linux-nvdimm.lists.01.org archive mirror
 help / color / mirror / Atom feed
From: "Verma, Vishal L" <vishal.l.verma@intel.com>
To: "sbhat@linux.ibm.com" <sbhat@linux.ibm.com>,
	"linux-nvdimm@lists.01.org" <linux-nvdimm@lists.01.org>,
	"harish@linux.ibm.com" <harish@linux.ibm.com>,
	"Williams, Dan J" <dan.j.williams@intel.com>,
	"santosh@fossix.org" <santosh@fossix.org>,
	"vaibhav@linux.ibm.com" <vaibhav@linux.ibm.com>
Subject: Re: [ndctl PATCH v3 1/4] libndctl: test enablement for non-nfit devices
Date: Wed, 17 Mar 2021 22:08:36 +0000	[thread overview]
Message-ID: <a8113f63687873855f0b7a328747e5dbb467da3f.camel@intel.com> (raw)
In-Reply-To: <20210311074652.2783560-1-santosh@fossix.org>

On Thu, 2021-03-11 at 13:16 +0530, Santosh Sivaraj wrote:
> Unify adding dimms for papr and nfit families, this will help in adding

Minor nit, but it seems like the subject line and the first sentence in
the body should be swapped. The one-line description of what's happening
in this patch is "Unify adding dimms for papr and nfit families", and
the body can go into more detail about why - i.e. in preparation for
enabling tests on non-nfit devices.

> all attributes needed for the unit tests too. We don't fail adding a dimm
> if some of the dimm attributes are missing, so this will work fine on PAPR
> platforms where most dimm attributes are provided.

Does this mean 'most - but not all'? Might be a good clarification to
make here.

