linux-nvdimm.lists.01.org archive mirror
 help / color / mirror / Atom feed
From: Frederic Barrat <fbarrat@linux.ibm.com>
To: "Alastair D'Silva" <alastair@au1.ibm.com>, alastair@d-silva.org
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>,
	"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
	"Paul Mackerras" <paulus@samba.org>,
	"Michael Ellerman" <mpe@ellerman.id.au>,
	"Andrew Donnellan" <ajd@linux.ibm.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"Rob Herring" <robh@kernel.org>,
	"Anton Blanchard" <anton@ozlabs.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Mahesh Salgaonkar" <mahesh@linux.vnet.ibm.com>,
	"Madhavan Srinivasan" <maddy@linux.vnet.ibm.com>,
	"Cédric Le Goater" <clg@kaod.org>,
	"Anju T Sudhakar" <anju@linux.vnet.ibm.com>,
	"Hari Bathini" <hbathini@linux.ibm.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Greg Kurz" <groug@kaod.org>,
	"Nicholas Piggin" <npiggin@gmail.com>,
	"Masahiro Yamada" <yamada.masahiro@socionext.com>,
	"Alexey Kardashevskiy" <aik@ozlabs.ru>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 10/27] powerpc: Add driver for OpenCAPI Persistent Memory
Date: Fri, 28 Feb 2020 19:32:41 +0100	[thread overview]
Message-ID: <a7be257e-256c-2789-a144-c4417782e6c3@linux.ibm.com> (raw)
In-Reply-To: <20200221032720.33893-11-alastair@au1.ibm.com>



Le 21/02/2020 à 04:27, Alastair D'Silva a écrit :
> From: Alastair D'Silva <alastair@d-silva.org>
> 
> This driver exposes LPC memory on OpenCAPI pmem cards
> as an NVDIMM, allowing the existing nvram infrastructure
> to be used.
> 
> Namespace metadata is stored on the media itself, so
> scm_reserve_metadata() maps 1 section's worth of PMEM storage
> at the start to hold this. The rest of the PMEM range is registered
> with libnvdimm as an nvdimm. scm_ndctl_config_read/write/size() provide
> callbacks to libnvdimm to access the metadata.
> 
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
>   arch/powerpc/platforms/powernv/Kconfig        |   3 +
>   arch/powerpc/platforms/powernv/Makefile       |   1 +
>   arch/powerpc/platforms/powernv/pmem/Kconfig   |  15 +
>   arch/powerpc/platforms/powernv/pmem/Makefile  |   7 +
>   arch/powerpc/platforms/powernv/pmem/ocxl.c    | 473 ++++++++++++++++++
>   .../platforms/powernv/pmem/ocxl_internal.h    |  28 ++
>   6 files changed, 527 insertions(+)
>   create mode 100644 arch/powerpc/platforms/powernv/pmem/Kconfig
>   create mode 100644 arch/powerpc/platforms/powernv/pmem/Makefile
>   create mode 100644 arch/powerpc/platforms/powernv/pmem/ocxl.c
>   create mode 100644 arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
> 
> diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
> index 938803eab0ad..fc8976af0e52 100644
> --- a/arch/powerpc/platforms/powernv/Kconfig
> +++ b/arch/powerpc/platforms/powernv/Kconfig
> @@ -50,3 +50,6 @@ config PPC_VAS
>   config SCOM_DEBUGFS
>   	bool "Expose SCOM controllers via debugfs"
>   	depends on DEBUG_FS
> +
> +source "arch/powerpc/platforms/powernv/pmem/Kconfig"
> +
> diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
> index c0f8120045c3..0bbd72988b6f 100644
> --- a/arch/powerpc/platforms/powernv/Makefile
> +++ b/arch/powerpc/platforms/powernv/Makefile
> @@ -21,3 +21,4 @@ obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o
>   obj-$(CONFIG_OCXL_BASE)	+= ocxl.o
>   obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o
>   obj-$(CONFIG_PPC_SECURE_BOOT) += opal-secvar.o
> +obj-$(CONFIG_LIBNVDIMM) += pmem/
> diff --git a/arch/powerpc/platforms/powernv/pmem/Kconfig b/arch/powerpc/platforms/powernv/pmem/Kconfig
> new file mode 100644
> index 000000000000..c5d927520920
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/pmem/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +if LIBNVDIMM
> +
> +config OCXL_PMEM
> +	tristate "OpenCAPI Persistent Memory"
> +	depends on LIBNVDIMM && PPC_POWERNV && PCI && EEH && ZONE_DEVICE && OCXL
> +	help
> +	  Exposes devices that implement the OpenCAPI Storage Class Memory
> +	  specification as persistent memory regions. You may also want
> +	  DEV_DAX, DEV_DAX_PMEM & FS_DAX if you plan on using DAX devices
> +	  stacked on top of this driver.
