linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Dan Williams <dan.j.williams@intel.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Ben Widawsky <ben.widawsky@intel.com>,
	linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org,
	linux-pci@vger.kernel.org
Subject: [PATCH V8 10/10] cxl/port: Parse out DSMAS data from CDAT table
Date: Thu, 14 Apr 2022 13:32:37 -0700	[thread overview]
Message-ID: <20220414203237.2198665-11-ira.weiny@intel.com> (raw)
In-Reply-To: <20220414203237.2198665-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

CXL Ports with memory devices attached need the information from the
Device Scoped Memory Affinity Structure (DSMAS).  This information is
contained within the CDAT table buffer which is previously read and
cached in the device state.

If CDAT data is available, parse and cache DSMAS data from the table.
Store this data in unmarshaled struct dsmas data structures for ease of
use.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes from V7
	Rebased on cxl-pending

Changes from V6
	Move to port.c
	It is not an error if no DSMAS data is found

Changes from V5
	Fix up sparse warnings
	Split out cdat_hdr_valid()
	Update cdat_hdr_valid()
		Remove revision and cs field parsing
			There is no point in these
		Add seq check and debug print.
	From Jonathan
		Add spaces around '+' and '/'
		use devm_krealloc() for dmas_ary
---
 drivers/cxl/cdat.h | 17 ++++++++++++
 drivers/cxl/cxl.h  |  6 +++++
 drivers/cxl/port.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 88 insertions(+)

diff --git a/drivers/cxl/cdat.h b/drivers/cxl/cdat.h
index a7725d26f2d2..66706b238bc9 100644
--- a/drivers/cxl/cdat.h
+++ b/drivers/cxl/cdat.h
@@ -83,6 +83,23 @@
 #define CDAT_SSLBIS_ENTRY_PORT_Y(entry, i) (((entry)[4 + (i) * 2] & 0xffff0000) >> 16)
 #define CDAT_SSLBIS_ENTRY_LAT_OR_BW(entry, i) ((entry)[4 + (i) * 2 + 1] & 0x0000ffff)
 
+/**
+ * struct cxl_dsmas - host unmarshaled version of DSMAS data
+ *
+ * As defined in the Coherent Device Attribute Table (CDAT) specification this
+ * represents a single DSMAS entry in that table.
+ *
+ * @dpa_base: The lowest Device Physical Address associated with this DSMAD
+ * @length: Length in bytes of this DSMAD
+ * @non_volatile: If set, the memory region represents Non-Volatile memory
+ */
+struct cxl_dsmas {
+	u64 dpa_base;
+	u64 length;
+	/* Flags */
+	u8 non_volatile:1;
+};
+
 /**
  * struct cxl_cdat - CXL CDAT data
  *
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 50817fd2c912..80fd39769a65 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -9,6 +9,8 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 
+#include "cdat.h"
+
 /**
  * DOC: cxl objects
  *
@@ -269,6 +271,8 @@ struct cxl_nvdimm {
  * @component_reg_phys: component register capability base address (optional)
  * @dead: last ep has been removed, force port re-creation
  * @depth: How deep this port is relative to the root. depth 0 is the root.
+ * @dsmas_ary: Array of DSMAS entries as parsed from the CDAT table
+ * @nr_dsmas: Number of entries in dsmas_ary
  */
 struct cxl_port {
 	struct device dev;
@@ -280,6 +284,8 @@ struct cxl_port {
 	resource_size_t component_reg_phys;
 	bool dead;
 	unsigned int depth;
+	struct cxl_dsmas *dsmas_ary;
+	int nr_dsmas;
 };
 
 /**
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index d420da5fc39c..2288432a27cd 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -30,6 +30,70 @@ static void schedule_detach(void *cxlmd)
 	schedule_cxl_memdev_detach(cxlmd);
 }
 
