linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Ben Widawsky <ben.widawsky@intel.com>,
	linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
	ira.weiny@intel.com, vishal.l.verma@intel.com,
	alison.schofield@intel.com, dan.j.williams@intel.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/7] cxl/mem: Get rid of @cxlm.base
Date: Wed,  7 Apr 2021 15:26:22 -0700	[thread overview]
Message-ID: <20210407222625.320177-5-ben.widawsky@intel.com> (raw)
In-Reply-To: <20210407222625.320177-1-ben.widawsky@intel.com>

@cxlm.base only existed to support holding the base found in the
register block mapping code, and pass it along to the register setup
code. Now that the register setup function has all logic around managing
the registers, from DVSEC to iomapping up to populating our CXL specific
information, it is easy to turn the @base values into local variables
and remove them from our device driver state.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
 drivers/cxl/mem.c | 24 +++++++++++-------------
 drivers/cxl/mem.h |  2 --
 2 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 04b4f7445083..60b95c524c3e 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -922,11 +922,10 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev)
 	return cxlm;
 }
 
-static int cxl_mem_map_regblock(struct cxl_mem *cxlm, u32 reg_lo, u32 reg_hi)
+static void __iomem *cxl_mem_map_regblock(struct cxl_mem *cxlm, u32 reg_lo, u32 reg_hi)
 {
 	struct pci_dev *pdev = cxlm->pdev;
 	struct device *dev = &pdev->dev;
-	void __iomem *regs;
 	u64 offset;
 	u8 bar;
 	int rc;
@@ -938,20 +937,18 @@ static int cxl_mem_map_regblock(struct cxl_mem *cxlm, u32 reg_lo, u32 reg_hi)
 	if (pci_resource_len(pdev, bar) < offset) {
 		dev_err(dev, "BAR%d: %pr: too small (offset: %#llx)\n", bar,
 			&pdev->resource[bar], (unsigned long long)offset);
-		return -ENXIO;
+		return (void __iomem *)ERR_PTR(-ENXIO);
 	}
 
 	rc = pcim_iomap_regions(pdev, BIT(bar), pci_name(pdev));
 	if (rc) {
 		dev_err(dev, "failed to map registers\n");
-		return rc;
+		return (void __iomem *)ERR_PTR(rc);
 	}
-	regs = pcim_iomap_table(pdev)[bar];
-
-	cxlm->base = regs + offset;
 
 	dev_dbg(dev, "Mapped CXL Memory Device resource\n");
-	return 0;
+
+	return pcim_iomap_table(pdev)[bar] + offset;
 }
 
 static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
@@ -993,7 +990,8 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 	struct pci_dev *pdev = cxlm->pdev;
 	struct device *dev = &pdev->dev;
 	u32 regloc_size, regblocks;
-	int rc, regloc, i;
+	void __iomem *base;
+	int regloc, i;
 
 	regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC_OFFSET);
 	if (!regloc) {
@@ -1019,9 +1017,9 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 		reg_type = FIELD_GET(CXL_REGLOC_RBI_MASK, reg_lo);
 
 		if (reg_type == CXL_REGLOC_RBI_MEMDEV) {
-			rc = cxl_mem_map_regblock(cxlm, reg_lo, reg_hi);
-			if (rc)
-				return rc;
+			base = cxl_mem_map_regblock(cxlm, reg_lo, reg_hi);
+			if (IS_ERR(base))
+				return PTR_ERR(base);
 			break;
 		}
 	}
@@ -1031,7 +1029,7 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 		return -ENXIO;
 	}
 
-	cxl_setup_device_regs(dev, cxlm->base, &regs->device_regs);
+	cxl_setup_device_regs(dev, base, &regs->device_regs);
 
 	if (!regs->status || !regs->mbox || !regs->memdev) {
 		dev_err(dev, "registers not found: %s%s%s\n",
diff --git a/drivers/cxl/mem.h b/drivers/cxl/mem.h
index 8bad7166adba..bfcfef461b16 100644
--- a/drivers/cxl/mem.h
+++ b/drivers/cxl/mem.h
@@ -49,7 +49,6 @@ struct cxl_memdev {
 /**
  * struct cxl_mem - A CXL memory device
  * @pdev: The PCI device associated with this CXL device.
- * @base: IO mappings to the device's MMIO
  * @cxlmd: Logical memory device chardev / interface
  * @regs: Parsed register blocks
  * @payload_size: Size of space for payload
@@ -62,7 +61,6 @@ struct cxl_memdev {
  */
 struct cxl_mem {
 	struct pci_dev *pdev;
-	void __iomem *base;
 	struct cxl_memdev *cxlmd;
 
 	struct cxl_regs regs;
-- 
2.31.1


  parent reply	other threads:[~2021-04-07 22:27 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 22:26 [PATCH 0/7] Enumerate HDM Decoder registers Ben Widawsky
2021-04-07 22:26 ` [PATCH 1/7] cxl/mem: Use dev instead of pdev->dev Ben Widawsky
2021-04-08 17:08   ` Jonathan Cameron
2021-04-07 22:26 ` [PATCH 2/7] cxl/mem: Split creation from mapping in probe Ben Widawsky
2021-04-08 17:13   ` Jonathan Cameron
2021-04-07 22:26 ` [PATCH 3/7] cxl/mem: Move register locator logic into reg setup Ben Widawsky
2021-04-08 17:27   ` Jonathan Cameron
2021-04-07 22:26 ` Ben Widawsky [this message]
2021-04-08 17:26   ` [PATCH 4/7] cxl/mem: Get rid of @cxlm.base Jonathan Cameron
2021-04-13 16:17     ` Ben Widawsky
2021-04-14  9:24       ` Jonathan Cameron
2021-05-20 21:29       ` [PATCH v2 " Ben Widawsky
2021-04-07 22:26 ` [PATCH 5/7] cxl/mem: Move device register setup Ben Widawsky
2021-04-08 17:28   ` Jonathan Cameron
2021-04-07 22:26 ` [PATCH 6/7] cxl/mem: Create a helper to setup device regs Ben Widawsky
2021-04-08 17:33   ` Jonathan Cameron
2021-04-15 22:54   ` Dan Williams
2021-04-07 22:26 ` [PATCH 7/7] cxl: Add HDM decoder capbilities Ben Widawsky
2021-04-08 17:57   ` Jonathan Cameron
2021-04-15 23:27   ` Dan Williams
2021-04-15 23:50     ` Ben Widawsky
2021-04-16  0:25       ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210407222625.320177-5-ben.widawsky@intel.com \
    --to=ben.widawsky@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).