> +
> +	  Select N if unsure.
> +
> +endif
> diff --git a/arch/powerpc/platforms/powernv/pmem/Makefile b/arch/powerpc/platforms/powernv/pmem/Makefile
> new file mode 100644
> index 000000000000..1c55c4193175
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/pmem/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +ccflags-$(CONFIG_PPC_WERROR)	+= -Werror
> +
> +obj-$(CONFIG_OCXL_PMEM) += ocxlpmem.o
> +
> +ocxlpmem-y := ocxl.o
> diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl.c b/arch/powerpc/platforms/powernv/pmem/ocxl.c
> new file mode 100644
> index 000000000000..3c4eeb5dcc0f
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/pmem/ocxl.c
> @@ -0,0 +1,473 @@
> +// SPDX-License-Id
> +// Copyright 2019 IBM Corp.
> +
> +/*
> + * A driver for OpenCAPI devices that implement the Storage Class
> + * Memory specification.
> + */
> +
> +#include <linux/module.h>
> +#include <misc/ocxl.h>
> +#include <linux/ndctl.h>
> +#include <linux/mm_types.h>
> +#include <linux/memory_hotplug.h>
> +#include "ocxl_internal.h"
> +
> +
> +static const struct pci_device_id ocxlpmem_pci_tbl[] = {
> +	{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0625), },
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(pci, ocxlpmem_pci_tbl);
> +
> +#define NUM_MINORS 256 // Total to reserve
> +
> +static dev_t ocxlpmem_dev;
> +static struct class *ocxlpmem_class;
> +static struct mutex minors_idr_lock;
> +static struct idr minors_idr;
> +
> +/**
> + * ndctl_config_write() - Handle a ND_CMD_SET_CONFIG_DATA command from ndctl
> + * @ocxlpmem: the device metadata
> + * @command: the incoming data to write
> + * Return: 0 on success, negative on failure
> + */
> +static int ndctl_config_write(struct ocxlpmem *ocxlpmem,
> +			      struct nd_cmd_set_config_hdr *command)
> +{
> +	if (command->in_offset + command->in_length > LABEL_AREA_SIZE)
> +		return -EINVAL;
> +
> +	memcpy_flushcache(ocxlpmem->metadata_addr + command->in_offset, command->in_buf,
> +			  command->in_length);
> +
> +	return 0;
> +}
> +
> +/**
> + * ndctl_config_read() - Handle a ND_CMD_GET_CONFIG_DATA command from ndctl
> + * @ocxlpmem: the device metadata
> + * @command: the read request
> + * Return: 0 on success, negative on failure
> + */
> +static int ndctl_config_read(struct ocxlpmem *ocxlpmem,
> +			     struct nd_cmd_get_config_data_hdr *command)
> +{
> +	if (command->in_offset + command->in_length > LABEL_AREA_SIZE)
> +		return -EINVAL;
> +
> +	memcpy_mcsafe(command->out_buf, ocxlpmem->metadata_addr + command->in_offset,
> +		      command->in_length);
> +
> +	return 0;
> +}
> +
> +/**
> + * ndctl_config_size() - Handle a ND_CMD_GET_CONFIG_SIZE command from ndctl
> + * @command: the read request
> + * Return: 0 on success, negative on failure
> + */
> +static int ndctl_config_size(struct nd_cmd_get_config_size *command)
> +{
> +	command->status = 0;
> +	command->config_size = LABEL_AREA_SIZE;
> +	command->max_xfer = PAGE_SIZE;
> +
> +	return 0;
> +}
> +
> +static int ndctl(struct nvdimm_bus_descriptor *nd_desc,
> +		 struct nvdimm *nvdimm,
> +		 unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
> +{
> +	struct ocxlpmem *ocxlpmem = container_of(nd_desc, struct ocxlpmem, bus_desc);
> +
> +	switch (cmd) {
> +	case ND_CMD_GET_CONFIG_SIZE:
> +		*cmd_rc = ndctl_config_size(buf);
> +		return 0;
> +
> +	case ND_CMD_GET_CONFIG_DATA:
> +		*cmd_rc = ndctl_config_read(ocxlpmem, buf);
> +		return 0;
> +
> +	case ND_CMD_SET_CONFIG_DATA:
> +		*cmd_rc = ndctl_config_write(ocxlpmem, buf);
> +		return 0;
