> > > > > ...1d.7: PCI fixup... pass 2 > > > > > ...1d.7: PCI fixup... pass 3 > > > > > ...1d.7: PCI fixup... pass 3 done > > > > > > > > > > ...followed by hang. So yes, it looks USB related. > > > > > > > > > > (Sometimes it hangs with some kind backtrace involving secondary CPU > > > > > startup, unfortunately useful info is off screen at that point). > > > > > > > > Forgot to say, 1d.7 is EHCI controller. > > > > > > > > 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI > > > > Controller (rev 01) > > > > > > Ok, I should have access soon to a EeePc 1015CX (which seem to have this controller). > > > I hope I'll be able to reproduce the issue there. If not, I'm sorry but I'll have to > > > burden you again :-) > > > > Go through more mails. It is only reproducible after cold boot. .. so > > I doubt it will be easy to reproduce on another machine. > > > > Now... I do have serial port, and I even might have serial cable > > somewhere, but.... Giving how sensitive it is, it is probably going to > > go away with console on ttyS... > > I also tried on an eeepc (which has ICH7/NM10 as well), with your config. > I even plugged a usb keyboard but even then I have been unable to > reproduce either :-( Ok, give me some time. I'm no longer using the affected machine, so no promises. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html