From: Carlo Pisani <carlojpisani@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: linux-pci@vger.kernel.org
Subject: Re: Oxford Semiconductor Ltd OX16PCI954 - weird dmesg
Date: Mon, 28 Oct 2019 17:37:14 +0100 [thread overview]
Message-ID: <CA+QBN9DZyFynoUt+7sS_AcC-Wio-McJKCz8-RYfDWV0jv8iCzw@mail.gmail.com> (raw)
In-Reply-To: <20191028171329.GA104845@google.com>
> > > These resources are supplied to the PCI core, probably from DT. A
> > > complete dmesg log would show more.
The rb532 does not have device tree support, so the answer is no.
I am using a common vanilla kernel without any extra patch.
> It's hard to tell what this 00:00.0 device is. The Vendor ID 0x111d
> is "Microsemi / PMC / IDT" (now owned by Microchip Technology, per
> https://pci-ids.ucw.cz/read/PC/111d).
>
> The Device ID of 0x0000 looks invalid (though that's defined by the
> vendor, and I think the PCIe spec would allow 0).
>
> The class code is invalid. Likely the device has configuration
> registers for the PCI host bridge.
> > pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
> > pci_bus 0000:00: root bus resource [io 0x18800000-0x188fffff]
> > pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
> > pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
> > pci 0000:00:00.0: [111d:0000] type 00 class 0x000000
> > pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x07ffffff pref]
> > pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
> > pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
>
> It's hard to tell what this 00:00.0 device is. The Vendor ID 0x111d
> is "Microsemi / PMC / IDT" (now owned by Microchip Technology, per
> https://pci-ids.ucw.cz/read/PC/111d).
> Can you collect the output of "lspci -vvxxx" as root?
uc-rb532 ~ # lspci -vvxxx
00:00.0 Non-VGA unclassified device: Integrated Device Technology,
Inc. Device 0000
Subsystem: Device 0214:011d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 60 (2000ns min, 14000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 140
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
00: 1d 11 00 00 57 01 a0 22 00 00 00 00 04 3c 00 00
10: 08 00 00 00 01 00 80 18 01 00 00 18 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 02 1d 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 8c 01 08 38
40: 80 80 00 00 6e 0d 00 00 00 00 00 00 51 00 00 00
50: 00 00 00 00 55 00 00 00 00 00 00 18 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S
[Rhine-III] (rev 86)
Subsystem: AST Research Inc Device 086c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 142
Region 0: I/O ports at 18800000 [size=256]
Region 1: Memory at 50014000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
00: 06 11 06 31 87 00 10 02 86 00 00 02 00 40 00 00
10: 01 00 80 18 00 40 01 50 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0d 10 6c 08
30: 00 00 00 00 40 00 00 00 00 00 00 00 8e 01 00 00
40: 01 00 82 f6 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S
[Rhine-III] (rev 86)
Subsystem: AST Research Inc Device 086c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 143
Region 0: I/O ports at 18800400 [size=256]
Region 1: Memory at 50014100 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
00: 06 11 06 31 87 00 10 02 86 00 00 02 00 40 00 00
10: 01 04 80 18 00 41 01 50 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0d 10 6c 08
30: 00 00 00 00 40 00 00 00 00 00 00 00 8f 01 00 00
40: 01 00 82 f6 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.0 Network controller: Atheros Communications Inc. Device 0029 (rev 01)
Subsystem: Atheros Communications Inc. Device 2091
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 142
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=100mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ath9k
00: 8c 16 29 00 06 00 b0 02 01 00 80 02 04 a8 00 00
10: 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 8c 16 91 20
30: 00 00 00 00 44 00 00 00 00 00 00 00 8e 01 00 00