> +
> +	default:
> +		return -ENOTTY;
> +	}
> +}
> +
> +/**
> + * reserve_metadata() - Reserve space for nvdimm metadata
> + * @ocxlpmem: the device metadata
> + * @lpc_mem: The resource representing the LPC memory of the OpenCAPI device
> + */
> +static int reserve_metadata(struct ocxlpmem *ocxlpmem,
> +			    struct resource *lpc_mem)
> +{
> +	ocxlpmem->metadata_addr = devm_memremap(&ocxlpmem->dev, lpc_mem->start,
> +						LABEL_AREA_SIZE, MEMREMAP_WB);
> +	if (IS_ERR(ocxlpmem->metadata_addr))
> +		return PTR_ERR(ocxlpmem->metadata_addr);
> +
> +	return 0;
> +}
> +
> +/**
> + * register_lpc_mem() - Discover persistent memory on a device and register it with the NVDIMM subsystem
> + * @ocxlpmem: the device metadata
> + * Return: 0 on success
> + */
> +static int register_lpc_mem(struct ocxlpmem *ocxlpmem)
> +{
> +	struct nd_region_desc region_desc;
> +	struct nd_mapping_desc nd_mapping_desc;
> +	struct resource *lpc_mem;
> +	const struct ocxl_afu_config *config;
> +	const struct ocxl_fn_config *fn_config;
> +	int rc;
> +	unsigned long nvdimm_cmd_mask = 0;
> +	unsigned long nvdimm_flags = 0;
> +	int target_node;
> +	char serial[16+1];
> +
> +	// Set up the reserved metadata area
> +	rc = ocxl_afu_map_lpc_mem(ocxlpmem->ocxl_afu);
> +	if (rc < 0)
> +		return rc;
> +
> +	lpc_mem = ocxl_afu_lpc_mem(ocxlpmem->ocxl_afu);
> +	if (lpc_mem == NULL || lpc_mem->start == 0)
> +		return -EINVAL;
> +
> +	config = ocxl_afu_config(ocxlpmem->ocxl_afu);
> +	fn_config = ocxl_function_config(ocxlpmem->ocxl_fn);
> +
> +	rc = reserve_metadata(ocxlpmem, lpc_mem);
> +	if (rc)
> +		return rc;
> +
> +	ocxlpmem->bus_desc.provider_name = "ocxl-pmem";
> +	ocxlpmem->bus_desc.ndctl = ndctl;
> +	ocxlpmem->bus_desc.module = THIS_MODULE;
> +
> +	ocxlpmem->nvdimm_bus = nvdimm_bus_register(&ocxlpmem->dev,
> +						   &ocxlpmem->bus_desc);
> +	if (!ocxlpmem->nvdimm_bus)
> +		return -EINVAL;
> +
> +	ocxlpmem->pmem_res.start = (u64)lpc_mem->start + LABEL_AREA_SIZE;
> +	ocxlpmem->pmem_res.end = (u64)lpc_mem->start + config->lpc_mem_size - 1;
> +	ocxlpmem->pmem_res.name = "OpenCAPI persistent memory";
> +
> +	set_bit(ND_CMD_GET_CONFIG_SIZE, &nvdimm_cmd_mask);
> +	set_bit(ND_CMD_GET_CONFIG_DATA, &nvdimm_cmd_mask);
> +	set_bit(ND_CMD_SET_CONFIG_DATA, &nvdimm_cmd_mask);
> +
> +	set_bit(NDD_ALIASING, &nvdimm_flags);
> +
> +	snprintf(serial, sizeof(serial), "%llx", fn_config->serial);
> +	nd_mapping_desc.nvdimm = nvdimm_create(ocxlpmem->nvdimm_bus, ocxlpmem,
> +				 NULL, nvdimm_flags, nvdimm_cmd_mask,
> +				 0, NULL);
> +	if (!nd_mapping_desc.nvdimm)
> +		return -ENOMEM;
> +
> +	if (nvdimm_bus_check_dimm_count(ocxlpmem->nvdimm_bus, 1))
> +		return -EINVAL;
> +
> +	nd_mapping_desc.start = ocxlpmem->pmem_res.start;
> +	nd_mapping_desc.size = resource_size(&ocxlpmem->pmem_res);
> +	nd_mapping_desc.position = 0;
> +
> +	ocxlpmem->nd_set.cookie1 = fn_config->serial + 1; // allow for empty serial
> +	ocxlpmem->nd_set.cookie2 = fn_config->serial + 1;
> +
> +	target_node = of_node_to_nid(ocxlpmem->pdev->dev.of_node);
> +
> +	memset(&region_desc, 0, sizeof(region_desc));
> +	region_desc.res = &ocxlpmem->pmem_res;
> +	region_desc.numa_node = NUMA_NO_NODE;
> +	region_desc.target_node = target_node;
> +	region_desc.num_mappings = 1;
> +	region_desc.mapping = &nd_mapping_desc;
> +	region_desc.nd_set = &ocxlpmem->nd_set;
> +
> +	set_bit(ND_REGION_PAGEMAP, &region_desc.flags);
> +	/*
> +	 * NB: libnvdimm copies the data from ndr_desc into it's own
> +	 * structures so passing a stack pointer is fine.
