linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: "Bjorn Helgaas" <helgaas@kernel.org>,
	"Christian Gmeiner" <christian.gmeiner@gmail.com>,
	linux-kernel@vger.kernel.org, "Tom Joseph" <tjoseph@cadence.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	linux-pci@vger.kernel.org
Subject: Re: [PATCH] PCI: cadence: respond to received PTM Requests
Date: Fri, 29 Apr 2022 11:56:27 +0100	[thread overview]
Message-ID: <20220429105627.GA28438@lpieralisi> (raw)
In-Reply-To: <116138f6-8f44-66be-c6b9-ccfbab6b8ca2@ti.com>

On Tue, Feb 22, 2022 at 07:40:54PM +0530, Kishon Vijay Abraham I wrote:
> Hi Bjorn,
> 
> On 18/02/22 6:50 pm, Bjorn Helgaas wrote:
> > On Fri, Feb 18, 2022 at 04:26:48PM +0530, Kishon Vijay Abraham I wrote:
> >> Hi Bjorn,
> >>
> >> On 01/02/22 3:35 am, Bjorn Helgaas wrote:
> >>> Update subject line to match previous conventions ("git log --oneline
> >>> drivers/pci/controller/cadence/pcie-cadence-host.c" to see).
> >>>
> >>> On Mon, Jan 31, 2022 at 01:08:27PM +0100, Christian Gmeiner wrote:
> >>>> This enables the Controller [RP] to automatically respond
> >>>> with Response/ResponseD messages.
> >>>
> > 
> >>>> +static void cdns_pcie_host_enable_ptm_response(struct cdns_pcie *pcie)
> >>>> +{
> >>>> +	u32 val;
> >>>> +
> >>>> +	val = cdns_pcie_readl(pcie, CDNS_PCIE_LM_PTM_CTRL);
> >>>> +	cdns_pcie_writel(pcie, CDNS_PCIE_LM_PTM_CTRL, val | CDNS_PCIE_LM_TPM_CTRL_PTMRSEN);
> >>>
> >>> I assume this is some device-specific enable bit that is effectively
> >>> ANDed with PCI_PTM_CTRL_ENABLE in the Precision Time Measurement
> >>> Capability?
> >>
> >> That's correct. This bit enables Controller [RP] to respond to the
> >> received PTM Requests.
> > 
> > Great!  Christian, can you update the commit log to reflect that
> > both this bit *and* PCI_PTM_CTRL_ENABLE must be set for the RP to
> > respond to received PTM Requests?
> > 
> > When CDNS_PCIE_LM_TPM_CTRL_PTMRSEN is cleared, do PCI_PTM_CAP_ROOT
> > and the PTM Responder Capable bit (for which we don't have a #define)
> > read as zero?
> 
> I see both PTM Responder Capable bit and PTM Root Capable is by-default set to '1'.

Without this patch applied and with no other SW setting
CDNS_PCIE_LM_TPM_CTRL_PTMRSEN, correct ?

> 
> root@am64xx-evm:~# devmem2 0xD000A24
> 
> 
> /dev/mem opened.
> Memory mapped at address 0xffffa8980000.
> Read at address  0x0D000A24 (0xffffa8980a24): 0x00000406
> 
> And this bit can be programmed through the local management APB
> interface if required.

Which bit ? CDNS_PCIE_LM_TPM_CTRL_PTMRSEN ?

> But with this patch which enables PTM by default for RC, it wouldn't be required
> to clear those bits.

Yes but that does not comply with the specifications as Bjorn pointed
out below.

We can merge this patch but it would be good to investigate on this
point.

Thanks,
Lorenzo

> Thanks,
> Kishon
> > 
> > I think that would be the correct behavior per PCIe r6.0, sec
> > 7.9.15.2, and it would avoid the confusion of having the PTM
> > Capability register advertise functionality that cannot be enabled via
> > the PTM Control register.
> > 
> >>>> +/* PTM Control Register */
> >>>> +#define CDNS_PCIE_LM_PTM_CTRL 	(CDNS_PCIE_LM_BASE + 0x0DA8)
> > 
> > Other #defines in this file use lower-case hex.
> > 
> > Bjorn
> > 

  reply	other threads:[~2022-04-29 10:56 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-31 12:08 [PATCH] PCI: cadence: respond to received PTM Requests Christian Gmeiner
2022-01-31 22:05 ` Bjorn Helgaas
2022-02-04 14:45   ` Christian Gmeiner
2022-02-18 10:56   ` Kishon Vijay Abraham I
2022-02-18 13:13     ` Christian Gmeiner
2022-02-18 13:20     ` Bjorn Helgaas
2022-02-18 13:42       ` Christian Gmeiner
2022-02-22 14:10       ` Kishon Vijay Abraham I
2022-04-29 10:56         ` Lorenzo Pieralisi [this message]
2022-04-29 19:28           ` Bjorn Helgaas
2022-05-05 14:43             ` Dominic Rath
2022-05-05 14:48               ` Christian Gmeiner
2022-05-11 12:37                 ` Lorenzo Pieralisi
2022-05-12  6:00                   ` Christian Gmeiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220429105627.GA28438@lpieralisi \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=christian.gmeiner@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=kishon@ti.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).