From: Lucas Stach <l.stach@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>, linux-pci@vger.kernel.org
Cc: bhelgaas@google.com, Fabio Estevam <fabio.estevam@nxp.com>,
cphealy@gmail.com, Leonard Crestez <leonard.crestez@nxp.com>,
"A.s. Dong" <aisheng.dong@nxp.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 3/3] PCI: imx: Add support for i.MX8MQ
Date: Thu, 06 Dec 2018 11:23:48 +0100 [thread overview]
Message-ID: <1544091828.3709.55.camel@pengutronix.de> (raw)
In-Reply-To: <20181206073545.10967-4-andrew.smirnov@gmail.com>
Am Mittwoch, den 05.12.2018, 23:35 -0800 schrieb Andrey Smirnov:
> Add code needed to support i.MX8MQ variant.
>
> Cc: bhelgaas@google.com
> > Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: cphealy@gmail.com
> Cc: l.stach@pengutronix.de
> > Cc: Leonard Crestez <leonard.crestez@nxp.com>
> > Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> > Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> > Cc: Mark Rutland <mark.rutland@arm.com>
> > Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> .../bindings/pci/fsl,imx6q-pcie.txt | 6 +-
> drivers/pci/controller/dwc/Kconfig | 2 +-
> drivers/pci/controller/dwc/pci-imx6.c | 85 +++++++++++++++++--
> 3 files changed, 86 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index f37494d5a7be..40b46d11e7e7 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -9,6 +9,7 @@ Required properties:
> > - "fsl,imx6sx-pcie",
> > - "fsl,imx6qp-pcie"
> > - "fsl,imx7d-pcie"
> > + - "fsl,imx8mq-pcie"
> - reg: base address and length of the PCIe controller
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
> @@ -43,7 +44,7 @@ Additional required properties for imx6sx-pcie:
> > - "pcie_inbound_axi"
> - power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain
>
> -Additional required properties for imx7d-pcie:
> +Additional required properties for imx7d-pcie and imx8mq-pcie:
> - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
> - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
> IP block
> @@ -52,6 +53,9 @@ Additional required properties for imx7d-pcie:
> > - "apps"
> > - "turnoff"
>
> +Additional required properties for imx8mq-pcie:
> +- fsl,controller-id: Logical ID of a given PCIE controller. PCIE1 is 0, PCIE2 is 1;
> +
> Example:
>
> > pcie@01000000 {
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 91b0194240a5..2b139acccf32 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -90,7 +90,7 @@ config PCI_EXYNOS
>
> config PCI_IMX6
> > bool "Freescale i.MX6 PCIe controller"
> > - depends on SOC_IMX6Q || (ARM && COMPILE_TEST)
> > + depends on SOC_IMX8MQ || SOC_IMX6Q || (ARM && COMPILE_TEST)
> > depends on PCI_MSI_IRQ_DOMAIN
> > select PCIE_DW_HOST
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 3c3002861d25..326f71698ac2 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -8,6 +8,7 @@
> > * Author: Sean Cross <xobs@kosagi.com>
> */
>
> +#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/gpio.h>
> @@ -30,6 +31,11 @@
>
> #include "pcie-designware.h"
>
> > +#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
> > +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
> > +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
> > +#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
> +
> > #define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
>
> enum imx6_pcie_variants {
> @@ -37,6 +43,7 @@ enum imx6_pcie_variants {
> > IMX6SX,
> > IMX6QP,
> > IMX7D,
> > + IMX8MQ,
> };
>
> struct imx6_pcie {
> @@ -48,6 +55,7 @@ struct imx6_pcie {
> > > struct clk *pcie_inbound_axi;
> > > struct clk *pcie;
> > > struct regmap *iomuxc_gpr;
> > > + u32 controller_id;
> > > struct reset_control *pciephy_reset;
> > > struct reset_control *apps_reset;
> > > struct reset_control *turnoff_reset;
> @@ -245,7 +253,8 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
> {
> > u32 tmp;
>
> > - if (imx6_pcie->variant == IMX7D)
> > + if (imx6_pcie->variant == IMX7D ||
> > + imx6_pcie->variant == IMX8MQ)
> > return;
>
> > pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
> @@ -261,6 +270,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
> > pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
> }
>
> +#ifdef CONFIG_ARM
> /* Added for PCI abort handling */
> static int imx6q_pcie_abort_handler(unsigned long addr,
> > unsigned int fsr, struct pt_regs *regs)
> @@ -294,6 +304,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
>
> > return 1;
> }
> +#endif
>
> static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> {
> @@ -301,6 +312,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
>
> > switch (imx6_pcie->variant) {
> > case IMX7D:
> > + case IMX8MQ: /* FALLTHROUGH */
> > reset_control_assert(imx6_pcie->pciephy_reset);
> > reset_control_assert(imx6_pcie->apps_reset);
> > break;
> @@ -339,6 +351,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> {
> > struct dw_pcie *pci = imx6_pcie->pci;
> > struct device *dev = pci->dev;
> > + unsigned int offset;
> > int ret = 0;
>
> > switch (imx6_pcie->variant) {
> @@ -369,6 +382,29 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> > break;
> > case IMX7D:
> > break;
> > + case IMX8MQ:
> > + switch (imx6_pcie->controller_id) {
> > + case 0:
> > + offset = IOMUXC_GPR14;
> > + break;
> > + case 1:
> > + offset = IOMUXC_GPR16;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> +
> > + /*
> > + * Set the over ride low and enabled
> > + * make sure that REF_CLK is turned on.