> +	 */
> +	ocxlpmem->nd_region = nvdimm_pmem_region_create(ocxlpmem->nvdimm_bus,
> +							&region_desc);
> +	if (!ocxlpmem->nd_region)
> +		return -EINVAL;
> +
> +	dev_info(&ocxlpmem->dev,
> +		 "Onlining %lluMB of persistent memory\n",
> +		 nd_mapping_desc.size / SZ_1M);
> +
> +	return 0;
> +}



There seems to be a lot of nvdimm-related operations which are done here 
and the undo part in free_ocxlpmem() is a lot shorter. Are we okay? Does 
the driver support being unloaded and reloaded, therefore reinitializing 
the same resources again?

   Fred




> +
> +/**
> + * allocate_minor() - Allocate a minor number to use for an OpenCAPI pmem device
> + * @ocxlpmem: the device metadata
> + * Return: the allocated minor number
> + */
> +static int allocate_minor(struct ocxlpmem *ocxlpmem)
> +{
> +	int minor;
> +
> +	mutex_lock(&minors_idr_lock);
> +	minor = idr_alloc(&minors_idr, ocxlpmem, 0, NUM_MINORS, GFP_KERNEL);
> +	mutex_unlock(&minors_idr_lock);
> +	return minor;
> +}
> +
> +static void free_minor(struct ocxlpmem *ocxlpmem)
> +{
> +	mutex_lock(&minors_idr_lock);
> +	idr_remove(&minors_idr, MINOR(ocxlpmem->dev.devt));
> +	mutex_unlock(&minors_idr_lock);
> +}
> +
> +/**
> + * free_ocxlpmem() - Free all members of an ocxlpmem struct
> + * @ocxlpmem: the device struct to clear
> + */
> +static void free_ocxlpmem(struct ocxlpmem *ocxlpmem)
> +{
> +	int rc;
> +
> +	if (ocxlpmem->nvdimm_bus)
> +		nvdimm_bus_unregister(ocxlpmem->nvdimm_bus);
> +
> +	free_minor(ocxlpmem);
> +
> +	if (ocxlpmem->metadata_addr)
> +		devm_memunmap(&ocxlpmem->dev, ocxlpmem->metadata_addr);
> +
> +	if (ocxlpmem->ocxl_context) {
> +		rc = ocxl_context_detach(ocxlpmem->ocxl_context);
> +		if (rc == -EBUSY)
> +			dev_warn(&ocxlpmem->dev, "Timeout detaching ocxl context\n");
> +		else
> +			ocxl_context_free(ocxlpmem->ocxl_context);
> +
> +	}
> +
> +	if (ocxlpmem->ocxl_afu)
> +		ocxl_afu_put(ocxlpmem->ocxl_afu);
> +
> +	if (ocxlpmem->ocxl_fn)
> +		ocxl_function_close(ocxlpmem->ocxl_fn);
> +
> +	kfree(ocxlpmem);
> +}
> +
> +/**
> + * free_ocxlpmem_dev() - Free an OpenCAPI persistent memory device
> + * @dev: The device struct
> + */
> +static void free_ocxlpmem_dev(struct device *dev)
> +{
> +	struct ocxlpmem *ocxlpmem = container_of(dev, struct ocxlpmem, dev);
> +
> +	free_ocxlpmem(ocxlpmem);
> +}
> +
> +/**
> + * ocxlpmem_register() - Register an OpenCAPI pmem device with the kernel
> + * @ocxlpmem: the device metadata
> + * Return: 0 on success, negative on failure
> + */
> +static int ocxlpmem_register(struct ocxlpmem *ocxlpmem)
> +{
> +	int rc;
> +	int minor = allocate_minor(ocxlpmem);
> +
> +	if (minor < 0)
> +		return minor;
> +
> +	ocxlpmem->dev.release = free_ocxlpmem_dev;
> +	rc = dev_set_name(&ocxlpmem->dev, "ocxlpmem%d", minor);
> +	if (rc < 0)
> +		return rc;
> +
> +	ocxlpmem->dev.devt = MKDEV(MAJOR(ocxlpmem_dev), minor);
> +	ocxlpmem->dev.class = ocxlpmem_class;
> +	ocxlpmem->dev.parent = &ocxlpmem->pdev->dev;
> +
> +	return device_register(&ocxlpmem->dev);
> +}
> +
> +/**
> + * ocxlpmem_remove() - Free an OpenCAPI persistent memory device
> + * @pdev: the PCI device information struct
> + */
> +static void ocxlpmem_remove(struct pci_dev *pdev)
> +{
> +	if (PCI_FUNC(pdev->devfn) == 0) {
> +		struct ocxlpmem_function0 *func0 = pci_get_drvdata(pdev);
