v2 -- Use regulator bulk API rather than multiple calls (MarkB).

v1 -- Bindings are added for fixed regulators that may power the EP device.
   -- The brcmstb RC driver is modified to control these regulators
      during probe, suspend, and resume.
   -- 7216 type SOCs have additional error reporting HW and a
      panic handler is added to dump its info.
   -- A missing return value check is added.


Jim Quinlan (6):
  dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
  PCI: brcmstb: Add control of EP voltage regulator(s)
  PCI: brcmstb: Do not turn off regulators if EP can wake up
  PCI: brcmstb: Give 7216 SOCs their own config type
  PCI: brcmstb: Add panic/die handler to RC driver
  PCI: brcmstb: check return value of clk_prepare_enable()

 .../bindings/pci/brcm,stb-pcie.yaml           |  12 +
 drivers/pci/controller/pcie-brcmstb.c         | 219 +++++++++++++++++-
 2 files changed, 228 insertions(+), 3 deletions(-)

-- 
2.17.1