linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: linux-pci@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Gregory Clement" <gregory.clement@bootlin.com>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Andrew Murray" <amurray@thegoodpenguin.co.uk>,
	"Remi Pommarel" <repk@triplefau.lt>,
	"Tomasz Maciej Nowak" <tmn505@gmail.com>,
	Xogium <contact@xogium.me>, "Rob Herring" <robh@kernel.org>,
	"Marek Behún" <marek.behun@nic.cz>,
	"Bjorn Helgaas" <helgaas@kernel.org>
Subject: [PATCH v3 07/12] PCI: aardvark: Add PHY support
Date: Fri, 24 Apr 2020 17:38:53 +0200	[thread overview]
Message-ID: <20200424153858.29744-8-pali@kernel.org> (raw)
In-Reply-To: <20200424153858.29744-1-pali@kernel.org>

From: Marek Behún <marek.behun@nic.cz>

With recent proposed changes for U-Boot it is possible that bootloader
won't initialize the PHY for this controller (currently the PHY is
initialized regardless whether PCI is used in U-Boot, but with these
proposed changes the PHY is initialized only on request).

Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling
PCIe PHY, and since Linux' functionality should be independent on what
bootloader did, add code for enabling generic PHY if found in device OF
node.

The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM
Trusted Firmware. The corresponding code in ARM Trusted Firmware skips
one register write which U-Boot does not: step 7 ("Enable TX"), see [1].
Instead ARM Trusted Firmware expects PCIe driver to do this step,
probably because the register is in PCIe controller address space,
instead of PHY address space. We therefore add this step into the
advk_pcie_setup_hw function.

[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
---
 drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 8e1f61d82c21..7a4f395c5812 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
@@ -104,6 +105,8 @@
 #define     PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE	BIT(5)
 #define     PCIE_CORE_CTRL2_OB_WIN_ENABLE	BIT(6)
 #define     PCIE_CORE_CTRL2_MSI_ENABLE		BIT(10)
+#define PCIE_CORE_REF_CLK_REG			(CONTROL_BASE_ADDR + 0x14)
+#define     PCIE_CORE_REF_CLK_TX_ENABLE		BIT(1)
 #define PCIE_MSG_LOG_REG			(CONTROL_BASE_ADDR + 0x30)
 #define PCIE_ISR0_REG				(CONTROL_BASE_ADDR + 0x40)
 #define PCIE_MSG_PM_PME_MASK			BIT(7)
@@ -207,6 +210,7 @@ struct advk_pcie {
 	int link_gen;
 	struct pci_bridge_emul bridge;
 	struct gpio_desc *reset_gpio;
+	struct phy *phy;
 };
 
 static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -358,6 +362,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 
 	advk_pcie_issue_perst(pcie);
 
+	/* Enable TX */
+	reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
+	reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
+	advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
+
 	/* Set to Direct mode */
 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
 	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -1041,6 +1050,62 @@ static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
+{
+	phy_power_off(pcie->phy);
+	phy_exit(pcie->phy);
+}
+
+static int advk_pcie_enable_phy(struct advk_pcie *pcie)
+{
+	int ret;
+
+	if (!pcie->phy)
+		return 0;
+
+	ret = phy_init(pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
+	if (ret) {
+		phy_exit(pcie->phy);
+		return ret;
+	}
+
+	ret = phy_power_on(pcie->phy);
+	if (ret) {
+		phy_exit(pcie->phy);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int advk_pcie_setup_phy(struct advk_pcie *pcie)
+{
+	struct device *dev = &pcie->pdev->dev;
+	struct device_node *node = dev->of_node;
+	int ret = 0;
+
+	pcie->phy = devm_of_phy_get(dev, node, NULL);
+	if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER))
+		return PTR_ERR(pcie->phy);
+
+	/* Old bindings miss the PHY handle */
+	if (IS_ERR(pcie->phy)) {
+		dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie->phy));
+		pcie->phy = NULL;
+		return 0;
+	}
+
+	ret = advk_pcie_enable_phy(pcie);
+	if (ret)
+		dev_err(dev, "Failed to initialize PHY (%d)\n", ret);
+
+	return ret;
+}
+
 static int advk_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1099,6 +1164,10 @@ static int advk_pcie_probe(struct platform_device *pdev)
 		return ret;
 	pcie->link_gen = (ret > 3) ? 3 : ret;
 
+	ret = advk_pcie_setup_phy(pcie);
+	if (ret)
+		return ret;
+
 	advk_pcie_setup_hw(pcie);
 
 	advk_sw_pci_bridge_init(pcie);
-- 
2.20.1


  parent reply	other threads:[~2020-04-24 15:39 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-24 15:38 [PATCH v3 00/12] PCI: aardvark: Fix support for Turris MOX and Compex wifi cards Pali Rohár
2020-04-24 15:38 ` [PATCH v3 01/12] PCI: aardvark: Train link immediately after enabling training Pali Rohár
2020-04-24 15:38 ` [PATCH v3 02/12] PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register Pali Rohár
2020-04-24 15:38 ` [PATCH v3 03/12] PCI: of: Return -ENOENT if max-link-speed property is not found Pali Rohár
2020-04-24 16:47   ` Rob Herring
2020-04-27  9:00     ` Pali Rohár
2020-04-28 15:52       ` Rob Herring
2020-04-28 16:01         ` Pali Rohár
2020-04-28 23:55           ` Marek Behun
2020-04-28 16:23         ` Bjorn Helgaas
2020-04-24 15:38 ` [PATCH v3 04/12] PCI: aardvark: Improve link training Pali Rohár
2020-04-24 17:00   ` Rob Herring
2020-04-24 18:55     ` Pali Rohár
2020-04-27  9:30       ` Pali Rohár
2020-04-24 15:38 ` [PATCH v3 05/12] PCI: aardvark: Issue PERST via GPIO Pali Rohár
2020-04-24 17:05   ` Rob Herring
2020-04-27  9:22     ` Pali Rohár
2020-04-24 15:38 ` [PATCH v3 06/12] PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access Pali Rohár
2020-04-24 15:38 ` Pali Rohár [this message]
2020-04-24 15:38 ` [PATCH v3 08/12] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Pali Rohár
2020-04-24 18:52   ` Bjorn Helgaas
2020-04-24 15:38 ` [PATCH v3 09/12] dt-bindings: PCI: aardvark: Describe new properties Pali Rohár
2020-04-24 15:38 ` [PATCH v3 10/12] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Pali Rohár
2020-04-24 15:38 ` [PATCH v3 11/12] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle property Pali Rohár
2020-04-24 15:38 ` [PATCH v3 12/12] arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200424153858.29744-8-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=amurray@thegoodpenguin.co.uk \
    --cc=andrew@lunn.ch \
    --cc=contact@xogium.me \
    --cc=gregory.clement@bootlin.com \
    --cc=helgaas@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marek.behun@nic.cz \
    --cc=repk@triplefau.lt \
    --cc=robh@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tmn505@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).