linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH] net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement
Date: Thu, 29 Oct 2020 21:09:10 +0200	[thread overview]
Message-ID: <20201029190910.30789-1-grygorii.strashko@ti.com> (raw)

The TI CPTS does not natively support PTPv1, only PTPv2. But, as it
happens, the CPTS can provide HW timestamp for PTPv1 Sync messages, because
CPTS HW parser looks for PTP messageType id in PTP message octet 0 which
value is 0 for PTPv1. As result, CPTS HW can detect Sync messages for PTPv1
and PTPv2 (Sync messageType = 0 for both), but it fails for any other PTPv1
messages (Delay_req/resp) and will return PTP messageType id 0 for them.

The commit e9523a5a32a1 ("net: ethernet: ti: cpsw: enable
HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") added PTPv1 hw timestamping
advertisement by mistake, only to make Linux Kernel "timestamping" utility
work, and this causes issues with only PTPv1 compatible HW/SW - Sync HW
timestamped, but Delay_req/resp are not.

Hence, fix it disabling PTPv1 hw timestamping advertisement, so only PTPv1
compatible HW/SW can properly roll back to SW timestamping.

Fixes: e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/net/ethernet/ti/cpsw_ethtool.c | 1 -
 drivers/net/ethernet/ti/cpsw_priv.c    | 5 +----
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c
index 4d02c5135611..4619c3a950b0 100644
--- a/drivers/net/ethernet/ti/cpsw_ethtool.c
+++ b/drivers/net/ethernet/ti/cpsw_ethtool.c
@@ -728,7 +728,6 @@ int cpsw_get_ts_info(struct net_device *ndev, struct ethtool_ts_info *info)
 		(1 << HWTSTAMP_TX_ON);
 	info->rx_filters =
 		(1 << HWTSTAMP_FILTER_NONE) |
-		(1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
 		(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
 	return 0;
 }
diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c
index 51cc29f39038..31c5e36ff706 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.c
+++ b/drivers/net/ethernet/ti/cpsw_priv.c
@@ -639,13 +639,10 @@ static int cpsw_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
 		break;
 	case HWTSTAMP_FILTER_ALL:
 	case HWTSTAMP_FILTER_NTP_ALL:
-		return -ERANGE;
 	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
 	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
 	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
-		priv->rx_ts_enabled = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
-		cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
-		break;
+		return -ERANGE;
 	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
 	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
-- 
2.17.1


             reply	other threads:[~2020-10-29 19:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-29 19:09 Grygorii Strashko [this message]
2020-10-31 18:40 ` [PATCH] net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement Jakub Kicinski
2020-11-01  2:02   ` Richard Cochran
2020-11-02 22:20     ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201029190910.30789-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).