linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bharat Kumar Gogada <bharatku@xilinx.com>
To: Bharat Kumar Gogada <bharatku@xilinx.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "bhelgaas@google.com" <bhelgaas@google.com>,
	Ravikiran Gummaluri <rgummal@xilinx.com>
Subject: RE: [PATCH v5 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver
Date: Mon, 17 Feb 2020 04:54:30 +0000	[thread overview]
Message-ID: <MN2PR02MB6336CE2064A00EE9ECCCD5D1A5160@MN2PR02MB6336.namprd02.prod.outlook.com> (raw)
In-Reply-To: <1580400771-12382-3-git-send-email-bharat.kumar.gogada@xilinx.com>

Hi Bjorn,

Can you please let us know, if you have any further comments on this series ?

Regards,
Bharat

> -----Original Message-----
> From: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> Sent: Thursday, January 30, 2020 9:43 PM
> To: linux-pci@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: bhelgaas@google.com; Ravikiran Gummaluri <rgummal@xilinx.com>;
> Bharat Kumar Gogada <bharatku@xilinx.com>
> Subject: [PATCH v5 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver
> 
> - Add support for Versal CPM as Root Port.
> - The Versal ACAP devices include CCIX-PCIe Module (CPM). The integrated
>   block for CPM along with the integrated bridge can function
>   as PCIe Root Port.
> - CPM Versal uses GICv3 ITS feature for achieving assigning MSI/MSI-X
>   vectors and handling MSI/MSI-X interrupts.
> - Bridge error and legacy interrupts in Versal CPM are handled using
>   Versal CPM specific MISC interrupt line.
> 
> Changes v5:
> - Removed xilinx_cpm_pcie_valid_device function
> 
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> ---
>  drivers/pci/controller/Kconfig           |   8 +
>  drivers/pci/controller/Makefile          |   1 +
>  drivers/pci/controller/pcie-xilinx-cpm.c | 491
> +++++++++++++++++++++++++++++++
>  3 files changed, 500 insertions(+)
>  create mode 100644 drivers/pci/controller/pcie-xilinx-cpm.c
> 
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index
> c77069c..362f4db 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -81,6 +81,14 @@ config PCIE_XILINX
>  	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
>  	  Host Bridge driver.
> 
> +config PCIE_XILINX_CPM
> +	bool "Xilinx Versal CPM host bridge support"
> +	depends on ARCH_ZYNQMP || COMPILE_TEST
> +	help
> +	  Say 'Y' here if you want kernel support for the
> +	  Xilinx Versal CPM host bridge. The driver supports
> +	  MSI/MSI-X interrupts using GICv3 ITS feature.
> +
>  config PCI_XGENE
>  	bool "X-Gene PCIe controller"
>  	depends on ARM64 || COMPILE_TEST
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index 3d4f597..6c936e9 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-
> common.o
>  obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
>  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
>  obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
> +obj-$(CONFIG_PCIE_XILINX_CPM) += pcie-xilinx-cpm.o
>  obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
