From: Guenter Roeck <linux@roeck-us.net>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Christoph Hellwig <hch@lst.de>, Omar Sandoval <osandov@fb.com>,
Ming Lei <ming.lei@redhat.com>, Jens Axboe <axboe@kernel.dk>
Subject: Re: linux-next: Tree for Jan 16
Date: Wed, 16 Jan 2019 12:35:47 -0800 [thread overview]
Message-ID: <20190116203547.GA788@roeck-us.net> (raw)
In-Reply-To: <20190116173838.042db659@canb.auug.org.au>
On Wed, Jan 16, 2019 at 05:38:38PM +1100, Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20190115:
>
> The vfs tree still had its build failure for which I applied a patch.
>
> The drm-misc tree gained conflicts against the drm-intel tree.
>
> The mali-dp tree still had its failure for which I applied a merge
> fix patch.
>
> The block tree gained a conflict against the fscrypt tree and build
> failures for which I applied 2 merge fix patches and a fix patch.
>
> Non-merge commits (relative to Linus' tree): 1975
> 2069 files changed, 67760 insertions(+), 30784 deletions(-)
>
Time for a damage report.
Build results:
total: 159 pass: 148 fail: 11
Failed builds:
alpha:allmodconfig
ia64:defconfig
ia64:allnoconfig
ia64:tinyconfig
powerpc:ppc6xx_defconfig
sh:defconfig
sh:allnoconfig
sh:tinyconfig
sh:dreamcast_defconfig
sh:microdev_defconfig
sh:shx3_defconfig
Qemu test results:
total: 343 pass: 230 fail: 113
[details dropped]
I won't address the build failures; I assume the culprits know through
0day. See https://kerneltests.org/builders/ for details and logs.
The main culprit of the qemu test failures is a block subsystem commit.
bisect log and bisected backtrace below. It may well be that there are
other failures in that subsystem - backtraces are not always the same.
Affected architectures are arm, mips, ppc, parisc, sparc, and x86.
sh4 may be affected as well, but all sh4 images fail to build and can
not be tested at this time.
Also, I suspect that the observed crashes may hide other failures -
I had seen some boot stalls in next-20190115 (not bisected).
Guenter
---
# bad: [cbeb3db684f72d744e74c567542faac796d9cbd8] Add linux-next specific files for 20190116
# good: [1c7fc5cbc33980acd13d668f1c8f0313d6ae9fd8] Linux 5.0-rc2
git bisect start 'HEAD' 'v5.0-rc2'
# good: [11822c837bf744c38fab8370899338884d30f30b] Merge remote-tracking branch 'nfc-next/master'
git bisect good 11822c837bf744c38fab8370899338884d30f30b
# bad: [8c4aa656d7befa3ca3c5c2856eeabc30317d9775] Merge remote-tracking branch 'apparmor/apparmor-next'
git bisect bad 8c4aa656d7befa3ca3c5c2856eeabc30317d9775
# good: [2465c219c523ed47f2adae88805d3bb68fbc51c0] Merge remote-tracking branch 'drm-misc/for-linux-next'
git bisect good 2465c219c523ed47f2adae88805d3bb68fbc51c0
# good: [afa8e20f9d4d5aacf9158b7be36ec81ec499aa5c] Merge remote-tracking branch 'sound-asoc/for-next'
git bisect good afa8e20f9d4d5aacf9158b7be36ec81ec499aa5c
# bad: [ae563d4fc73ad2cfd1408e72fd3aa67c4f5c9c8d] Merge remote-tracking branch 'kgdb/kgdb-next'
git bisect bad ae563d4fc73ad2cfd1408e72fd3aa67c4f5c9c8d
# bad: [6cb6b5a89b70120f840f37e94ee10f9b8ffdabd9] Merge remote-tracking branch 'block/for-next'
git bisect bad 6cb6b5a89b70120f840f37e94ee10f9b8ffdabd9