> +
> +		if (func0) {
> +			ocxl_function_close(func0->ocxl_fn);
> +			func0->ocxl_fn = NULL;
> +		}
> +	} else {
> +		struct ocxlpmem *ocxlpmem = pci_get_drvdata(pdev);
> +
> +		if (ocxlpmem)
> +			device_unregister(&ocxlpmem->dev);
> +	}
> +}
> +
> +/**
> + * probe_function0() - Set up function 0 for an OpenCAPI persistent memory device
> + * This is important as it enables templates higher than 0 across all other functions,
> + * which in turn enables higher bandwidth accesses
> + * @pdev: the PCI device information struct
> + * Return: 0 on success, negative on failure
> + */
> +static int probe_function0(struct pci_dev *pdev)
> +{
> +	struct ocxlpmem_function0 *func0 = NULL;
> +	struct ocxl_fn *fn;
> +
> +	func0 = kzalloc(sizeof(*func0), GFP_KERNEL);
> +	if (!func0)
> +		return -ENOMEM;
> +
> +	func0->pdev = pdev;
> +	fn = ocxl_function_open(pdev);
> +	if (IS_ERR(fn)) {
> +		kfree(func0);
> +		dev_err(&pdev->dev, "failed to open OCXL function\n");
> +		return PTR_ERR(fn);
> +	}
> +	func0->ocxl_fn = fn;
> +
> +	pci_set_drvdata(pdev, func0);
> +
> +	return 0;
> +}
> +
> +/**
> + * probe() - Init an OpenCAPI persistent memory device
> + * @pdev: the PCI device information struct
> + * @ent: The entry from ocxlpmem_pci_tbl
> + * Return: 0 on success, negative on failure
> + */
> +static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> +{
> +	struct ocxlpmem *ocxlpmem;
> +	int rc;
> +
> +	if (PCI_FUNC(pdev->devfn) == 0)
> +		return probe_function0(pdev);
> +	else if (PCI_FUNC(pdev->devfn) != 1)
> +		return 0;
> +
> +	ocxlpmem = kzalloc(sizeof(*ocxlpmem), GFP_KERNEL);
> +	if (!ocxlpmem) {
> +		dev_err(&pdev->dev, "Could not allocate OpenCAPI persistent memory metadata\n");
> +		rc = -ENOMEM;
> +		goto err;
> +	}
> +	ocxlpmem->pdev = pdev;
> +
> +	pci_set_drvdata(pdev, ocxlpmem);
> +
> +	ocxlpmem->ocxl_fn = ocxl_function_open(pdev);
> +	if (IS_ERR(ocxlpmem->ocxl_fn)) {
> +		kfree(ocxlpmem);
> +		pci_set_drvdata(pdev, NULL);
> +		dev_err(&pdev->dev, "failed to open OCXL function\n");
> +		rc = PTR_ERR(ocxlpmem->ocxl_fn);
> +		goto err;
> +	}
> +
> +	ocxlpmem->ocxl_afu = ocxl_function_fetch_afu(ocxlpmem->ocxl_fn, 0);
> +	if (ocxlpmem->ocxl_afu == NULL) {
> +		dev_err(&pdev->dev, "Could not get OCXL AFU from function\n");
> +		rc = -ENXIO;
> +		goto err;
> +	}
> +
> +	ocxl_afu_get(ocxlpmem->ocxl_afu);
> +
> +	// Resources allocated below here are cleaned up in the release handler
> +
> +	rc = ocxlpmem_register(ocxlpmem);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Could not register OpenCAPI persistent memory device with the kernel\n");
> +		goto err;
> +	}
> +
> +	rc = ocxl_context_alloc(&ocxlpmem->ocxl_context, ocxlpmem->ocxl_afu, NULL);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Could not allocate OCXL context\n");
> +		goto err;
> +	}
> +
> +	rc = ocxl_context_attach(ocxlpmem->ocxl_context, 0, NULL);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Could not attach ocxl context\n");
> +		goto err;
> +	}
> +
> +	rc = register_lpc_mem(ocxlpmem);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Could not register OpenCAPI persistent memory with libnvdimm\n");
> +		goto err;
> +	}
> +
> +	return 0;
> +
> +err:
> +	/*
> +	 * Further cleanup is done in the release handler via free_ocxlpmem()