>  obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
>  obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o diff --git
> a/drivers/pci/controller/pcie-xilinx-cpm.c b/drivers/pci/controller/pcie-xilinx-
> cpm.c
> new file mode 100644
> index 0000000..4e4c0f0
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-xilinx-cpm.c
> @@ -0,0 +1,491 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for Xilinx Versal CPM DMA Bridge
> + *
> + * (C) Copyright 2019 - 2020, Xilinx, Inc.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +#include "../pci.h"
> +
> +/* Register definitions */
> +#define XILINX_CPM_PCIE_REG_IDR		0x00000E10
> +#define XILINX_CPM_PCIE_REG_IMR		0x00000E14
> +#define XILINX_CPM_PCIE_REG_PSCR	0x00000E1C
> +#define XILINX_CPM_PCIE_REG_RPSC	0x00000E20
> +#define XILINX_CPM_PCIE_REG_RPEFR	0x00000E2C
> +#define XILINX_CPM_PCIE_REG_IDRN	0x00000E38
> +#define XILINX_CPM_PCIE_REG_IDRN_MASK	0x00000E3C
> +#define XILINX_CPM_PCIE_MISC_IR_STATUS	0x00000340
> +#define XILINX_CPM_PCIE_MISC_IR_ENABLE	0x00000348
> +#define XILINX_CPM_PCIE_MISC_IR_LOCAL	BIT(1)
> +
> +/* Interrupt registers definitions */
> +#define XILINX_CPM_PCIE_INTR_LINK_DOWN		BIT(0)
> +#define XILINX_CPM_PCIE_INTR_HOT_RESET		BIT(3)
> +#define XILINX_CPM_PCIE_INTR_CFG_TIMEOUT	BIT(8)
> +#define XILINX_CPM_PCIE_INTR_CORRECTABLE	BIT(9)
> +#define XILINX_CPM_PCIE_INTR_NONFATAL		BIT(10)
> +#define XILINX_CPM_PCIE_INTR_FATAL		BIT(11)
> +#define XILINX_CPM_PCIE_INTR_INTX		BIT(16)
> +#define XILINX_CPM_PCIE_INTR_MSI		BIT(17)
> +#define XILINX_CPM_PCIE_INTR_SLV_UNSUPP		BIT(20)
> +#define XILINX_CPM_PCIE_INTR_SLV_UNEXP		BIT(21)
> +#define XILINX_CPM_PCIE_INTR_SLV_COMPL		BIT(22)
> +#define XILINX_CPM_PCIE_INTR_SLV_ERRP		BIT(23)
> +#define XILINX_CPM_PCIE_INTR_SLV_CMPABT		BIT(24)
> +#define XILINX_CPM_PCIE_INTR_SLV_ILLBUR		BIT(25)
> +#define XILINX_CPM_PCIE_INTR_MST_DECERR		BIT(26)
> +#define XILINX_CPM_PCIE_INTR_MST_SLVERR		BIT(27)
> +#define XILINX_CPM_PCIE_IMR_ALL_MASK		0x1FF39FF9
> +#define XILINX_CPM_PCIE_IDR_ALL_MASK		0xFFFFFFFF
> +#define XILINX_CPM_PCIE_IDRN_MASK		GENMASK(19, 16)
> +#define XILINX_CPM_PCIE_INTR_CFG_PCIE_TIMEOUT	BIT(4)
> +#define XILINX_CPM_PCIE_INTR_CFG_ERR_POISON	BIT(12)
> +#define XILINX_CPM_PCIE_INTR_PME_TO_ACK_RCVD	BIT(15)
> +#define XILINX_CPM_PCIE_INTR_PM_PME_RCVD	BIT(17)
> +#define XILINX_CPM_PCIE_INTR_SLV_PCIE_TIMEOUT	BIT(28)
> +#define XILINX_CPM_PCIE_IDRN_SHIFT		16
> +
> +/* Root Port Error FIFO Read Register definitions */
> +#define XILINX_CPM_PCIE_RPEFR_ERR_VALID		BIT(18)
> +#define XILINX_CPM_PCIE_RPEFR_REQ_ID		GENMASK(15, 0)
> +#define XILINX_CPM_PCIE_RPEFR_ALL_MASK		0xFFFFFFFF
> +
> +/* Root Port Status/control Register definitions */
> +#define XILINX_CPM_PCIE_REG_RPSC_BEN		BIT(0)
> +
> +/* Phy Status/Control Register definitions */
> +#define XILINX_CPM_PCIE_REG_PSCR_LNKUP		BIT(11)
> +
> +/* ECAM definitions */
> +#define ECAM_BUS_NUM_SHIFT		20
> +#define ECAM_DEV_NUM_SHIFT		12
> +
> +/**
> + * struct xilinx_cpm_pcie_port - PCIe port information
> + * @reg_base: Bridge Register Base
