From: John Garry <john.garry@huawei.com>
To: <Tudor.Ambarus@microchip.com>, <linux-mtd@lists.infradead.org>
Cc: broonie@kernel.org, fengsheng5@huawei.com
Subject: Re: flash_lock issue for n25q 128mb spi nor part
Date: Tue, 3 Dec 2019 15:29:08 +0000 [thread overview]
Message-ID: <32a6af31-341b-67cf-a98d-d77a495c7ecc@huawei.com> (raw)
In-Reply-To: <9d41bfca-f4e3-beb2-ff7f-78be49e8d80e@microchip.com>
>>
>> Here's an example flow (with my hack to stop using 16b SR method):
>>
>> root@ubuntu:/home/john# flash_lock -l /dev/mtd0
>> root@ubuntu:/home/john# mtd_debug erase /dev/mtd0 0xe00000 4096
>> [ 69.650642] spi-nor spi-PRP0001:00: at 0xe00000, len 4096
>> Erased 4096 bytes from address 0x00e00000 in flash
>> root@ubuntu:/home/john# mtd_debug write /dev/mtd0 0xe00000 4096 dump4096
>> [ 77.093755] spi-nor spi-PRP0001:00: to 0x00e00000, len 4096
>> Copied 4096 bytes from dump4096 to address 0x00e00000 in flash
>> root@ubuntu:/home/john# mtd_debug read /dev/mtd0 0xe00000 4096 temp
>> [ 82.162445] spi-nor spi-PRP0001:00: from 0x00e00000, len 4096
>> Copied 4096 bytes from address 0x00e00000 in flash to temp
>> root@ubuntu:/home/john# flash_lock -u /dev/mtd0
>> [ 87.558435] spi-nor spi-PRP0001:00: SR1: read back test failed
>> flash_lock: error!: could not unlock device: /dev/mtd0
>>
>> error 5 (Input/output error)
>> root@ubuntu:/home/john#
>>
>> Unlock reports an error as the the read back test in
>> spi_nor_write_sr1_and_check() fails as the SR.WEL has never been cleared.
>>
>
> Interesting.
I note that spi_nor_erase() exits with a call to
spi_nor_write_disable(), yet spi_nor_write() doesn't - maybe we should
add a similar call there.
>
>
> Does the following do the trick?
>
> - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K |
> SPI_NOR_QUAD_READ) },
> + { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | USE_FSR |
> + SPI_NOR_QUAD_READ) },
>
I'll give it a spin - along with your SR lock fix - when I get back on
the HW again.
> This can of course be extended to all micron flashes, if all support FSR, but
> some documentation work has to be made.
>
>> I'm just saying this while it's fresh in my head - I don't want to seem
>> pushy :)
>
> No worries, this is a good initiative, thanks.
>
Much appreciated,
John
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-12-03 15:29 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-02 17:28 flash_lock issue for n25q 128mb spi nor part John Garry
2019-12-03 9:45 ` Tudor.Ambarus
2019-12-03 10:31 ` John Garry
2019-12-03 11:07 ` Tudor.Ambarus
2019-12-03 11:44 ` John Garry
2019-12-03 12:05 ` Tudor.Ambarus
2019-12-03 12:27 ` Tudor.Ambarus
2019-12-03 12:35 ` John Garry
2019-12-03 13:57 ` John Garry
2019-12-03 14:44 ` Tudor.Ambarus
2019-12-03 15:29 ` John Garry [this message]
2019-12-04 11:10 ` John Garry
2019-12-16 18:09 ` Tudor.Ambarus
2019-12-17 8:57 ` Vignesh Raghavendra
2019-12-17 10:09 ` John Garry
2020-01-09 10:36 ` John Garry
2020-01-10 11:51 ` Tudor.Ambarus
2020-01-10 11:56 ` John Garry
2020-01-15 9:28 ` John Garry
2020-03-09 10:15 ` [RESEND PATCH 1/2] mtd: spi-nor: Clear WEL bit when erase or program errors occur Tudor.Ambarus
2020-03-09 10:15 ` [RESEND PATCH 2/2] mtd: spi-nor: Fix description of the sr_ready() return value Tudor.Ambarus
2020-03-09 15:04 ` [RESEND PATCH 1/2] mtd: spi-nor: Clear WEL bit when erase or program errors occur John Garry
2020-03-23 17:58 ` Tudor.Ambarus
2019-12-03 14:16 ` [PATCH] mtd: spi-nor: Fix the write Status Register on micron flashes Tudor.Ambarus
2019-12-03 14:50 ` [PATCH v2] mtd: spi-nor: Fix the writing of the " Tudor.Ambarus
2019-12-04 10:18 ` John Garry
2020-01-09 19:14 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32a6af31-341b-67cf-a98d-d77a495c7ecc@huawei.com \
--to=john.garry@huawei.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=broonie@kernel.org \
--cc=fengsheng5@huawei.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).