> +	 * This allows us to keep the character device live to handle IOCTLs to
> +	 * investigate issues if the card has an error
> +	 */
> +
> +	dev_err(&pdev->dev,
> +		"Error detected, will not register OpenCAPI persistent memory\n");
> +	return rc;
> +}
> +
> +static struct pci_driver pci_driver = {
> +	.name = "ocxl-pmem",
> +	.id_table = ocxlpmem_pci_tbl,
> +	.probe = probe,
> +	.remove = ocxlpmem_remove,
> +	.shutdown = ocxlpmem_remove,
> +};
> +
> +static int __init ocxlpmem_init(void)
> +{
> +	int rc = 0;
> +
> +	rc = pci_register_driver(&pci_driver);
> +	if (rc)
> +		return rc;
> +
> +	return 0;
> +}
> +
> +static void ocxlpmem_exit(void)
> +{
> +	pci_unregister_driver(&pci_driver);
> +}
> +
> +module_init(ocxlpmem_init);
> +module_exit(ocxlpmem_exit);
> +
> +MODULE_DESCRIPTION("OpenCAPI Persistent Memory");
> +MODULE_LICENSE("GPL");
> diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
> new file mode 100644
> index 000000000000..0faf3740e9b8
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright 2019 IBM Corp.
> +
> +#include <linux/pci.h>
> +#include <misc/ocxl.h>
> +#include <linux/libnvdimm.h>
> +#include <linux/mm.h>
> +
> +#define LABEL_AREA_SIZE	(1UL << PA_SECTION_SHIFT)
> +
> +struct ocxlpmem_function0 {
> +	struct pci_dev *pdev;
> +	struct ocxl_fn *ocxl_fn;
> +};
> +
> +struct ocxlpmem {
> +	struct device dev;
> +	struct pci_dev *pdev;
> +	struct ocxl_fn *ocxl_fn;
> +	struct nd_interleave_set nd_set;
> +	struct nvdimm_bus_descriptor bus_desc;
> +	struct nvdimm_bus *nvdimm_bus;
> +	struct ocxl_afu *ocxl_afu;
> +	struct ocxl_context *ocxl_context;
> +	void *metadata_addr;
> +	struct resource pmem_res;
> +	struct nd_region *nd_region;
> +};
> 
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

  parent reply	other threads:[~2020-02-28 18:32 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-21  3:26 [PATCH v3 00/27] Add support for OpenCAPI Persistent Memory devices Alastair D'Silva
2020-02-21  3:26 ` [PATCH v3 01/27] powerpc: Add OPAL calls for LPC memory alloc/release Alastair D'Silva
2020-02-24  5:49   ` Andrew Donnellan
2020-02-24  5:50     ` Alastair D'Silva
2020-02-21  3:26 ` [PATCH v3 02/27] mm/memory_hotplug: Allow check_hotplug_memory_addressable to be called from drivers Alastair D'Silva
2020-02-21  7:03   ` Andrew Donnellan
2020-02-21  3:26 ` [PATCH v3 03/27] powerpc: Map & release OpenCAPI LPC memory Alastair D'Silva
2020-02-24  2:51   ` Andrew Donnellan
2020-02-24  5:49     ` Andrew Donnellan
2020-02-25 10:02   ` Frederic Barrat
2020-02-26  0:19     ` Alastair D'Silva
2020-03-03  6:10   ` Andrew Donnellan
2020-03-04  5:33     ` Alastair D'Silva
2020-02-21  3:26 ` [PATCH v3 04/27] ocxl: Remove unnecessary externs Alastair D'Silva
2020-02-21  6:06   ` Andrew Donnellan
2020-02-25 13:23   ` Frederic Barrat
2020-02-26  8:14   ` Baoquan He
2020-02-26  8:26     ` Alastair D'Silva
2020-02-26  9:01       ` Greg Kurz
2020-02-26 14:15         ` 'Baoquan He'
2020-02-26 14:20           ` Greg Kurz
2020-02-26 14:54             ` 'Baoquan He'
2020-02-21  3:26 ` [PATCH v3 05/27] ocxl: Address kernel doc errors & warnings Alastair D'Silva
2020-02-24  2:11   ` Andrew Donnellan
2020-02-21  3:26 ` [PATCH v3 06/27] ocxl: Tally up the LPC memory on a link & allow it to be mapped Alastair D'Silva