> > + */
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
> > + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
> > + 0);
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
> > + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
> > + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
> > + break;
> > }
>
> > return ret;
> @@ -445,6 +481,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> > }
>
> > switch (imx6_pcie->variant) {
> > + case IMX8MQ:
> > + reset_control_deassert(imx6_pcie->pciephy_reset);
> > + break;
> > case IMX7D:
> > reset_control_deassert(imx6_pcie->pciephy_reset);
> > imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
> @@ -482,7 +521,34 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>
> static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> {
> > + unsigned int mask, val, offset;
> +
> > + mask = IMX6Q_GPR12_DEVICE_TYPE;
> > + val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT);
> +
> > switch (imx6_pcie->variant) {
> > + case IMX8MQ:
> > + switch (imx6_pcie->controller_id) {
> > + case 0:
> > + offset = IOMUXC_GPR14;
> > + break;
> > + case 1:
> > + offset = IOMUXC_GPR16;
> > + mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> > + val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > + PCI_EXP_TYPE_ROOT_PORT);
> > + break;
> > + default:
> > + return;
> > + }
> > + /*
> > + * TODO: Currently this code assumes external
> > + * oscillator is being used
> > + */
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
> > + IMX8MQ_GPR_PCIE_REF_USE_PAD,
> > + IMX8MQ_GPR_PCIE_REF_USE_PAD);
> > + break;
> > case IMX7D:
> > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
> @@ -518,8 +584,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> > break;
> > }
>
> > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > - IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> }
>
> static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
> @@ -528,7 +593,8 @@ static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
> > int mult, div;
> > u32 val;
>
> > - if (imx6_pcie->variant == IMX7D)
> > + if (imx6_pcie->variant == IMX7D ||
> > + imx6_pcie->variant == IMX8MQ)
> > return 0;
>
> > switch (phy_rate) {
> @@ -616,6 +682,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
> > IMX6Q_GPR12_PCIE_CTL_2);
> > break;
> > case IMX7D:
> > > + case IMX8MQ: /* FALLTHROUGH */
> > reset_control_deassert(imx6_pcie->apps_reset);
> > break;
> > }
> @@ -870,6 +937,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> > imx6_pcie->variant =
> > (enum imx6_pcie_variants)of_device_get_match_data(dev);
>
> > + if (of_property_read_u32(node, "fsl,controller-id",
> > + &imx6_pcie->controller_id))
> > + imx6_pcie->controller_id = 0;
> +
> > dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
> > if (IS_ERR(pci->dbi_base))
> @@ -921,7 +992,8 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> > return PTR_ERR(imx6_pcie->pcie_inbound_axi);
> > }
> > break;
> > - case IMX7D:
> > + case IMX8MQ:
> > > + case IMX7D: /* FALLTHROUGH */
> > imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
> > "pciephy");
> > if (IS_ERR(imx6_pcie->pciephy_reset)) {
> @@ -1011,6 +1083,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> > { .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
> > { .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
> > { .compatible = "fsl,imx7d-pcie", .data = (void *)IMX7D, },
> > + { .compatible = "fsl,imx8mq-pcie", .data = (void *)IMX8MQ, } ,
> > {},
> };
>
> @@ -1027,6 +1100,7 @@ static struct platform_driver imx6_pcie_driver = {
>
> static int __init imx6_pcie_init(void)
> {
> +#ifdef CONFIG_ARM
> > /*
> > * Since probe() can be deferred we need to make sure that
> > * hook_fault_code is not called after __init memory is freed
> @@ -1036,6 +1110,7 @@ static int __init imx6_pcie_init(void)
> > */
> > hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
> > "external abort on non-linefetch");
> +#endif
>
> > return platform_driver_register(&imx6_pcie_driver);
> }
next prev parent reply other threads:[~2018-12-06 10:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-06 7:35 [PATCH v2 0/3] PCIE support for i.MX8MQ Andrey Smirnov
2018-12-06 7:35 ` [PATCH v2 1/3] PCI: imx: No-op imx6_setup_phy_mpll() on i.MX7D Andrey Smirnov
2018-12-06 9:41 ` Lucas Stach
2018-12-06 7:35 ` [PATCH v2 2/3] PCI: imx: No-op imx6_pcie_reset_phy() " Andrey Smirnov
2018-12-06 9:41 ` Lucas Stach
2018-12-06 7:35 ` [PATCH v2 3/3] PCI: imx: Add support for i.MX8MQ Andrey Smirnov
2018-12-06 10:23 ` Lucas Stach [this message]
2018-12-14 20:30 ` Bjorn Helgaas
2018-12-14 20:55 ` Gustavo A. R. Silva
2018-12-15 5:22 ` Andrey Smirnov
2018-12-06 12:15 ` [PATCH v2 0/3] PCIE " Lorenzo Pieralisi
2018-12-07 2:44 ` Andrey Smirnov
2018-12-14 20:38 ` Bjorn Helgaas
2018-12-15 5:25 ` Andrey Smirnov
2018-12-17 10:12 ` Lucas Stach
2018-12-17 10:26 ` Lorenzo Pieralisi
2018-12-17 11:11 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544091828.3709.55.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=aisheng.dong@nxp.com \
--cc=andrew.smirnov@gmail.com \
--cc=bhelgaas@google.com \
--cc=cphealy@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=hongxing.zhu@nxp.com \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).