> + * @cpm_base: CPM System Level Control and Status Register(SLCR) Base
> + * @irq: Interrupt number
> + * @root_busno: Root Bus number
> + * @dev: Device pointer
> + * @leg_domain: Legacy IRQ domain pointer
> + * @irq_misc: Legacy and error interrupt number  */ struct
> +xilinx_cpm_pcie_port {
> +	void __iomem *reg_base;
> +	void __iomem *cpm_base;
> +	u32 irq;
> +	u8 root_busno;
> +	struct device *dev;
> +	struct irq_domain *leg_domain;
> +	int irq_misc;
> +};
> +
> +static inline u32 pcie_read(struct xilinx_cpm_pcie_port *port, u32 reg)
> +{
> +	return readl(port->reg_base + reg);
> +}
> +
> +static inline void pcie_write(struct xilinx_cpm_pcie_port *port,
> +			      u32 val, u32 reg)
> +{
> +	writel(val, port->reg_base + reg);
> +}
> +
> +static inline bool cpm_pcie_link_up(struct xilinx_cpm_pcie_port *port)
> +{
> +	return (pcie_read(port, XILINX_CPM_PCIE_REG_PSCR) &
> +		XILINX_CPM_PCIE_REG_PSCR_LNKUP) ? 1 : 0; }
> +
> +/**
> + * xilinx_cpm_pcie_clear_err_interrupts - Clear Error Interrupts
> + * @port: PCIe port information
> + */
> +static void cpm_pcie_clear_err_interrupts(struct xilinx_cpm_pcie_port
> +*port) {
> +	unsigned long val = pcie_read(port, XILINX_CPM_PCIE_REG_RPEFR);
> +
> +	if (val & XILINX_CPM_PCIE_RPEFR_ERR_VALID) {
> +		dev_dbg(port->dev, "Requester ID %lu\n",
> +			val & XILINX_CPM_PCIE_RPEFR_REQ_ID);
> +		pcie_write(port, XILINX_CPM_PCIE_RPEFR_ALL_MASK,
> +			   XILINX_CPM_PCIE_REG_RPEFR);
> +	}
> +}
> +
> +/**
> + * xilinx_cpm_pcie_map_bus - Get configuration base
> + * @bus: PCI Bus structure
> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *	   accessed.
> + */
> +static void __iomem *xilinx_cpm_pcie_map_bus(struct pci_bus *bus,
> +					     unsigned int devfn, int where) {
> +	struct xilinx_cpm_pcie_port *port = bus->sysdata;
> +	int relbus;
> +
> +	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> +		 (devfn << ECAM_DEV_NUM_SHIFT);
> +
> +	return port->reg_base + relbus + where; }
> +
> +/* PCIe operations */
> +static struct pci_ops xilinx_cpm_pcie_ops = {
> +	.map_bus = xilinx_cpm_pcie_map_bus,
> +	.read	= pci_generic_config_read,
> +	.write	= pci_generic_config_write,
> +};
> +
> +/**
> + * xilinx_cpm_pcie_intx_map - Set the handler for the INTx and mark IRQ
> +as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int xilinx_cpm_pcie_intx_map(struct irq_domain *domain,
> +				    unsigned int irq, irq_hw_number_t hwirq) {
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +	irq_set_status_flags(irq, IRQ_LEVEL);
> +
> +	return 0;
> +}
> +
> +/* INTx IRQ Domain operations */
> +static const struct irq_domain_ops intx_domain_ops = {
> +	.map = xilinx_cpm_pcie_intx_map,
> +	.xlate = pci_irqd_intx_xlate,
> +};
> +
> +/**
> + * xilinx_cpm_pcie_intr_handler - Interrupt Service Handler
> + * @irq: IRQ number
> + * @data: PCIe port information
> + *
> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure  */ static
> +irqreturn_t xilinx_cpm_pcie_intr_handler(int irq, void *data) {
> +	struct xilinx_cpm_pcie_port *port = data;
