From: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>, bhelgaas@google.com
Cc: mika.westerberg@linux.intel.com, koba.ko@canonical.com,
baolu.lu@linux.intel.com, Russell Currey <ruscur@russell.cc>,
Oliver O'Halloran <oohall@gmail.com>,
linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state
Date: Wed, 30 Mar 2022 12:40:32 -0700 [thread overview]
Message-ID: <009c9c14-7669-9750-a787-1d220414423e@linux.intel.com> (raw)
In-Reply-To: <20220329083130.817316-1-kai.heng.feng@canonical.com>
On 3/29/22 1:31 AM, Kai-Heng Feng wrote:
> On some Intel AlderLake platforms, Thunderbolt entering D3cold can cause
> some errors reported by AER:
> [ 30.100211] pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
> [ 30.100251] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> [ 30.100256] pcieport 0000:00:1d.0: device [8086:7ab0] error status/mask=00100000/00004000
> [ 30.100262] pcieport 0000:00:1d.0: [20] UnsupReq (First)
> [ 30.100267] pcieport 0000:00:1d.0: AER: TLP Header: 34000000 08000052 00000000 00000000
> [ 30.100372] thunderbolt 0000:0a:00.0: AER: can't recover (no error_detected callback)
> [ 30.100401] xhci_hcd 0000:3e:00.0: AER: can't recover (no error_detected callback)
> [ 30.100427] pcieport 0000:00:1d.0: AER: device recovery failed
Include details about in which platform you have seen it and whether
this is a generic power issue?
>
> So disable AER service to avoid the noises from turning power rails
> on/off when the device is in low power states (D3hot and D3cold), as
> PCIe spec "5.2 Link State Power Management" states that TLP and DLLP
Also include PCIe specification version number.
> transmission is disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold
> with aux power) and L3 (D3cold).
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215453
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v3:
> - Remove reference to ACS.
> - Wording change.
>
> v2:
> - Wording change.
>
> drivers/pci/pcie/aer.c | 31 +++++++++++++++++++++++++------
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 9fa1f97e5b270..e4e9d4a3098d7 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1367,6 +1367,22 @@ static int aer_probe(struct pcie_device *dev)
> return 0;
> }
>
> +static int aer_suspend(struct pcie_device *dev)
> +{
> + struct aer_rpc *rpc = get_service_data(dev);
> +
> + aer_disable_rootport(rpc);
> + return 0;
> +}
> +
> +static int aer_resume(struct pcie_device *dev)
> +{
> + struct aer_rpc *rpc = get_service_data(dev);
> +
> + aer_enable_rootport(rpc);
> + return 0;
> +}
> +
> /**
> * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
> * @dev: pointer to Root Port, RCEC, or RCiEP
> @@ -1433,12 +1449,15 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
> }
>
> static struct pcie_port_service_driver aerdriver = {
> - .name = "aer",
> - .port_type = PCIE_ANY_PORT,
> - .service = PCIE_PORT_SERVICE_AER,
> -
> - .probe = aer_probe,
> - .remove = aer_remove,
> + .name = "aer",
> + .port_type = PCIE_ANY_PORT,
> + .service = PCIE_PORT_SERVICE_AER,
> + .probe = aer_probe,
> + .suspend = aer_suspend,
> + .resume = aer_resume,
> + .runtime_suspend = aer_suspend,
> + .runtime_resume = aer_resume,
> + .remove = aer_remove,
> };
>
> /**
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
next prev parent reply other threads:[~2022-03-30 19:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-29 8:31 [PATCH v3 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state Kai-Heng Feng
2022-03-29 8:31 ` [PATCH v3 2/2] PCI/DPC: Disable DPC " Kai-Heng Feng
2022-03-30 19:40 ` Sathyanarayanan Kuppuswamy [this message]
2022-04-08 11:26 ` [PATCH v3 1/2] PCI/AER: Disable AER " Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=009c9c14-7669-9750-a787-1d220414423e@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=kai.heng.feng@canonical.com \
--cc=koba.ko@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mika.westerberg@linux.intel.com \
--cc=oohall@gmail.com \
--cc=ruscur@russell.cc \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).