> 
> Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
> ---
>  ndctl/lib/libndctl.c | 103 ++++++++++++++++---------------------------
>  1 file changed, 38 insertions(+), 65 deletions(-)
> 
> v3:
> * Drop patch which skips SMART tests, smart test enablement will be posted
>   soon.
> 
> v2:
> * Patch 2: Fix a bug, I skip erroring out if PAPR family, but condition had
>   INTEL family instead. That change was there to test the same code on x86, but
>   accidently committed. Now have a environment variable to force test PAPR
>   family on x86.
> 
> * Patch 4: Remove stray code, artifact of refactoring in patch 1.
> 
> diff --git a/ndctl/lib/libndctl.c b/ndctl/lib/libndctl.c
> index 36fb6fe..26b9317 100644
> --- a/ndctl/lib/libndctl.c
> +++ b/ndctl/lib/libndctl.c
> @@ -1646,41 +1646,9 @@ static int ndctl_bind(struct ndctl_ctx *ctx, struct kmod_module *module,
>  static int ndctl_unbind(struct ndctl_ctx *ctx, const char *devpath);
>  static struct kmod_module *to_module(struct ndctl_ctx *ctx, const char *alias);
>  
> -static int add_papr_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
> -{
> -	int rc = -ENODEV;
> -	char buf[SYSFS_ATTR_SIZE];
> -	struct ndctl_ctx *ctx = dimm->bus->ctx;
> -	char *path = calloc(1, strlen(dimm_base) + 100);
> -	const char * const devname = ndctl_dimm_get_devname(dimm);
> -
> -	dbg(ctx, "%s: Probing of_pmem dimm at %s\n", devname, dimm_base);
> -
> -	if (!path)
> -		return -ENOMEM;
> -
> -	/* construct path to the papr compatible dimm flags file */
> -	sprintf(path, "%s/papr/flags", dimm_base);
> -
> -	if (ndctl_bus_is_papr_scm(dimm->bus) &&
> -	    sysfs_read_attr(ctx, path, buf) == 0) {
> -
> -		dbg(ctx, "%s: Adding papr-scm dimm flags:\"%s\"\n", devname, buf);
> -		dimm->cmd_family = NVDIMM_FAMILY_PAPR;
> -
> -		/* Parse dimm flags */
> -		parse_papr_flags(dimm, buf);
> -
> -		/* Allocate monitor mode fd */
> -		dimm->health_eventfd = open(path, O_RDONLY|O_CLOEXEC);
> -		rc = 0;
> -	}
> -
> -	free(path);
> -	return rc;
> -}
> -
> -static int add_nfit_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
> +static int populate_dimm_attributes(struct ndctl_dimm *dimm,
> +				    const char *dimm_base,
> +				    const char *bus_prefix)
>  {
>  	int i, rc = -1;
>  	char buf[SYSFS_ATTR_SIZE];
> @@ -1694,7 +1662,7 @@ static int add_nfit_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
>  	 * 'unique_id' may not be available on older kernels, so don't
>  	 * fail if the read fails.
>  	 */
> -	sprintf(path, "%s/nfit/id", dimm_base);
> +	sprintf(path, "%s/%s/id", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0) {
>  		unsigned int b[9];
> 
> @@ -1709,68 +1677,74 @@ static int add_nfit_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
>  		}
>  	}
> 
> -	sprintf(path, "%s/nfit/handle", dimm_base);
> +	sprintf(path, "%s/%s/handle", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) < 0)
>  		goto err_read;
>  	dimm->handle = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/phys_id", dimm_base);
> +	sprintf(path, "%s/%s/phys_id", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) < 0)
>  		goto err_read;
>  	dimm->phys_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/serial", dimm_base);
> +	sprintf(path, "%s/%s/serial", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->serial = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/vendor", dimm_base);
> +	sprintf(path, "%s/%s/vendor", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->vendor_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/device", dimm_base);
> +	sprintf(path, "%s/%s/device", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->device_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/rev_id", dimm_base);
> +	sprintf(path, "%s/%s/rev_id", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->revision_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/dirty_shutdown", dimm_base);
> +	sprintf(path, "%s/%s/dirty_shutdown", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->dirty_shutdown = strtoll(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/subsystem_vendor", dimm_base);
> +	sprintf(path, "%s/%s/subsystem_vendor", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->subsystem_vendor_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/subsystem_device", dimm_base);
> +	sprintf(path, "%s/%s/subsystem_device", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->subsystem_device_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/subsystem_rev_id", dimm_base);
> +	sprintf(path, "%s/%s/subsystem_rev_id", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->subsystem_revision_id = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/family", dimm_base);
> +	sprintf(path, "%s/%s/family", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->cmd_family = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/dsm_mask", dimm_base);
> +	sprintf(path, "%s/%s/dsm_mask", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->nfit_dsm_mask = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/format", dimm_base);
> +	sprintf(path, "%s/%s/format", dimm_base, bus_prefix);
>  	if (sysfs_read_attr(ctx, path, buf) == 0)
>  		dimm->format[0] = strtoul(buf, NULL, 0);
>  	for (i = 1; i < dimm->formats; i++) {
> -		sprintf(path, "%s/nfit/format%d", dimm_base, i);
> +		sprintf(path, "%s/%s/format%d", dimm_base, bus_prefix, i);
>  		if (sysfs_read_attr(ctx, path, buf) == 0)
>  			dimm->format[i] = strtoul(buf, NULL, 0);
>  	}
>  
> -	sprintf(path, "%s/nfit/flags", dimm_base);
> -	if (sysfs_read_attr(ctx, path, buf) == 0)
> -		parse_nfit_mem_flags(dimm, buf);
> +	sprintf(path, "%s/%s/flags", dimm_base, bus_prefix);
> +	if (sysfs_read_attr(ctx, path, buf) == 0) {
> +		if (ndctl_bus_has_nfit(dimm->bus))
> +			parse_nfit_mem_flags(dimm, buf);
> +		else if (ndctl_bus_is_papr_scm(dimm->bus)) {
> +			dimm->cmd_family = NVDIMM_FAMILY_PAPR;
> +			parse_papr_flags(dimm, buf);
> +		}
> +	}
>  
>  	dimm->health_eventfd = open(path, O_RDONLY|O_CLOEXEC);
>  	rc = 0;
> @@ -1792,7 +1766,8 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
>  	if (!path)
>  		return NULL;
>  
> -	sprintf(path, "%s/nfit/formats", dimm_base);
> +	sprintf(path, "%s/%s/formats", dimm_base,
> +		ndctl_bus_has_nfit(bus) ? "nfit" : "papr");
>  	if (sysfs_read_attr(ctx, path, buf) < 0)
>  		formats = 1;
>  	else
> @@ -1866,13 +1841,12 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
>  	else
>  		dimm->fwa_result = fwa_result_to_result(buf);
>  
> +	dimm->formats = formats;
>  	/* Check if the given dimm supports nfit */
>  	if (ndctl_bus_has_nfit(bus)) {
> -		dimm->formats = formats;
> -		rc = add_nfit_dimm(dimm, dimm_base);
> -	} else if (ndctl_bus_has_of_node(bus)) {
> -		rc = add_papr_dimm(dimm, dimm_base);
> -	}
> +		rc = populate_dimm_attributes(dimm, dimm_base, "nfit");
> +	} else if (ndctl_bus_has_of_node(bus))
> +		rc = populate_dimm_attributes(dimm, dimm_base, "papr");
>  
>  	if (rc == -ENODEV) {
>  		/* Unprobed dimm with no family */
> @@ -2531,13 +2505,12 @@ static void *add_region(void *parent, int id, const char *region_base)
>  		goto err_read;
>  	region->num_mappings = strtoul(buf, NULL, 0);
>  
> -	sprintf(path, "%s/nfit/range_index", region_base);
> -	if (ndctl_bus_has_nfit(bus)) {
> -		if (sysfs_read_attr(ctx, path, buf) < 0)
> -			goto err_read;
> -		region->range_index = strtoul(buf, NULL, 0);
> -	} else
> +	sprintf(path, "%s/%s/range_index", region_base,
> +		ndctl_bus_has_nfit(bus) ? "nfit": "papr");
> +	if (sysfs_read_attr(ctx, path, buf) < 0)
>  		region->range_index = -1;
> +	else
> +		region->range_index = strtoul(buf, NULL, 0);
>  
>  	sprintf(path, "%s/read_only", region_base);
>  	if (sysfs_read_attr(ctx, path, buf) < 0)