# bad: [93670fad03e97d5526b23fe67a3fe2be52e21732] block: kill QUEUE_FLAG_NO_SG_MERGE
git bisect bad 93670fad03e97d5526b23fe67a3fe2be52e21732
# bad: [beab05e0114623255b4d5cd3776df6da26be42b0] block: introduce bvec_last_segment()
git bisect bad beab05e0114623255b4d5cd3776df6da26be42b0
# good: [f3effe4c1240a36a487ba1ff134478236a69b32d] block: rename bvec helpers
git bisect good f3effe4c1240a36a487ba1ff134478236a69b32d
# good: [cad1e6bb0ecfebbb3168ebc46dcf5e39f7bf2268] block: introduce bio_for_each_bvec() and rq_for_each_bvec()
git bisect good cad1e6bb0ecfebbb3168ebc46dcf5e39f7bf2268
# bad: [73f4209ccda9cf3d403692517bc90d5431c1ef2d] block: use bio_for_each_bvec() to map sg
git bisect bad 73f4209ccda9cf3d403692517bc90d5431c1ef2d
# bad: [258cfdfaf7bd729e759a0a91fd00ac9794796ad3] block: use bio_for_each_bvec() to compute multi-page bvec count
git bisect bad 258cfdfaf7bd729e759a0a91fd00ac9794796ad3
# first bad commit: [258cfdfaf7bd729e759a0a91fd00ac9794796ad3] block: use bio_for_each_bvec() to compute multi-page bvec count
--
Bisected backtrace:
[ 24.745267] BUG: unable to handle kernel paging request at 0959bd38
[ 24.745267] #PF error: [normal kernel read fault]
[ 24.745267] *pde = 00000000
[ 24.745267] Oops: 0000 [#1] SMP
[ 24.745267] CPU: 0 PID: 7 Comm: kworker/u2:0 Not tainted 5.0.0-rc2-next-20190116 #1
[ 24.745267] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 24.745267] Workqueue: events_unbound async_run_entry_fn
[ 24.745267] EIP: blk_rq_map_sg+0x1cd/0x510
[ 24.745267] Code: e8 a8 f2 01 00 8b 5d d0 8b 75 e8 89 f9 03 75 cc 89 f2 f7 d2
23 93 54 03 00 00 83 c2 01 39 bb 6c 03 00 00 0f 46 8b 6c 03 00 00 <8b> 18 39 ca
0f 47 d1 89 f1 c1 ee 0c 83 e3 03 81 e1 ff 0f 00 00 89
[ 24.745267] EAX: 0959bd38 EBX: cfbfb500 ECX: 000000ff EDX: 00000000
[ 24.745267] ESI: 00000000 EDI: 000000ff EBP: cf8b3bd8 ESP: cf8b3b94
[ 24.745267] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200212
[ 24.745267] CR0: 80050033 CR2: 0959bd38 CR3: 09e72000 CR4: 003406d0
[ 24.745267] Call Trace:
[ 24.745267] scsi_init_sgtable+0x30/0x70
[ 24.745267] scsi_init_io+0x2a/0x80
[ 24.745267] scsi_queue_rq+0x64e/0xa50
[ 24.745267] blk_mq_dispatch_rq_list+0x318/0x4c0
[ 24.745267] blk_mq_do_dispatch_sched+0x6d/0xf0
[ 24.745267] blk_mq_sched_dispatch_requests+0xee/0x150
[ 24.745267] __blk_mq_run_hw_queue+0x59/0xd0
[ 24.745267] __blk_mq_delay_run_hw_queue+0x177/0x1a0
[ 24.745267] blk_mq_run_hw_queue+0x72/0xc0
[ 24.745267] ? dd_merged_requests+0xb0/0xb0
[ 24.745267] blk_mq_sched_insert_request+0x103/0x190
[ 24.745267] blk_execute_rq_nowait+0x3c/0x50
[ 24.745267] blk_execute_rq+0x52/0x80
[ 24.745267] ? blk_execute_rq_nowait+0x50/0x50
[ 24.745267] __scsi_execute+0xd9/0x1d0
[ 24.745267] scsi_vpd_inquiry+0x62/0xb0
[ 24.745267] ? regcache_read+0x12f/0x160
[ 24.745267] scsi_get_vpd_buf+0x2f/0x90
[ 24.745267] scsi_attach_vpd+0x32/0xc0
[ 24.745267] scsi_probe_and_add_lun+0xa6e/0xb70
[ 24.745267] ? __pm_runtime_resume+0x4f/0x90
[ 24.745267] __scsi_add_device+0x103/0x120
[ 24.745267] ata_scsi_scan_host+0x8e/0x1b0
[ 24.745267] async_port_probe+0x3b/0x4b
[ 24.745267] ? ata_port_probe+0x30/0x30
