From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com,
lorenzo.pieralisi@arm.com, marcel.ziswiler@toradex.com,
tharvey@gateworks.com, kishon@ti.com, vkoul@kernel.org,
robh@kernel.org, galak@kernel.crashing.org, shawnguo@kernel.org
Cc: hongxing.zhu@nxp.com, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: [PATCH v7 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm evk board
Date: Thu, 2 Dec 2021 16:02:37 +0800 [thread overview]
Message-ID: <1638432158-4119-8-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1638432158-4119-1-git-send-email-hongxing.zhu@nxp.com>
Add the PCIe support on iMX8MM EVK boards.
And set the default reference clock mode.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index e033d0257b5a..87a30daf0b3c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/usb/pd.h>
#include "imx8mm.dtsi"
@@ -30,6 +31,23 @@ status {
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_pcie0: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -289,6 +307,30 @@ pca6416: gpio@20 {
};
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ clocks = <&pcie0_refclk>;
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ vpcie-supply = <®_pcie0>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -406,6 +448,19 @@ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61
+ MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41
+ >;
+ };
+
+ pinctrl_pcie0_reg: pcie0reggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41
+ >;
+ };
+
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
--
2.25.1
next prev parent reply other threads:[~2021-12-02 8:30 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-02 8:02 [PATCH v7 0/8] Add the imx8m pcie phy driver and imx8mm pcie support Richard Zhu
2021-12-02 8:02 ` [PATCH v7 1/8] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy Richard Zhu
2021-12-14 14:33 ` Vinod Koul
2021-12-02 8:02 ` [PATCH v7 2/8] dt-bindings: phy: Add imx8 pcie phy driver support Richard Zhu
2021-12-14 14:33 ` Vinod Koul
2021-12-02 8:02 ` [PATCH v7 3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name properties Richard Zhu
2021-12-02 8:02 ` [PATCH v7 4/8] arm64: dts: imx8mm: Add the pcie phy support Richard Zhu
2022-01-26 2:25 ` Shawn Guo
2021-12-02 8:02 ` [PATCH v7 5/8] phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver Richard Zhu
2021-12-14 14:34 ` Vinod Koul
2021-12-29 12:39 ` Philip Molloy
2021-12-30 4:58 ` Hongxing Zhu
2022-01-02 0:25 ` Marcel Ziswiler
2021-12-02 8:02 ` [PATCH v7 6/8] arm64: dts: imx8mm: Add the pcie support Richard Zhu
2022-01-26 2:25 ` Shawn Guo
2021-12-02 8:02 ` Richard Zhu [this message]
2022-01-26 2:26 ` [PATCH v7 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm evk board Shawn Guo
2021-12-02 8:02 ` [PATCH v7 8/8] PCI: imx: Add the imx8mm pcie support Richard Zhu
2021-12-16 16:51 ` Krzysztof Wilczyński
2021-12-17 5:54 ` Hongxing Zhu
2021-12-23 11:49 ` Lorenzo Pieralisi
2021-12-24 2:09 ` Hongxing Zhu
2021-12-16 10:33 ` (subset) [PATCH v7 0/8] Add the imx8m pcie phy driver and " Lorenzo Pieralisi
2022-01-13 8:07 ` Marcel Ziswiler
2022-01-14 2:03 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1638432158-4119-8-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@kernel.crashing.org \
--cc=kernel@pengutronix.de \
--cc=kishon@ti.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marcel.ziswiler@toradex.com \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).