linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Russell King <linux@armlinux.org.uk>,
	Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Jason Gunthorpe <jgg@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] ARM: Marvell: Update PCIe fixup
Date: Tue,  2 Nov 2021 18:12:58 +0100	[thread overview]
Message-ID: <20211102171259.9590-1-pali@kernel.org> (raw)
In-Reply-To: <20211101150405.14618-1-pali@kernel.org>

- The code relies on rc_pci_fixup being called, which only happens
  when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting
  this causes a booting failure with a non-obvious cause.
- Update rc_pci_fixup to set the class properly, copying the
  more modern style from other places
- Correct the rc_pci_fixup comment

This patch just re-applies commit 1dc831bf53fd ("ARM: Kirkwood: Update
PCI-E fixup") for all other Marvell ARM platforms which have same buggy
PCIe controller and do not use pci-mvebu.c controller driver yet.

Long-term goal for these Marvell ARM platforms should be conversion to
pci-mvebu.c controller driver and removal of these fixups in arch code.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: stable@vger.kernel.org

---
Changes in v2:
* Move MIPS change into separate patch
* Add information that this patch is for platforms which do not use pci-mvebu.c
---
 arch/arm/Kconfig              |  1 +
 arch/arm/mach-dove/pcie.c     | 11 ++++++++---
 arch/arm/mach-mv78xx0/pcie.c  | 11 ++++++++---
 arch/arm/mach-orion5x/Kconfig |  1 +
 arch/arm/mach-orion5x/pci.c   | 12 +++++++++---
 5 files changed, 27 insertions(+), 9 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fc196421b2ce..9f157e973555 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -400,6 +400,7 @@ config ARCH_DOVE
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_PCI
+	select PCI_QUIRKS if PCI
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index ee91ac6b5ebf..ecf057a0f5ba 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -135,14 +135,19 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 636d84b40466..9362b5fc116f 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -177,14 +177,19 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index e94a61901ffd..7189a5b1ec46 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X
 	select GPIOLIB
 	select MVEBU_MBUS
 	select FORCE_PCI
+	select PCI_QUIRKS
 	select PHYLIB if NETDEVICES
 	select PLAT_ORION_LEGACY
 	help
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 76951bfbacf5..5145fe89702e 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -509,14 +509,20 @@ static int __init pci_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * General PCIe + PCI
  ****************************************************************************/
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
-- 
2.20.1


  parent reply	other threads:[~2021-11-02 17:13 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-01 15:04 [PATCH] PCI: Marvell: Update PCIe fixup Pali Rohár
2021-11-01 16:27 ` Jason Gunthorpe
2021-11-01 17:56   ` Pali Rohár
2021-11-01 18:03     ` Jason Gunthorpe
2021-11-02  8:42 ` Thomas Bogendoerfer
2021-11-02  9:02   ` Pali Rohár
2021-11-02  9:47     ` Thomas Bogendoerfer
2021-11-02 10:00       ` Pali Rohár
2021-11-02 12:35         ` Maciej W. Rozycki
2021-11-02 12:58           ` Pali Rohár
2021-11-02 14:01             ` Maciej W. Rozycki
2021-11-02 14:49               ` Pali Rohár
2021-11-02 15:48                 ` Pali Rohár
2021-11-02 17:03                   ` Stefan Roese
2021-11-03 14:59                   ` Maciej W. Rozycki
2021-11-03 14:49                 ` Maciej W. Rozycki
2021-11-03 15:03                   ` Pali Rohár
2021-11-02 15:02         ` Thomas Bogendoerfer
2021-11-02 15:13           ` Pali Rohár
2021-11-09 23:42             ` Pali Rohár
2021-11-10  8:55               ` Thomas Bogendoerfer
2021-11-02 17:12 ` Pali Rohár [this message]
2021-11-09 22:53   ` [PATCH v2 1/2] ARM: " Pali Rohár
2022-05-14 18:21     ` Pali Rohár
2022-07-07 18:31       ` Pali Rohár
2022-07-07 19:22         ` Russell King (Oracle)
2022-02-19 14:30   ` Pali Rohár
2022-07-18 10:34     ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211102171259.9590-1-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=gregory.clement@bootlin.com \
    --cc=jgg@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).