linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Daniel Gutson <daniel@eclypsium.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	Richard Hughes <hughsient@gmail.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-mtd <linux-mtd@lists.infradead.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Derek Kiernan <derek.kiernan@xilinx.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Alex Bazhaniuk <alex@eclypsium.com>
Subject: Re: [PATCH] mtd: spi-nor: intel-spi: Split intel-spi reading from writing
Date: Tue, 3 Nov 2020 17:08:42 +0100	[thread overview]
Message-ID: <20201103160842.GA4153227@kroah.com> (raw)
In-Reply-To: <CAFmMkTHniN8FA7KkknDyRU0E0JWP15dC-xMRqJb-rg8oEgCyYg@mail.gmail.com>

On Tue, Nov 03, 2020 at 12:18:01PM -0300, Daniel Gutson wrote:
> On Thu, Oct 29, 2020 at 4:14 PM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Thu, Oct 29, 2020 at 12:39:08PM -0300, Daniel Gutson wrote:
> > > On Thu, Oct 29, 2020 at 2:40 AM Greg Kroah-Hartman
> > > <gregkh@linuxfoundation.org> wrote:
> > > >
> > > > On Wed, Oct 28, 2020 at 06:43:59PM -0300, Daniel Gutson wrote:
> > > > > This patch separates the writing part of the intel-spi drivers
> > > > > so the 'dangerous' part can be set/unset independently.
> > > > > This way, the kernel can be configured to include the reading
> > > > > parts of the driver which can be used without
> > > > > the dangerous write operations that can turn the system
> > > > > unbootable.
> > > > >
> > > > > Signed-off-by: Daniel Gutson <daniel.gutson@eclypsium.com>
> > > > > ---
> > > > >  drivers/mtd/spi-nor/controllers/Kconfig     | 39 ++++++++++++---------
> > > > >  drivers/mtd/spi-nor/controllers/intel-spi.c | 12 +++++--
> > > > >  2 files changed, 33 insertions(+), 18 deletions(-)
> > > > >
> > > > > diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig
> > > > > index 5c0e0ec2e6d1..491c755fea49 100644
> > > > > --- a/drivers/mtd/spi-nor/controllers/Kconfig
> > > > > +++ b/drivers/mtd/spi-nor/controllers/Kconfig
> > > > > @@ -31,34 +31,41 @@ config SPI_INTEL_SPI
> > > > >       tristate
> > > > >
> > > > >  config SPI_INTEL_SPI_PCI
> > > > > -     tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
> > > > > +     tristate "Intel PCH/PCU SPI flash PCI driver"
> > > > >       depends on X86 && PCI
> > > > >       select SPI_INTEL_SPI
> > > > >       help
> > > > > -       This enables PCI support for the Intel PCH/PCU SPI controller in
> > > > > -       master mode. This controller is present in modern Intel hardware
> > > > > -       and is used to hold BIOS and other persistent settings. Using
> > > > > -       this driver it is possible to upgrade BIOS directly from Linux.
> > > > > -
> > > > > -       Say N here unless you know what you are doing. Overwriting the
> > > > > -       SPI flash may render the system unbootable.
> > > > > +       This enables read only PCI support for the Intel PCH/PCU SPI
> > > > > +       controller in master mode. This controller is present in modern
> > > > > +       Intel hardware and is used to hold BIOS and other persistent settings.
> > > > > +       Using this driver it is possible to read the SPI chip directly
> > > > > +       from Linux.
> > > > >
> > > > >         To compile this driver as a module, choose M here: the module
> > > > >         will be called intel-spi-pci.
> > > > >
> > > > >  config SPI_INTEL_SPI_PLATFORM
> > > > > -     tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
> > > > > +     tristate "Intel PCH/PCU SPI flash platform driver"
> > > > >       depends on X86
> > > > >       select SPI_INTEL_SPI
> > > > >       help
> > > > > -       This enables platform support for the Intel PCH/PCU SPI
> > > > > +       This enables read only platform support for the Intel PCH/PCU SPI
> > > > >         controller in master mode. This controller is present in modern
> > > > > -       Intel hardware and is used to hold BIOS and other persistent
> > > > > -       settings. Using this driver it is possible to upgrade BIOS
> > > > > -       directly from Linux.
> > > > > +       Intel hardware and is used to hold BIOS and other persistent settings.
> > > > > +       Using this driver it is possible to read the SPI chip directly
> > > > > +       from Linux.
> > > > > +
> > > > > +       To compile this driver as a module, choose M here: the module
> > > > > +       will be called intel-spi-pci.
> > > > > +
> > > > > +config SPI_INTEL_SPI_WRITE
> > > > > +     bool "Intel PCH/PCU SPI flash drivers write operations (DANGEROUS)"
> > > > > +     depends on SPI_INTEL_SPI_PCI || SPI_INTEL_SPI_PLATFORM
> > > > > +     help
> > > > > +       This enables full read/write support for the Intel PCH/PCU SPI
> > > > > +       controller.
> > > > > +       Using this option it may be possible to upgrade BIOS directly
> > > > > +       from Linux.
> > > > >
> > > > >         Say N here unless you know what you are doing. Overwriting the
> > > > >         SPI flash may render the system unbootable.
> > > > > -
> > > > > -       To compile this driver as a module, choose M here: the module
> > > > > -       will be called intel-spi-platform.
> > > > > diff --git a/drivers/mtd/spi-nor/controllers/intel-spi.c b/drivers/mtd/spi-nor/controllers/intel-spi.c
> > > > > index b54a56a68100..8d8053395c3d 100644
> > > > > --- a/drivers/mtd/spi-nor/controllers/intel-spi.c
> > > > > +++ b/drivers/mtd/spi-nor/controllers/intel-spi.c
> > > > > @@ -266,6 +266,7 @@ static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size)
> > > > >       return 0;
> > > > >  }
> > > > >
> > > > > +#ifdef CONFIG_SPI_INTEL_SPI_WRITE
> > > >
> > > > <snip>
> > > >
> > > > Please do not add #ifdef to .c files, that's not the proper kernel
> > > > coding style at all, and just makes maintaining this file much much
> > > > harder over time.
> > > >
> > > > Split things out into two different files if you really need to do this.
> > >
> > > What about the static functions that I'll need to turn non-static and
> > > in a header file?
> > > I mean, the functions that the functions in the new file will have to call.
> > > Should I do that, turn static functions into non-static and declared
> > > in a header file?
> >
> > No idea, but again, no #ifdefs in .c files like this, that is not the
> > proper kernel coding style as it is not maintainable for the lifespan
> > that we have to maintain code.
> 
> Is it acceptable to leave static functions unused and let the optimizer
> remove them as DCE?

You will get build warnings if you do that, right?

You have thousands of examples of how to do this correct, it shouldn't
be that tough :)

thanks,

greg k-h

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-11-03 16:09 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-28 21:43 [PATCH] mtd: spi-nor: intel-spi: Split intel-spi reading from writing Daniel Gutson
2020-10-29  5:41 ` Greg Kroah-Hartman
2020-10-29 15:39   ` Daniel Gutson
2020-10-29 19:15     ` Greg Kroah-Hartman
2020-11-03 15:18       ` Daniel Gutson
2020-11-03 16:08         ` Greg Kroah-Hartman [this message]
2020-11-03 16:15           ` Daniel Gutson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201103160842.GA4153227@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=alex@eclypsium.com \
    --cc=arnd@arndb.de \
    --cc=daniel@eclypsium.com \
    --cc=derek.kiernan@xilinx.com \
    --cc=hughsient@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).