> +	struct device *dev = port->dev;
> +	u32 val, mask, status, bit;
> +	unsigned long intr_val;
> +
> +	/* Read interrupt decode and mask registers */
> +	val = pcie_read(port, XILINX_CPM_PCIE_REG_IDR);
> +	mask = pcie_read(port, XILINX_CPM_PCIE_REG_IMR);
> +
> +	status = val & mask;
> +	if (!status)
> +		return IRQ_NONE;
> +
> +	if (status & XILINX_CPM_PCIE_INTR_LINK_DOWN)
> +		dev_warn(dev, "Link Down\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_HOT_RESET)
> +		dev_info(dev, "Hot reset\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_CFG_TIMEOUT)
> +		dev_warn(dev, "ECAM access timeout\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_CORRECTABLE) {
> +		dev_warn(dev, "Correctable error message\n");
> +		cpm_pcie_clear_err_interrupts(port);
> +	}
> +
> +	if (status & XILINX_CPM_PCIE_INTR_NONFATAL) {
> +		dev_warn(dev, "Non fatal error message\n");
> +		cpm_pcie_clear_err_interrupts(port);
> +	}
> +
> +	if (status & XILINX_CPM_PCIE_INTR_FATAL) {
> +		dev_warn(dev, "Fatal error message\n");
> +		cpm_pcie_clear_err_interrupts(port);
> +	}
> +
> +	if (status & XILINX_CPM_PCIE_INTR_INTX) {
> +		/* Handle INTx Interrupt */
> +		intr_val = pcie_read(port, XILINX_CPM_PCIE_REG_IDRN);
> +		intr_val = intr_val >> XILINX_CPM_PCIE_IDRN_SHIFT;
> +
> +		for_each_set_bit(bit, &intr_val, PCI_NUM_INTX)
> +			generic_handle_irq(irq_find_mapping(port-
> >leg_domain,
> +							    bit));
> +	}
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_UNSUPP)
> +		dev_warn(dev, "Slave unsupported request\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_UNEXP)
> +		dev_warn(dev, "Slave unexpected completion\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_COMPL)
> +		dev_warn(dev, "Slave completion timeout\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_ERRP)
> +		dev_warn(dev, "Slave Error Poison\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_CMPABT)
> +		dev_warn(dev, "Slave Completer Abort\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_ILLBUR)
> +		dev_warn(dev, "Slave Illegal Burst\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_MST_DECERR)
> +		dev_warn(dev, "Master decode error\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_MST_SLVERR)
> +		dev_warn(dev, "Master slave error\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_CFG_PCIE_TIMEOUT)
> +		dev_warn(dev, "PCIe ECAM access timeout\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_CFG_ERR_POISON)
> +		dev_warn(dev, "ECAM poisoned completion received\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_PME_TO_ACK_RCVD)
> +		dev_warn(dev, "PME_TO_ACK message received\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_PM_PME_RCVD)
> +		dev_warn(dev, "PM_PME message received\n");
> +
> +	if (status & XILINX_CPM_PCIE_INTR_SLV_PCIE_TIMEOUT)
> +		dev_warn(dev, "PCIe completion timeout received\n");
> +
> +	/* Clear the Interrupt Decode register */
> +	pcie_write(port, status, XILINX_CPM_PCIE_REG_IDR);
> +
> +	/*
> +	 * XILINX_CPM_PCIE_MISC_IR_STATUS register is mapped to
> +	 * CPM SLCR block.
