linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jean-Philippe Brucker <jean-philippe@linaro.org>
To: iommu@lists.linux-foundation.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
	linux-mm@kvack.org
Cc: joro@8bytes.org, catalin.marinas@arm.com, will@kernel.org,
	robin.murphy@arm.com, kevin.tian@intel.com,
	baolu.lu@linux.intel.com, Jonathan.Cameron@huawei.com,
	jacob.jun.pan@linux.intel.com, christian.koenig@amd.com,
	zhangfei.gao@linaro.org, jgg@ziepe.ca, xuzaibo@huawei.com,
	Jean-Philippe Brucker <jean-philippe@linaro.org>
Subject: [PATCH v5 08/25] arm64: mm: Pin down ASIDs for sharing mm with devices
Date: Tue, 14 Apr 2020 19:02:36 +0200	[thread overview]
Message-ID: <20200414170252.714402-9-jean-philippe@linaro.org> (raw)
In-Reply-To: <20200414170252.714402-1-jean-philippe@linaro.org>

To enable address space sharing with the IOMMU, introduce mm_context_get()
and mm_context_put(), that pin down a context and ensure that it will keep
its ASID after a rollover. Export the symbols to let the modular SMMUv3
driver use them.

Pinning is necessary because a device constantly needs a valid ASID,
unlike tasks that only require one when running. Without pinning, we would
need to notify the IOMMU when we're about to use a new ASID for a task,
and it would get complicated when a new task is assigned a shared ASID.
Consider the following scenario with no ASID pinned:

1. Task t1 is running on CPUx with shared ASID (gen=1, asid=1)
2. Task t2 is scheduled on CPUx, gets ASID (1, 2)
3. Task tn is scheduled on CPUy, a rollover occurs, tn gets ASID (2, 1)
   We would now have to immediately generate a new ASID for t1, notify
   the IOMMU, and finally enable task tn. We are holding the lock during
   all that time, since we can't afford having another CPU trigger a
   rollover. The IOMMU issues invalidation commands that can take tens of
   milliseconds.

It gets needlessly complicated. All we wanted to do was schedule task tn,
that has no business with the IOMMU. By letting the IOMMU pin tasks when
needed, we avoid stalling the slow path, and let the pinning fail when
we're out of shareable ASIDs.

After a rollover, the allocator expects at least one ASID to be available
in addition to the reserved ones (one per CPU). So (NR_ASIDS - NR_CPUS -
1) is the maximum number of ASIDs that can be shared with the IOMMU.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
v4->v5: extract helper macro
---
 arch/arm64/include/asm/mmu.h         |  1 +
 arch/arm64/include/asm/mmu_context.h | 11 +++-
 arch/arm64/mm/context.c              | 95 +++++++++++++++++++++++++++-
 3 files changed, 104 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 68140fdd89d6b..bbdd291e31d59 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -19,6 +19,7 @@
 
 typedef struct {
 	atomic64_t	id;
+	unsigned long	pinned;
 	void		*vdso;
 	unsigned long	flags;
 } mm_context_t;
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index ab46187c63001..69599a64945b0 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -177,7 +177,13 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp)
 #define destroy_context(mm)		do { } while(0)
 void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
 
-#define init_new_context(tsk,mm)	({ atomic64_set(&(mm)->context.id, 0); 0; })
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	atomic64_set(&mm->context.id, 0);
+	mm->context.pinned = 0;
+	return 0;
+}
 
 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
 static inline void update_saved_ttbr0(struct task_struct *tsk,
@@ -250,6 +256,9 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 void verify_cpu_asid_bits(void);
 void post_ttbr_update_workaround(void);
 
+unsigned long mm_context_get(struct mm_struct *mm);
+void mm_context_put(struct mm_struct *mm);
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* !__ASM_MMU_CONTEXT_H */
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index d702d60e64dab..d0ddd413f5645 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -27,6 +27,10 @@ static DEFINE_PER_CPU(atomic64_t, active_asids);
 static DEFINE_PER_CPU(u64, reserved_asids);
 static cpumask_t tlb_flush_pending;
 
+static unsigned long max_pinned_asids;
+static unsigned long nr_pinned_asids;
+static unsigned long *pinned_asid_map;
+
 #define ASID_MASK		(~GENMASK(asid_bits - 1, 0))
 #define ASID_FIRST_VERSION	(1UL << asid_bits)
 