[ 24.745267] async_run_entry_fn+0x35/0xf0
[ 24.745267] process_one_work+0x1e4/0x530
[ 24.745267] worker_thread+0x39/0x3d0
[ 24.745267] kthread+0xf2/0x110
[ 24.745267] ? drain_workqueue+0x170/0x170
[ 24.745267] ? kthread_park+0x90/0x90
[ 24.745267] ret_from_fork+0x2e/0x38
[ 24.745267] Modules linked in:
[ 24.745267] CR2: 000000000959bd38
[ 24.745267] ---[ end trace 3e516846ce7ccae9 ]---
[ 24.745267] EIP: blk_rq_map_sg+0x1cd/0x510
[ 24.745267] Code: e8 a8 f2 01 00 8b 5d d0 8b 75 e8 89 f9 03 75 cc 89 f2 f7 d2
23 93 54 03 00 00 83 c2 01 39 bb 6c 03 00 00 0f 46 8b 6c 03 00 00 <8b> 18 39 ca
0f 47 d1 89 f1 c1 ee 0c 83 e3 03 81 e1 ff 0f 00 00 89
[ 24.745267] EAX: 0959bd38 EBX: cfbfb500 ECX: 000000ff EDX: 00000000
[ 24.745267] ESI: 00000000 EDI: 000000ff EBP: cf8b3bd8 ESP: c9e7649c
[ 24.745267] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200212
[ 24.745267] CR0: 80050033 CR2: 0959bd38 CR3: 09e72000 CR4: 003406d0
[ 24.745267] BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:34
[ 24.745267] in_atomic(): 1, irqs_disabled(): 1, pid: 7, name: kworker/u2:0
[ 24.745267] INFO: lockdep is turned off.
[ 24.745267] irq event stamp: 49332
[ 24.745267] hardirqs last enabled at (49331): [<c8c0176a>] trace_hardirqs_on_thunk+0xc/0x10
[ 24.745267] hardirqs last disabled at (49332): [<c8c0177a>] trace_hardirqs_off_thunk+0xc/0x12
[ 24.745267] softirqs last enabled at (49330): [<c983dba2>] __do_softirq+0x2c2/0x3d7
[ 24.745267] softirqs last disabled at (49323): [<c8c1d090>] call_on_stack+0x40/0x50
[ 24.745267] CPU: 0 PID: 7 Comm: kworker/u2:0 Tainted: G D 5.0.0-rc2-next-20190116 #1
[ 24.745267] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 24.745267] Workqueue: events_unbound async_run_entry_fn
[ 24.745267] Call Trace:
[ 24.745267] dump_stack+0x66/0x8e
[ 24.745267] ___might_sleep.cold.85+0x8e/0x9f
[ 24.745267] __might_sleep+0x2e/0x80
[ 24.745267] exit_signals+0x25/0x220
[ 24.745267] do_exit+0x89/0xb80
[ 24.745267] ? kthread+0xf2/0x110
[ 24.745267] ? drain_workqueue+0x170/0x170
[ 24.745267] rewind_stack_do_exit+0x11/0x13
next prev parent reply other threads:[~2019-01-16 20:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-16 6:38 linux-next: Tree for Jan 16 Stephen Rothwell
2019-01-16 17:00 ` linux-next: Tree for Jan 16 (PCI config warning?) Randy Dunlap
2019-01-16 17:23 ` Sinan Kaya
2019-01-16 18:06 ` Randy Dunlap
2019-01-16 20:35 ` Guenter Roeck [this message]
2019-01-17 8:49 ` linux-next: Tree for Jan 16 Ming Lei
2019-01-17 10:35 ` Ming Lei
2019-01-17 18:32 ` Guenter Roeck
2019-01-17 18:34 ` Jens Axboe
2019-01-17 21:35 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2023-01-16 4:17 Stephen Rothwell
2022-01-16 4:06 Stephen Rothwell
2020-01-16 9:17 Stephen Rothwell
2018-01-16 5:23 Stephen Rothwell
2017-01-16 4:21 Stephen Rothwell
2015-01-16 8:47 Stephen Rothwell
2014-01-16 6:56 Stephen Rothwell
2013-01-16 4:24 Stephen Rothwell
2012-01-16 2:57 Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116203547.GA788@roeck-us.net \
--to=linux@roeck-us.net \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=ming.lei@redhat.com \
--cc=osandov@fb.com \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).