linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
To: <linux-pci@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>, <linux@yadro.com>,
	Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
Subject: [PATCH RFC v4 10/21] PCI: Fix assigning of fixed prefetchable resources
Date: Mon, 11 Mar 2019 16:31:11 +0300	[thread overview]
Message-ID: <20190311133122.11417-11-s.miroshnichenko@yadro.com> (raw)
In-Reply-To: <20190311133122.11417-1-s.miroshnichenko@yadro.com>

Allow matching them to non-prefetchable windows, as it is done for movable
resources.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/setup-bus.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 3644feb13179..be7d4e6d7b65 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1301,15 +1301,20 @@ static void assign_fixed_resource_on_bus(struct pci_bus *b, struct resource *r)
 {
 	int i;
 	struct resource *parent_r;
-	unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM |
-			     IORESOURCE_PREFETCH;
+	unsigned long mask = IORESOURCE_TYPE_BITS;
 
 	pci_bus_for_each_resource(b, parent_r, i) {
 		if (!parent_r)
 			continue;
 
-		if ((r->flags & mask) == (parent_r->flags & mask) &&
-		    resource_contains(parent_r, r))
+		if ((r->flags & mask) != (parent_r->flags & mask))
+			continue;
+
+		if (parent_r->flags & IORESOURCE_PREFETCH &&
+		    !(r->flags & IORESOURCE_PREFETCH))
+			continue;
+
+		if (resource_contains(parent_r, r))
 			request_resource(parent_r, r);
 	}
 }
-- 
2.20.1


  parent reply	other threads:[~2019-03-11 13:31 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-11 13:31 [PATCH RFC v4 00/21] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 01/21] PCI: Fix writing invalid BARs during pci_restore_state() Sergey Miroshnichenko
2019-03-26 14:02   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 02/21] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-03-26 19:00   ` Bjorn Helgaas
2019-03-27 17:11     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 03/21] PCI: Enable bridge's I/O and MEM access for hotplugged devices Sergey Miroshnichenko
2019-03-26 19:13   ` Bjorn Helgaas
2019-03-27 17:13     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 04/21] PCI: Define PCI-specific version of the release_child_resources() Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 05/21] PCI: hotplug: Add a flag for the movable BARs feature Sergey Miroshnichenko
2019-03-26 19:24   ` Bjorn Helgaas
2019-03-27 17:16     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 06/21] PCI: Pause the devices with movable BARs during rescan Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 07/21] PCI: Wake up bridges during rescan when movable BARs enabled Sergey Miroshnichenko
2019-03-26 19:28   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 08/21] nvme-pci: Handle movable BARs Sergey Miroshnichenko
2019-03-26 20:20   ` Bjorn Helgaas
2019-03-27 17:30     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 09/21] PCI: Mark immovable BARs with PCI_FIXED Sergey Miroshnichenko
2019-03-26 20:28   ` Bjorn Helgaas
2019-03-27 17:03     ` David Laight
2019-03-27 17:39       ` Sergey Miroshnichenko
2019-03-11 13:31 ` Sergey Miroshnichenko [this message]
2019-03-26 20:37   ` [PATCH RFC v4 10/21] PCI: Fix assigning of fixed prefetchable resources Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 11/21] PCI: Release and reassign the root bridge resources during rescan Sergey Miroshnichenko
2019-03-26 20:41   ` Bjorn Helgaas
2019-03-27 17:40     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 12/21] PCI: Don't allow hotplugged devices to steal resources Sergey Miroshnichenko
2019-03-26 20:55   ` Bjorn Helgaas
2019-03-27 18:02     ` Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 13/21] PCI: Include fixed BARs into the bus size calculating Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 14/21] PCI: Don't reserve memory for hotplug when enabled movable BARs Sergey Miroshnichenko
2019-03-26 20:57   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 15/21] PCI: Allow the failed resources to be reassigned later Sergey Miroshnichenko
2019-03-26 20:58   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 16/21] PCI: Calculate fixed areas of bridge windows based on fixed BARs Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 17/21] PCI: Calculate boundaries for bridge windows Sergey Miroshnichenko
2019-03-26 21:01   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 18/21] PCI: Make sure bridge windows include their fixed BARs Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 19/21] PCI: Prioritize fixed BAR assigning over the movable ones Sergey Miroshnichenko
2019-03-11 13:31 ` [PATCH RFC v4 20/21] PCI: pciehp: Add support for the movable BARs feature Sergey Miroshnichenko
2019-03-26 21:11   ` Bjorn Helgaas
2019-03-11 13:31 ` [PATCH RFC v4 21/21] powerpc/pci: Fix crash with enabled movable BARs Sergey Miroshnichenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190311133122.11417-11-s.miroshnichenko@yadro.com \
    --to=s.miroshnichenko@yadro.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@yadro.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).