2020-02-24  5:25   ` Andrew Donnellan
2020-02-24  5:36     ` Alastair D'Silva
2020-02-25 16:30   ` Frederic Barrat
2020-02-26  0:29     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 07/27] ocxl: Add functions to map/unmap LPC memory Alastair D'Silva
2020-02-24  6:02   ` Andrew Donnellan
2020-02-24  6:08     ` Alastair D'Silva
2020-02-25 17:01   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 08/27] ocxl: Emit a log message showing how much LPC memory was detected Alastair D'Silva
2020-02-24  6:06   ` Andrew Donnellan
2020-02-24  6:10     ` Alastair D'Silva
2020-02-24  6:13       ` Andrew Donnellan
2020-02-25 17:03   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 09/27] ocxl: Save the device serial number in ocxl_fn Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 10/27] powerpc: Add driver for OpenCAPI Persistent Memory Alastair D'Silva
2020-02-26  5:07   ` Andrew Donnellan
2020-02-26  5:49     ` Alastair D'Silva
2020-02-27 20:44   ` Frederic Barrat
2020-02-28  0:54     ` Alastair D'Silva
2020-02-28 18:32   ` Frederic Barrat [this message]
2020-02-21  3:27 ` [PATCH v3 11/27] powerpc: Enable the OpenCAPI Persistent Memory driver for powernv_defconfig Alastair D'Silva
2020-02-25  3:01   ` Andrew Donnellan
2020-02-21  3:27 ` [PATCH v3 12/27] powerpc/powernv/pmem: Add register addresses & status values to the header Alastair D'Silva
2020-02-27  5:08   ` Andrew Donnellan
2020-02-27  5:16     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 13/27] powerpc/powernv/pmem: Read the capability registers & wait for device ready Alastair D'Silva
2020-02-27  3:54   ` Andrew Donnellan
2020-02-27  3:58     ` Alastair D'Silva
2020-03-02 17:51   ` Frederic Barrat
2020-03-04  4:15     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 14/27] powerpc/powernv/pmem: Add support for Admin commands Alastair D'Silva
2020-02-27  8:22   ` Andrew Donnellan
2020-02-27  8:27     ` Andrew Donnellan
2020-02-27 23:54       ` Alastair D'Silva
2020-02-27 23:51     ` Alastair D'Silva
2020-02-27 17:01   ` Dan Williams
2020-02-27 23:57     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 15/27] powerpc/powernv/pmem: Add support for near storage commands Alastair D'Silva
2020-02-27  8:30   ` Andrew Donnellan
2020-02-27 23:56     ` Alastair D'Silva
2020-02-27 17:02   ` Dan Williams
2020-03-02 17:58   ` Frederic Barrat
2020-03-02 18:42     ` Dan Williams
2020-03-04  4:42       ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 16/27] powerpc/powernv/pmem: Register a character device for userspace to interact with Alastair D'Silva
2020-03-02  5:34   ` Andrew Donnellan
2020-03-02  6:05     ` Alastair D'Silva
2020-03-03  9:28   ` Frederic Barrat
2020-03-05  3:38     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 17/27] powerpc/powernv/pmem: Implement the Read Error Log command Alastair D'Silva
2020-03-03 10:36   ` Frederic Barrat
2020-03-05  4:31     ` Alastair D'Silva
2020-03-05  9:33       ` Frederic Barrat
2020-03-04  5:58   ` Andrew Donnellan
2020-02-21  3:27 ` [PATCH v3 18/27] powerpc/powernv/pmem: Add controller dump IOCTLs Alastair D'Silva
2020-03-03 18:04   ` Frederic Barrat
2020-03-05 23:37     ` Alastair D'Silva
2020-03-04  6:53   ` Andrew Donnellan