> +	 */
> +	val = readl(port->cpm_base + XILINX_CPM_PCIE_MISC_IR_STATUS);
> +	if (val)
> +		writel(val, port->cpm_base +
> XILINX_CPM_PCIE_MISC_IR_STATUS);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/**
> + * xilinx_cpm_pcie_init_irq_domain - Initialize IRQ domain
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure  */ static int
> +xilinx_cpm_pcie_init_irq_domain(struct xilinx_cpm_pcie_port *port) {
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct device_node *pcie_intc_node;
> +
> +	/* Setup INTx */
> +	pcie_intc_node = of_get_next_child(node, NULL);
> +	if (!pcie_intc_node) {
> +		dev_err(dev, "No PCIe Intc node found\n");
> +		return -EINVAL;
> +	}
> +
> +	port->leg_domain = irq_domain_add_linear(pcie_intc_node,
> PCI_NUM_INTX,
> +						 &intx_domain_ops,
> +						 port);
> +	if (!port->leg_domain) {
> +		dev_err(dev, "Failed to get a INTx IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * xilinx_cpm_pcie_init_port - Initialize hardware
> + * @port: PCIe port information
> + */
> +static void xilinx_cpm_pcie_init_port(struct xilinx_cpm_pcie_port
> +*port) {
> +	if (cpm_pcie_link_up(port))
> +		dev_info(port->dev, "PCIe Link is UP\n");
> +	else
> +		dev_info(port->dev, "PCIe Link is DOWN\n");
> +
> +	/* Disable all interrupts */
> +	pcie_write(port, ~XILINX_CPM_PCIE_IDR_ALL_MASK,
> +		   XILINX_CPM_PCIE_REG_IMR);
> +
> +	/* Clear pending interrupts */
> +	pcie_write(port, pcie_read(port, XILINX_CPM_PCIE_REG_IDR) &
> +		   XILINX_CPM_PCIE_IMR_ALL_MASK,
> +		   XILINX_CPM_PCIE_REG_IDR);
> +
> +	/* Enable all interrupts */
> +	pcie_write(port, XILINX_CPM_PCIE_IMR_ALL_MASK,
> +		   XILINX_CPM_PCIE_REG_IMR);
> +	pcie_write(port, XILINX_CPM_PCIE_IDRN_MASK,
> +		   XILINX_CPM_PCIE_REG_IDRN_MASK);
> +
> +	/*
> +	 * XILINX_CPM_PCIE_MISC_IR_ENABLE register is mapped to
> +	 * CPM SLCR block.
> +	 */
> +	writel(XILINX_CPM_PCIE_MISC_IR_LOCAL,
> +	       port->cpm_base + XILINX_CPM_PCIE_MISC_IR_ENABLE);
> +	/* Enable the Bridge enable bit */
> +	pcie_write(port, pcie_read(port, XILINX_CPM_PCIE_REG_RPSC) |
> +		   XILINX_CPM_PCIE_REG_RPSC_BEN,
> +		   XILINX_CPM_PCIE_REG_RPSC);
> +}
> +
> +static int xilinx_cpm_request_misc_irq(struct xilinx_cpm_pcie_port
> +*port) {
> +	struct device *dev = port->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	int err;
> +
> +	port->irq_misc = platform_get_irq_byname(pdev, "misc");
> +	if (port->irq_misc <= 0) {
> +		dev_err(dev, "Unable to find misc IRQ line\n");
> +		return port->irq_misc;
> +	}
> +	err = devm_request_irq(dev, port->irq_misc,
> +			       xilinx_cpm_pcie_intr_handler,
> +			       IRQF_SHARED | IRQF_NO_THREAD,
> +			       "xilinx-pcie", port);
> +	if (err) {
> +		dev_err(dev, "unable to request misc IRQ line %d\n",
> +			port->irq_misc);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * xilinx_cpm_pcie_parse_dt - Parse Device tree
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure  */ static int
> +xilinx_cpm_pcie_parse_dt(struct xilinx_cpm_pcie_port *port) {
> +	struct device *dev = port->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct resource *res;
> +	int err;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> +	port->reg_base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(port->reg_base))
> +		return PTR_ERR(port->reg_base);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +					   "cpm_slcr");
> +	port->cpm_base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(port->cpm_base))
> +		return PTR_ERR(port->cpm_base);
> +
> +	err = xilinx_cpm_request_misc_irq(port);