_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

  parent reply	other threads:[~2021-03-17 22:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-11  7:46 [ndctl PATCH v3 1/4] libndctl: test enablement for non-nfit devices Santosh Sivaraj
2021-03-11  7:46 ` [ndctl PATCH v3 2/4] test: Don't skip tests if nfit modules are missing Santosh Sivaraj
2021-03-17 22:14   ` Verma, Vishal L
2021-03-19  5:50     ` Santosh Sivaraj
2021-03-24 20:06       ` Verma, Vishal L
2021-03-25  6:08         ` Santosh Sivaraj
2021-03-11  7:46 ` [ndctl PATCH v3 3/4] papr: Add support to parse save_fail flag for dimm Santosh Sivaraj
2021-03-17 22:18   ` Verma, Vishal L
2021-03-11  7:46 ` [ndctl PATCH v3 4/4] Use page size as alignment value Santosh Sivaraj
2021-03-17 22:08 ` Verma, Vishal L [this message]
2021-03-19  5:54   ` [ndctl PATCH v3 1/4] libndctl: test enablement for non-nfit devices Santosh Sivaraj

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a8113f63687873855f0b7a328747e5dbb467da3f.camel@intel.com \
    --to=vishal.l.verma@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=harish@linux.ibm.com \
    --cc=linux-nvdimm@lists.01.org \
    --cc=santosh@fossix.org \
    --cc=sbhat@linux.ibm.com \
    --cc=vaibhav@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).