	}
 
-	ret = spi_nor_init_non_uniform_erase_map(nor, sector_map);
+	ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
 	if (ret)
 		goto out;
 
-	spi_nor_regions_sort_erase_types(&nor->erase_map);
+	spi_nor_regions_sort_erase_types(&params->erase_map);
 	/* fall through */
 out:
 	kfree(smpt);
@@ -3867,7 +3874,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 		{ 0u /* not used */,		BIT(12) },
 	};
 	struct spi_nor_pp_command *params_pp = params->page_programs;
-	struct spi_nor_erase_map *map = &nor->erase_map;
+	struct spi_nor_erase_map *map = &params->erase_map;
 	struct spi_nor_erase_type *erase_type = map->erase_type;
 	u32 *dwords;
 	size_t len;
@@ -4097,7 +4104,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
 
 		switch (SFDP_PARAM_HEADER_ID(param_header)) {
 		case SFDP_SECTOR_MAP_ID:
-			err = spi_nor_parse_smpt(nor, param_header);
+			err = spi_nor_parse_smpt(nor, param_header, params);
 			break;
 
 		case SFDP_4BAIT_ID:
@@ -4129,7 +4136,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
 static int spi_nor_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = &nor->params;
-	struct spi_nor_erase_map *map = &nor->erase_map;
+	struct spi_nor_erase_map *map = &params->erase_map;
 	const struct flash_info *info = nor->info;
 	u8 i, erase_mask;
 
@@ -4229,17 +4236,12 @@ static int spi_nor_init_params(struct spi_nor *nor)
 	if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
 	    !(info->flags & SPI_NOR_SKIP_SFDP)) {
 		struct spi_nor_flash_parameter sfdp_params;
-		struct spi_nor_erase_map prev_map;
 
 		memcpy(&sfdp_params, params, sizeof(sfdp_params));
-		memcpy(&prev_map, &nor->erase_map, sizeof(prev_map));
 
 		if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
 			nor->addr_width = 0;
 			nor->flags &= ~SNOR_F_4B_OPCODES;
-			/* restore previous erase map */
-			memcpy(&nor->erase_map, &prev_map,
-			       sizeof(nor->erase_map));
 		} else {
 			memcpy(params, &sfdp_params, sizeof(*params));
 		}
@@ -4353,7 +4355,7 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
 
 static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
 {
-	struct spi_nor_erase_map *map = &nor->erase_map;
+	struct spi_nor_erase_map *map = &nor->params.erase_map;
 	const struct spi_nor_erase_type *erase = NULL;
 	struct mtd_info *mtd = &nor->mtd;
 	int i;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 17787238f0e9..a86c0d9fb01d 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -479,6 +479,8 @@ struct spi_nor;
  *                      in the array, the higher priority.
  * @page_programs:	page program capabilities ordered by priority: the
  *                      higher index in the array, the higher priority.
+ * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
+ *                      Table.
  * @quad_enable:	enables SPI NOR quad mode.
  */
 struct spi_nor_flash_parameter {
@@ -489,6 +491,8 @@ struct spi_nor_flash_parameter {
 	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
 	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
 
+	struct spi_nor_erase_map        erase_map;
+
 	int (*quad_enable)(struct spi_nor *nor);
 };
 
@@ -519,7 +523,6 @@ struct flash_info;
  * @read_proto:		the SPI protocol for read operations
  * @write_proto:	the SPI protocol for write operations
  * @reg_proto		the SPI protocol for read_reg/write_reg/erase operations
- * @erase_map:		the erase map of the SPI NOR
  * @prepare:		[OPTIONAL] do some preparations for the
  *			read/write/erase/lock/unlock operations
  * @unprepare:		[OPTIONAL] do some post work after the
@@ -562,7 +565,6 @@ struct spi_nor {
 	enum spi_nor_protocol	reg_proto;
 	bool			sst_write_second;
 	u32			flags;
-	struct spi_nor_erase_map	erase_map;
 
 	int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
 	void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
@@ -610,7 +612,7 @@ spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
 
 static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
 {
-	return !!nor->erase_map.uniform_erase_type;
+	return !!nor->params.erase_map.uniform_erase_type;
 }
 
 static inline void spi_nor_set_flash_node(struct spi_nor *nor,
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2019-08-26 12:09 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27  4:21   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27  4:31   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27  4:47   ` Vignesh Raghavendra
2019-08-26 12:08 ` Tudor.Ambarus [this message]
2019-08-26 12:38   ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Boris Brezillon
2019-08-27  5:39   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27  5:48   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27  5:54   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27  6:00   ` Vignesh Raghavendra
2019-08-27  7:01     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27  6:07   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27  6:36   ` Vignesh Raghavendra
2019-08-27  6:58     ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27  7:08   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:10   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27  7:13   ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40   ` Boris Brezillon
2019-08-26 13:38     ` Schrempf Frieder
2019-08-26 14:02       ` Boris Brezillon
2019-08-26 14:37         ` Schrempf Frieder
2019-08-27  7:16   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27  7:18   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus
2019-08-27  7:48   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27  7:35   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27  7:37   ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49   ` Boris Brezillon
2019-08-27  5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190826120821.16351-5-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).