From: Denis Efremov <efremov@linux.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Denis Efremov <efremov@linux.com>
Subject: [PATCH v2 2/4] PCI: pciehp: Switch LED indicators with a single write
Date: Sun, 11 Aug 2019 22:59:42 +0300 [thread overview]
Message-ID: <20190811195944.23765-3-efremov@linux.com> (raw)
In-Reply-To: <20190811195944.23765-1-efremov@linux.com>
This patch replaces all consecutive switches of power and attention
indicators with pciehp_set_indicators() call. Thus, performing only
single write to a register.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
---
drivers/pci/hotplug/pciehp_ctrl.c | 14 +++++---------
drivers/pci/hotplug/pciehp_hpc.c | 3 +--
2 files changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 631ced0ab28a..258a4060466d 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -42,8 +42,7 @@ static void set_slot_off(struct controller *ctrl)
msleep(1000);
}
- pciehp_green_led_off(ctrl);
- pciehp_set_attention_status(ctrl, 1);
+ pciehp_set_indicators(ctrl, PWR_OFF, ATTN_ON);
}
/**
@@ -90,8 +89,7 @@ static int board_added(struct controller *ctrl)
}
}
- pciehp_green_led_on(ctrl);
- pciehp_set_attention_status(ctrl, 0);
+ pciehp_set_indicators(ctrl, PWR_ON, ATTN_OFF);
return 0;
err_exit:
@@ -172,8 +170,7 @@ void pciehp_handle_button_press(struct controller *ctrl)
slot_name(ctrl));
}
/* blink green LED and turn off amber */
- pciehp_green_led_blink(ctrl);
- pciehp_set_attention_status(ctrl, 0);
+ pciehp_set_indicators(ctrl, PWR_BLINK, ATTN_OFF);
schedule_delayed_work(&ctrl->button_work, 5 * HZ);
break;
case BLINKINGOFF_STATE:
@@ -187,12 +184,11 @@ void pciehp_handle_button_press(struct controller *ctrl)
cancel_delayed_work(&ctrl->button_work);
if (ctrl->state == BLINKINGOFF_STATE) {
ctrl->state = ON_STATE;
- pciehp_green_led_on(ctrl);
+ pciehp_set_indicators(ctrl, PWR_ON, ATTN_OFF);
} else {
ctrl->state = OFF_STATE;
- pciehp_green_led_off(ctrl);
+ pciehp_set_indicators(ctrl, PWR_OFF, ATTN_OFF);
}
- pciehp_set_attention_status(ctrl, 0);
ctrl_info(ctrl, "Slot(%s): Action canceled due to button press\n",
slot_name(ctrl));
break;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 5a690b1579ec..68b880bc30db 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -676,8 +676,7 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
ctrl->power_fault_detected = 1;
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
- pciehp_set_attention_status(ctrl, 1);
- pciehp_green_led_off(ctrl);
+ pciehp_set_indicators(ctrl, PWR_OFF, ATTN_ON);
}
/*
--
2.21.0
next prev parent reply other threads:[~2019-08-11 20:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-11 19:59 [PATCH v2 0/4] Simplify PCIe hotplug indicator control Denis Efremov
2019-08-11 19:59 ` [PATCH v2 1/4] PCI: pciehp: Add pciehp_set_indicators() to jointly set LED indicators Denis Efremov
2019-08-12 6:30 ` Lukas Wunner
2019-08-12 18:25 ` sathyanarayanan kuppuswamy
2019-08-12 18:49 ` sathyanarayanan kuppuswamy
2019-08-12 20:40 ` Lukas Wunner
2019-08-12 21:03 ` sathyanarayanan kuppuswamy
2019-08-12 20:03 ` Bjorn Helgaas
2019-08-11 19:59 ` Denis Efremov [this message]
2019-08-12 18:27 ` [PATCH v2 2/4] PCI: pciehp: Switch LED indicators with a single write sathyanarayanan kuppuswamy
2019-08-11 19:59 ` [PATCH v2 3/4] PCI: pciehp: Replace pciehp_set_attention_status() Denis Efremov
2019-08-12 6:32 ` Lukas Wunner
2019-08-12 18:28 ` sathyanarayanan kuppuswamy
2019-08-11 19:59 ` [PATCH v2 4/4] PCI: pciehp: Replace pciehp_green_led_{on,off,blink}() Denis Efremov
2019-08-12 18:45 ` sathyanarayanan kuppuswamy
2019-08-12 20:03 ` Bjorn Helgaas
2019-08-12 21:14 ` Denis Efremov
2019-08-12 22:12 ` Bjorn Helgaas
2019-08-12 20:02 ` [PATCH v2 0/4] Simplify PCIe hotplug indicator control Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190811195944.23765-3-efremov@linux.com \
--to=efremov@linux.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).