@@ -74,6 +78,9 @@ void verify_cpu_asid_bits(void)
 
 static void set_kpti_asid_bits(void)
 {
+	unsigned int k;
+	u8 *dst = (u8 *)asid_map;
+	u8 *src = (u8 *)pinned_asid_map;
 	unsigned int len = BITS_TO_LONGS(NUM_USER_ASIDS) * sizeof(unsigned long);
 	/*
 	 * In case of KPTI kernel/user ASIDs are allocated in
@@ -81,7 +88,8 @@ static void set_kpti_asid_bits(void)
 	 * is set, then the ASID will map only userspace. Thus
 	 * mark even as reserved for kernel.
 	 */
-	memset(asid_map, 0xaa, len);
+	for (k = 0; k < len; k++)
+		dst[k] = src[k] | 0xaa;
 }
 
 static void set_reserved_asid_bits(void)
@@ -89,7 +97,7 @@ static void set_reserved_asid_bits(void)
 	if (arm64_kernel_unmapped_at_el0())
 		set_kpti_asid_bits();
 	else
-		bitmap_clear(asid_map, 0, NUM_USER_ASIDS);
+		bitmap_copy(asid_map, pinned_asid_map, NUM_USER_ASIDS);
 }
 
 #define asid_gen_match(asid) \
@@ -165,6 +173,14 @@ static u64 new_context(struct mm_struct *mm)
 		if (check_update_reserved_asid(asid, newasid))
 			return newasid;
 
+		/*
+		 * If it is pinned, we can keep using it. Note that reserved
+		 * takes priority, because even if it is also pinned, we need to
+		 * update the generation into the reserved_asids.
+		 */
+		if (mm->context.pinned)
+			return newasid;
+
 		/*
 		 * We had a valid ASID in a previous life, so try to re-use
 		 * it if possible.
@@ -254,6 +270,68 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
 		cpu_switch_mm(mm->pgd, mm);
 }
 
+unsigned long mm_context_get(struct mm_struct *mm)
+{
+	unsigned long flags;
+	u64 asid;
+
+	raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+
+	asid = atomic64_read(&mm->context.id);
+
+	if (mm->context.pinned) {
+		mm->context.pinned++;
+		asid &= ~ASID_MASK;
+		goto out_unlock;
+	}
+
+	if (nr_pinned_asids >= max_pinned_asids) {
+		asid = 0;
+		goto out_unlock;
+	}
+
+	if (!asid_gen_match(asid)) {
+		/*
+		 * We went through one or more rollover since that ASID was
+		 * used. Ensure that it is still valid, or generate a new one.
+		 */
+		asid = new_context(mm);
+		atomic64_set(&mm->context.id, asid);
+	}
+
+	asid &= ~ASID_MASK;
+
+	nr_pinned_asids++;
+	__set_bit(asid2idx(asid), pinned_asid_map);
+	mm->context.pinned++;
+
+out_unlock:
+	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+
+	/* Set the equivalent of USER_ASID_BIT */
+	if (asid && IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0))
+		asid |= 1;
+
+	return asid;
+}
+EXPORT_SYMBOL_GPL(mm_context_get);
+
+void mm_context_put(struct mm_struct *mm)
+{
+	unsigned long flags;
+	u64 asid = atomic64_read(&mm->context.id) & ~ASID_MASK;
+
+	raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+
+	if (--mm->context.pinned == 0) {
+		__clear_bit(asid2idx(asid), pinned_asid_map);
+		nr_pinned_asids--;
+	}
+
+	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+}
+EXPORT_SYMBOL_GPL(mm_context_put);
+
 /* Errata workaround post TTBRx_EL1 update. */
 asmlinkage void post_ttbr_update_workaround(void)
 {
@@ -303,6 +381,13 @@ static int asids_update_limit(void)
 	WARN_ON(num_available_asids - 1 <= num_possible_cpus());
 	pr_info("ASID allocator initialised with %lu entries\n",
 		num_available_asids);
+
+	/*
+	 * We assume that an ASID is always available after a rollover. This
+	 * means that even if all CPUs have a reserved ASID, there still is at
+	 * least one slot available in the asid map.
+	 */
+	max_pinned_asids = num_available_asids - num_possible_cpus() - 2;
 	return 0;
 }
 arch_initcall(asids_update_limit);
@@ -317,6 +402,12 @@ static int asids_init(void)
 		panic("Failed to allocate bitmap for %lu ASIDs\n",
 		      NUM_USER_ASIDS);
 