> +	if (err)
> +		return err;
> +
> +	return 0;
> +}
> +
> +/**
> + * xilinx_cpm_pcie_probe - Probe function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' on success and error value on failure  */ static int
> +xilinx_cpm_pcie_probe(struct platform_device *pdev) {
> +	struct xilinx_cpm_pcie_port *port;
> +	struct device *dev = &pdev->dev;
> +	struct pci_bus *bus;
> +	struct pci_bus *child;
> +	struct pci_host_bridge *bridge;
> +	int err;
> +
> +	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> +	if (!bridge)
> +		return -ENODEV;
> +
> +	port = pci_host_bridge_priv(bridge);
> +
> +	port->dev = dev;
> +
> +	err = xilinx_cpm_pcie_parse_dt(port);
> +	if (err) {
> +		dev_err(dev, "Parsing DT failed\n");
> +		return err;
> +	}
> +
> +	xilinx_cpm_pcie_init_port(port);
> +
> +	err = xilinx_cpm_pcie_init_irq_domain(port);
> +	if (err) {
> +		dev_err(dev, "Failed creating IRQ Domain\n");
> +		return err;
> +	}
> +
> +	err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
> +					      &bridge->dma_ranges, NULL);
> +	if (err) {
> +		dev_err(dev, "Getting bridge resources failed\n");
> +		return err;
> +	}
> +
> +	bridge->dev.parent = dev;
> +	bridge->sysdata = port;
> +	bridge->busnr = port->root_busno;
> +	bridge->ops = &xilinx_cpm_pcie_ops;
> +	bridge->map_irq = of_irq_parse_and_map_pci;
> +	bridge->swizzle_irq = pci_common_swizzle;
> +
> +	err = pci_scan_root_bus_bridge(bridge);
> +	if (err)
> +		return err;
> +
> +	bus = bridge->bus;
> +
> +	pci_assign_unassigned_bus_resources(bus);
> +	list_for_each_entry(child, &bus->children, node)
> +		pcie_bus_configure_settings(child);
> +	pci_bus_add_devices(bus);
> +	return 0;
> +}
> +
> +static const struct of_device_id xilinx_cpm_pcie_of_match[] = {
> +	{ .compatible = "xlnx,versal-cpm-host-1.00", },
> +	{}
> +};
> +
> +static struct platform_driver xilinx_cpm_pcie_driver = {
> +	.driver = {
> +		.name = "xilinx-cpm-pcie",
> +		.of_match_table = xilinx_cpm_pcie_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = xilinx_cpm_pcie_probe,
> +};
> +
> +builtin_platform_driver(xilinx_cpm_pcie_driver);
> --
> 2.7.4


  reply	other threads:[~2020-02-17  4:56 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30 16:12 [PATCH v5 0/2] Adding support for Versal CPM as Root Port driver Bharat Kumar Gogada
2020-01-30 16:12 ` [PATCH v5 1/2] PCI: xilinx-cpm: Add device tree binding for Versal CPM host bridge Bharat Kumar Gogada
2020-01-30 16:12 ` [PATCH v5 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver Bharat Kumar Gogada
2020-02-17  4:54   ` Bharat Kumar Gogada [this message]
2020-02-17 23:55   ` Bjorn Helgaas
2020-02-24  9:14     ` Bharat Kumar Gogada
2020-02-25 11:30   ` Lorenzo Pieralisi
2020-02-25 11:40   ` Lorenzo Pieralisi
2020-02-25 14:39     ` Bharat Kumar Gogada
2020-02-28 10:44       ` Lorenzo Pieralisi
2020-02-28 12:48         ` Bharat Kumar Gogada
2020-03-06 11:16           ` Lorenzo Pieralisi
2020-03-06 11:45             ` Bharat Kumar Gogada
2020-03-06 15:12               ` Lorenzo Pieralisi
2020-03-09 11:27                 ` Bharat Kumar Gogada
2020-03-16  5:24         ` Bharat Kumar Gogada
2020-03-30  9:37           ` Bharat Kumar Gogada
2020-04-16  7:07             ` Bharat Kumar Gogada
2020-04-20  8:52               ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MN2PR02MB6336CE2064A00EE9ECCCD5D1A5160@MN2PR02MB6336.namprd02.prod.outlook.com \
    --to=bharatku@xilinx.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rgummal@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).