40: 80 00 00 00 01 00 82 48 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad
16950 UART) function 0 (Uart) (rev 01) (prog-if 06 [16950])
Subsystem: Oxford Semiconductor Ltd Device 0000
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 143
Region 0: I/O ports at 18800800 [size=32]
Region 1: Memory at 50010000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 18800820 [size=32]
Region 3: Memory at 50011000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial
00: 15 14 01 95 03 00 90 02 01 06 00 07 00 00 80 00
10: 01 08 80 18 00 00 01 50 21 08 80 18 00 10 01 50
20: 00 00 00 00 00 00 00 00 00 00 00 00 15 14 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 8f 01 00 00
40: 01 00 02 6c 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.1 Non-VGA unclassified device: Oxford Semiconductor Ltd
OX16PCI954 (Quad 16950 UART) function 0 (Disabled) (rev 01)
Subsystem: Oxford Semiconductor Ltd Device 0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 143
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 15 14 00 95 00 00 90 02 01 00 00 00 00 00 80 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 15 14 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 8f 01 00 00
40: 01 00 02 6c 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad
16950 UART) function 0 (Uart) (rev 01) (prog-if 06 [16950])
Subsystem: Oxford Semiconductor Ltd Device 0000
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 140
Region 0: I/O ports at 18800840 [size=32]
Region 1: Memory at 50012000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 18800860 [size=32]
Region 3: Memory at 50013000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial
00: 15 14 01 95 03 00 90 02 01 06 00 07 00 00 80 00
10: 41 08 80 18 00 20 01 50 61 08 80 18 00 30 01 50
20: 00 00 00 00 00 00 00 00 00 00 00 00 15 14 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 8c 01 00 00
40: 01 00 02 6c 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.1 Non-VGA unclassified device: Oxford Semiconductor Ltd
OX16PCI954 (Quad 16950 UART) function 0 (Disabled) (rev 01)
Subsystem: Oxford Semiconductor Ltd Device 0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 140
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 15 14 00 95 00 00 90 02 01 00 00 00 00 00 80 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 15 14 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 8c 01 00 00
40: 01 00 02 6c 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> If those UARTs are capable of DMA, it's conceivable they could corrupt
something.
yes, it looks like something corrupts the memory.
next prev parent reply other threads:[~2019-10-28 17:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CA+QBN9C_o8HanAzXpDUN410g2o5+xfx64pbX3_VHVDKcj5N3kA@mail.gmail.com>
2019-10-28 17:13 ` Oxford Semiconductor Ltd OX16PCI954 - weird dmesg Bjorn Helgaas
2019-10-28 16:37 ` Carlo Pisani [this message]
2019-10-28 18:48 ` Bjorn Helgaas
2019-10-28 18:06 ` Carlo Pisani
2019-10-28 19:43 ` Bjorn Helgaas
2019-10-28 18:49 ` Carlo Pisani
2019-11-04 14:59 ` Bjorn Helgaas
2019-10-28 16:46 ` Carlo Pisani
[not found] <CA+QBN9D4bckEZmNhLJPBmr92St1W2GGyazLGR9kANFk2cfV8Pg@mail.gmail.com>
2019-11-04 16:30 ` Bjorn Helgaas
[not found] <CA+QBN9B4qfxpEa69TB=+MngG9bN0puwByAeGCMxk_Y7fgaKhpQ@mail.gmail.com>
2019-11-04 16:07 ` Bjorn Helgaas
[not found] <CA+QBN9AzXHifP4=F1O1jjbGP0yNxBZeTPgPJvpcKFb9Z4f30KA@mail.gmail.com>
2019-11-04 15:58 ` Bjorn Helgaas
2019-10-24 17:11 [PATCH v6 00/30] PCI: Allow BAR movement during hotplug Sergey Miroshnichenko
2019-10-24 17:11 ` [PATCH v6 01/30] PCI: Fix race condition in pci_enable/disable_device() Sergey Miroshnichenko
2019-10-25 14:33 ` Oxford Semiconductor Ltd OX16PCI954 - weird dmesg Carlo Pisani
2019-10-25 16:37 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+QBN9DZyFynoUt+7sS_AcC-Wio-McJKCz8-RYfDWV0jv8iCzw@mail.gmail.com \
--to=carlojpisani@gmail.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).