+	pinned_asid_map = kcalloc(BITS_TO_LONGS(NUM_USER_ASIDS),
+				  sizeof(*pinned_asid_map), GFP_KERNEL);
+	if (!pinned_asid_map)
+		panic("Failed to allocate pinned ASID bitmap\n");
+	nr_pinned_asids = 0;
+
 	/*
 	 * We cannot call set_reserved_asid_bits() here because CPU
 	 * caps are not finalized yet, so it is safer to assume KPTI
-- 
2.26.0


  parent reply	other threads:[~2020-04-14 17:04 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-14 17:02 [PATCH v5 00/25] iommu: Shared Virtual Addressing and SMMUv3 support Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 01/25] mm/mmu_notifiers: pass private data down to alloc_notifier() Jean-Philippe Brucker
2020-04-14 18:09   ` Jason Gunthorpe
2020-04-14 17:02 ` [PATCH v5 02/25] iommu/sva: Manage process address spaces Jean-Philippe Brucker
2020-04-16  7:28   ` Christoph Hellwig
2020-04-16  8:54     ` Jean-Philippe Brucker
2020-04-16 12:13       ` Christoph Hellwig
2020-04-20  7:42         ` Jean-Philippe Brucker
2020-04-20  8:10           ` Christoph Hellwig
2020-04-20 11:44             ` Christian König
2020-04-20 11:55               ` Christoph Hellwig
2020-04-20 12:40                 ` Christian König
2020-04-20 15:00                   ` Felix Kuehling
2020-04-20 17:44                     ` Jacob Pan
2020-04-20 13:57           ` Jason Gunthorpe
2020-04-20 17:48             ` Jacob Pan
2020-04-20 18:14               ` Fenghua Yu
2020-04-21  8:55                 ` Christoph Hellwig
2020-04-14 17:02 ` [PATCH v5 03/25] iommu: Add a page fault handler Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 04/25] iommu/sva: Search mm by PASID Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 05/25] iommu/iopf: Handle mm faults Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 06/25] iommu/sva: Register page fault handler Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 07/25] arm64: mm: Add asid_gen_match() helper Jean-Philippe Brucker
2020-04-14 17:02 ` Jean-Philippe Brucker [this message]
2020-04-14 17:02 ` [PATCH v5 09/25] iommu/io-pgtable-arm: Move some definitions to a header Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 10/25] iommu/arm-smmu-v3: Manage ASIDs with xarray Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 11/25] arm64: cpufeature: Export symbol read_sanitised_ftr_reg() Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 12/25] iommu/arm-smmu-v3: Share process page tables Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 13/25] iommu/arm-smmu-v3: Seize private ASID Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 14/25] iommu/arm-smmu-v3: Add support for VHE Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 15/25] iommu/arm-smmu-v3: Enable broadcast TLB maintenance Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 16/25] iommu/arm-smmu-v3: Add SVA feature checking Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 17/25] iommu/arm-smmu-v3: Implement mm operations Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 18/25] iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 19/25] iommu/arm-smmu-v3: Add support for Hardware Translation Table Update Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 20/25] iommu/arm-smmu-v3: Maintain a SID->device structure Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 21/25] dt-bindings: document stall property for IOMMU masters Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 22/25] iommu/arm-smmu-v3: Add stall support for platform devices Jean-Philippe Brucker
2020-04-14 17:02 ` [PATCH v5 23/25] PCI/ATS: Add PRI stubs Jean-Philippe Brucker
2020-04-14 18:03   ` Kuppuswamy, Sathyanarayanan
2020-04-14 17:02 ` [PATCH v5 24/25] PCI/ATS: Export PRI functions Jean-Philippe Brucker
2020-04-14 18:03   ` Kuppuswamy, Sathyanarayanan
2020-04-14 17:02 ` [PATCH v5 25/25] iommu/arm-smmu-v3: Add support for PRI Jean-Philippe Brucker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200414170252.714402-9-jean-philippe@linaro.org \
    --to=jean-philippe@linaro.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=catalin.marinas@arm.com \
    --cc=christian.koenig@amd.com \
    --cc=devicetree@vger.kernel.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jgg@ziepe.ca \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=xuzaibo@huawei.com \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).