+static void parse_dsmas(struct cxl_port *port, struct cxl_dev_state *cxlds)
+{
+	struct device *dev = &port->dev;
+	struct cxl_dsmas *dsmas_ary = NULL;
+	u32 *data = cxlds->cdat.table;
+	int bytes_left = cxlds->cdat.length;
+	int nr_dsmas = 0;
+
+	if (!data) {
+		dev_info(dev, "No CDAT data available for DSMAS\n");
+		return;
+	}
+
+	/* Skip header */
+	data += CDAT_HEADER_LENGTH_DW;
+	bytes_left -= CDAT_HEADER_LENGTH_BYTES;
+
+	while (bytes_left > 0) {
+		u32 *cur_rec = data;
+		u8 type = FIELD_GET(CDAT_STRUCTURE_DW0_TYPE, cur_rec[0]);
+		u16 length = FIELD_GET(CDAT_STRUCTURE_DW0_LENGTH, cur_rec[0]);
+
+		if (type == CDAT_STRUCTURE_DW0_TYPE_DSMAS) {
+			struct cxl_dsmas *new_ary;
+			u8 flags;
+
+			new_ary = devm_krealloc(dev, dsmas_ary,
+					   sizeof(*dsmas_ary) * (nr_dsmas + 1),
+					   GFP_KERNEL);
+			if (!new_ary) {
+				dev_err(dev,
+					"Failed to allocate memory for DSMAS data (nr_dsmas %d)\n",
+					nr_dsmas);
+				return;
+			}
+			dsmas_ary = new_ary;
+
+			flags = FIELD_GET(CDAT_DSMAS_DW1_FLAGS, cur_rec[1]);
+
+			dsmas_ary[nr_dsmas].dpa_base = CDAT_DSMAS_DPA_OFFSET(cur_rec);
+			dsmas_ary[nr_dsmas].length = CDAT_DSMAS_DPA_LEN(cur_rec);
+			dsmas_ary[nr_dsmas].non_volatile = CDAT_DSMAS_NON_VOLATILE(flags);
+
+			dev_dbg(dev, "DSMAS %d: %llx:%llx %s\n",
+				nr_dsmas,
+				dsmas_ary[nr_dsmas].dpa_base,
+				dsmas_ary[nr_dsmas].dpa_base +
+					dsmas_ary[nr_dsmas].length,
+				(dsmas_ary[nr_dsmas].non_volatile ?
+					"Persistent" : "Volatile")
+				);
+
+			nr_dsmas++;
+		}
+
+		data += (length / sizeof(u32));
+		bytes_left -= length;
+	}
+
+	dev_dbg(dev, "Found %d DSMAS entries\n", nr_dsmas);
+	port->dsmas_ary = dsmas_ary;
+	port->nr_dsmas = nr_dsmas;
+}
+
 static int cxl_port_probe(struct device *dev)
 {
 	struct cxl_port *port = to_cxl_port(dev);
@@ -43,6 +107,7 @@ static int cxl_port_probe(struct device *dev)
 		rc = devm_add_action_or_reset(dev, schedule_detach, cxlmd);
 		if (rc)
 			return rc;
+		parse_dsmas(port, cxlmd->cxlds);
 	} else {
 		rc = devm_cxl_port_enumerate_dports(port);
 		if (rc < 0)
-- 
2.35.1


  parent reply	other threads:[~2022-04-14 20:33 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-14 20:32 [PATCH V8 00/10] CXL: Read CDAT and DSMAS data from the device ira.weiny
2022-04-14 20:32 ` [PATCH V8 01/10] PCI: Add vendor ID for the PCI SIG ira.weiny
2022-04-14 20:32 ` [PATCH V8 02/10] PCI: Replace magic constant for PCI Sig Vendor ID ira.weiny
2022-04-14 20:32 ` [PATCH V8 03/10] PCI: Create PCI library functions in support of DOE mailboxes ira.weiny
2022-04-28 21:27   ` Bjorn Helgaas
2022-05-02  5:36     ` ira.weiny
2022-05-30 19:06   ` Lukas Wunner
2022-05-31 10:33     ` Jonathan Cameron
2022-06-01  2:59       ` Ira Weiny
2022-06-01  7:18         ` Lukas Wunner
2022-06-01 14:23           ` Jonathan Cameron
2022-06-01 17:16           ` Ira Weiny
2022-06-01 17:56             ` Lukas Wunner
2022-06-01 20:17               ` Ira Weiny
2022-06-06 14:46             ` Jonathan Cameron
2022-06-06 19:56               ` Ira Weiny
2022-06-07  9:58                 ` Jonathan Cameron
2022-05-31 23:43     ` Ira Weiny
2022-04-14 20:32 ` [PATCH V8 04/10] cxl/pci: Create auxiliary devices for each DOE mailbox ira.weiny
2022-04-27 17:19   ` Jonathan Cameron
2022-04-28 21:09     ` ira.weiny
2022-04-29 16:38       ` Jonathan Cameron
2022-04-29 17:01         ` Dan Williams
2022-05-03 16:14           ` Jonathan Cameron
2022-04-29 15:55   ` Jonathan Cameron
2022-04-29 17:20     ` Ira Weiny
2022-05-03 15:32       ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 05/10] cxl/pci: Create DOE auxiliary driver ira.weiny
2022-04-27 17:43   ` Jonathan Cameron
2022-04-28 14:48     ` ira.weiny
2022-04-28 15:17       ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 06/10] cxl/pci: Find the DOE mailbox which supports CDAT ira.weiny
2022-04-27 17:49   ` Jonathan Cameron
2022-05-09 21:25     ` Ira Weiny
2022-04-14 20:32 ` [PATCH V8 07/10] cxl/mem: Read CDAT table ira.weiny
2022-04-27 17:55   ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 08/10] cxl/cdat: Introduce cxl_cdat_valid() ira.weiny
2022-04-27 17:56   ` Jonathan Cameron
2022-04-14 20:32 ` [PATCH V8 09/10] cxl/mem: Retry reading CDAT on failure ira.weiny
2022-04-27 17:57   ` Jonathan Cameron
2022-04-14 20:32 ` ira.weiny [this message]
2022-04-27 18:01   ` [PATCH V8 10/10] cxl/port: Parse out DSMAS data from CDAT table Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220414203237.2198665-11-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=ben.widawsky@intel.com \
    --cc=bhelgaas@google.com \
    --cc=dan.j.williams@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).