2020-03-06  3:34     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 19/27] powerpc/powernv/pmem: Add an IOCTL to report controller statistics Alastair D'Silva
2020-03-04  9:25   ` Frederic Barrat
2020-03-12  0:15     ` Alastair D'Silva
2020-03-05  0:46   ` Andrew Donnellan
2020-03-12  4:47     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 20/27] powerpc/powernv/pmem: Forward events to userspace Alastair D'Silva
2020-03-03  7:02   ` Andrew Donnellan
2020-03-04  5:48     ` Alastair D'Silva
2020-03-04 11:00   ` Frederic Barrat
2020-03-11  3:32     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 21/27] powerpc/powernv/pmem: Add an IOCTL to request controller health & perf data Alastair D'Silva
2020-02-28  6:12   ` Andrew Donnellan
2020-03-02  5:40     ` Alastair D'Silva
2020-03-04 11:06     ` Frederic Barrat
2020-03-11  3:38       ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 22/27] powerpc/powernv/pmem: Implement the heartbeat command Alastair D'Silva
2020-02-28  6:20   ` Andrew Donnellan
2020-03-04 14:25   ` Frederic Barrat
2020-02-21  3:27 ` [PATCH v3 23/27] powerpc/powernv/pmem: Add debug IOCTLs Alastair D'Silva
2020-03-04 15:21   ` Frederic Barrat
2020-03-12  4:24     ` Alastair D'Silva
2020-03-05  3:11   ` Andrew Donnellan
2020-03-12  4:58     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 24/27] powerpc/powernv/pmem: Expose SMART data via ndctl Alastair D'Silva
2020-03-04 15:40   ` Frederic Barrat
2020-03-05  3:36   ` Andrew Donnellan
2020-03-12 23:14     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 25/27] powerpc/powernv/pmem: Expose the serial number in sysfs Alastair D'Silva
2020-02-28  6:25   ` Andrew Donnellan
2020-02-28  7:15     ` Greg Kroah-Hartman
2020-03-01 23:42       ` Alastair D'Silva
2020-03-02  5:38         ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 26/27] powerpc/powernv/pmem: Expose the firmware version " Alastair D'Silva
2020-03-02  7:35   ` Andrew Donnellan
2020-03-04  4:11     ` Alastair D'Silva
2020-02-21  3:27 ` [PATCH v3 27/27] MAINTAINERS: Add myself & nvdimm/ocxl to ocxl Alastair D'Silva
2020-02-21  5:35   ` Andrew Donnellan
2020-02-21 16:21 ` [PATCH v3 00/27] Add support for OpenCAPI Persistent Memory devices Dan Williams
2020-02-21 16:24   ` Dan Williams
2020-02-24  4:34   ` Alastair D'Silva
2020-02-24  4:37     ` Matthew Wilcox
2020-02-24  4:42       ` Alastair D'Silva
2020-02-24  6:51         ` Oliver O'Halloran
2020-02-26  0:13           ` Alastair D'Silva
2020-02-26  0:32             ` Dan Williams
2020-02-26  0:35               ` Alastair D'Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a7be257e-256c-2789-a144-c4417782e6c3@linux.ibm.com \
    --to=fbarrat@linux.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=ajd@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=alastair@au1.ibm.com \
    --cc=alastair@d-silva.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=anju@linux.vnet.ibm.com \
    --cc=anton@ozlabs.org \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=clg@kaod.org \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=groug@kaod.org \
    --cc=hbathini@linux.ibm.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mahesh@linux.vnet.ibm.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=paulus@samba.org \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).