From: "Alexander A. Klimov" <grandmaster@al2klimov.de>
To: edubezval@gmail.com, j-keerthy@ti.com, rui.zhang@intel.com,
daniel.lezcano@linaro.org, amit.kucheria@verdurent.com,
linux-pm@vger.kernel.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Subject: [PATCH] thermal: ti-soc-thermal: Replace HTTP links with HTTPS ones
Date: Thu, 16 Jul 2020 21:08:39 +0200 [thread overview]
Message-ID: <20200716190839.63380-1-grandmaster@al2klimov.de> (raw)
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master
If there are any URLs to be removed completely or at least not just HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64
If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837
If you apply the patch, please let me know.
Sorry again to all maintainers who complained about subject lines.
Now I realized that you want an actually perfect prefixes,
not just subsystem ones.
I tried my best...
And yes, *I could* (at least half-)automate it.
Impossible is nothing! :)
drivers/thermal/ti-soc-thermal/dra752-bandgap.h | 2 +-
drivers/thermal/ti-soc-thermal/omap3-thermal-data.c | 2 +-
drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h | 2 +-
drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h | 2 +-
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
drivers/thermal/ti-soc-thermal/ti-bandgap.h | 2 +-
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
drivers/thermal/ti-soc-thermal/ti-thermal.h | 2 +-
8 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
index d1b5b699cf23..c3eae80b2ab5 100644
--- a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h
@@ -2,7 +2,7 @@
/*
* DRA752 bandgap registers, bitfields and temperature definitions
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
* Tero Kristo <t-kristo@ti.com>
diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
index 72e1ff270af7..80af315bae35 100644
--- a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -6,7 +6,7 @@
* Copyright (C) 2014 Pavel Machek <pavel@ucw.cz>
*
* Note
- * http://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
+ * https://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
* 3.1.1.186 MMC OCP Clock Not Gated When Thermal Sensor Is Used"
*
* Also TI says:
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
index a453ff8eb313..23352183dfe8 100644
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -2,7 +2,7 @@
/*
* OMAP4xxx bandgap registers, bitfields and temperature definitions
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
diff --git a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
index 3880e667ea96..c5a2e2abbe5f 100644
--- a/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h
@@ -2,7 +2,7 @@
/*
* OMAP5xxx bandgap registers, bitfields and temperature definitions
*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index ab19ceff6e2a..7bb7e9d12cda 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -2,7 +2,7 @@
/*
* TI Bandgap temperature sensor driver
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
* Author: J Keerthy <j-keerthy@ti.com>
* Author: Moiz Sonasath <m-sonasath@ti.com>
* Couple of fixes, DT and MFD adaptation:
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index fce4657e9486..457027d07f05 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -2,7 +2,7 @@
/*
* OMAP4 Bandgap temperature sensor driver
*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 85776db4bf34..9121d28325a8 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -2,7 +2,7 @@
/*
* OMAP thermal driver interface
*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h
index c388ecf31834..7fb1e56a8333 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal.h
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h
@@ -2,7 +2,7 @@
/*
* OMAP thermal definitions
*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
--
2.27.0
reply other threads:[~2020-07-16 19:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200716190839.63380-1-grandmaster@al2klimov.de \
--to=grandmaster@al2klimov.de \
--cc=amit.kucheria@verdurent.com \
--cc=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=j-keerthy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).