linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Krzysztof Wilczyński" <kw@linux.com>
To: Arnd Bergmann <arnd@arndb.de>
Cc: "Bjorn Helgaas" <helgaas@kernel.org>,
	"Jens Axboe" <axboe@kernel.dk>,
	"Darren Stevens" <darren@stevens-zone.net>,
	"mad skateman" <madskateman@gmail.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"Damien Le Moal" <damien.lemoal@opensource.wdc.com>,
	"Olof Johansson" <olof@lixom.net>,
	"R.T.Dickinson" <rtd2@xtra.co.nz>,
	"Christian Zigotzky" <chzigotzky@xenosoft.de>,
	"bhelgaas@google.com >> Bjorn Helgaas" <bhelgaas@google.com>,
	"Matthew Leaman" <matthew@a-eon.biz>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	"Christian Zigotzky" <info@xenosoft.de>,
	"Robert Święcki" <robert@swiecki.net>
Subject: Re: [PASEMI] Nemo board doesn't recognize any ATA disks with the pci-v5.16 updates
Date: Wed, 10 Nov 2021 00:18:48 +0100	[thread overview]
Message-ID: <YYsB2DAtZjtNFVhZ@rocinante> (raw)
In-Reply-To: <CAK8P3a3fB7KmqWcaenn04WMps=jucV8wOZs=AZcNFHR+o+Bvyg@mail.gmail.com>

[+CC Adding Robert for visibility]

Hi Arnd,

Thank you looking at this!  Much appreciated.

> > > You could attach the kernel config there, too, since it didn't make it
> > > to the mailing list (vger may discard them -- see
> > > http://vger.kernel.org/majordomo-info.html).
> >
> > Bjorn and I looked at which commits that went with a recent Pull Request
> > from us might be causing this, but we are a little bit at loss, and were
> > hoping that you could give us a hand in troubleshooting this.
> 
> For reference, these are the patches in that branch that touch any
> interesting files,
> as most of the contents are for pci-controller drivers that are not used on
> powerpc at all:
> 
> $ git log --no-merges --oneline 512b7931ad05..dda4b381f05d
> arch/powerpc/ drivers/of/  drivers/pci/*.[ch]  include/linux/
> acd61ffb2f16 PCI: Add ACS quirk for Pericom PI7C9X2G switches
> 978fd0056e19 PCI: of: Allow matching of an interrupt-map local to a PCI device
> 041284181226 of/irq: Allow matching of an interrupt-map local to an
> interrupt controller
> 0ab8d0f6ae3f irqdomain: Make of_phandle_args_to_fwspec() generally available
> 5ec0a6fcb60e PCI: Do not enable AtomicOps on VFs
> 7a41ae80bdcb PCI: pci-bridge-emul: Fix emulation of W1C bits
> fd1ae23b495b PCI: Prefer 'unsigned int' over bare 'unsigned'
> ff5d3bb6e16d PCI: Remove redundant 'rc' initialization
> 3331325c6347 PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size()
> e1b0d0bb2032 PCI: Re-enable Downstream Port LTR after reset or hotplug
> ac8e3cef588c PCI/sysfs: Explicitly show first MSI IRQ for 'irq'
> 88dee3b0efe4 PCI: Remove unused pci_pool wrappers
> b5f9c644eb1b PCI: Remove struct pci_dev->driver
> 2a4d9408c9e8 PCI: Use to_pci_driver() instead of pci_dev->driver
> 4141127c44a9 powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver
> f9a6c8ad4922 PCI/ERR: Reduce compile time for CONFIG_PCIEAER=n
> 43e85554d4ed xen/pcifront: Use to_pci_driver() instead of pci_dev->driver
> 34ab316d7287 xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv
> 9f37ab0412eb PCI/switchtec: Add check of event support
> 5a72431ec318 powerpc/eeh: Use dev_driver_string() instead of struct
> pci_dev->driver->name
> ae232f0970ea PCI: Drop pci_device_probe() test of !pci_dev->driver
> 097d9d414433 PCI: Drop pci_device_remove() test of pci_dev->driver
> 8e9028b3790d PCI: Return NULL for to_pci_driver(NULL)
> 357df2fc0066 PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()
> bf2928c7a284 PCI/VPD: Add pci_read/write_vpd_any()
> b2105b9f39b5 PCI: Correct misspelled and remove duplicated words
> 7c3855c423b1 PCI: Coalesce host bridge contiguous apertures
> e0f7b1922358 PCI: Use kstrtobool() directly, sans strtobool() wrapper
> 36f354ec7bf9 PCI/sysfs: Return -EINVAL consistently from "store" functions
> 95e83e219d68 PCI/sysfs: Check CAP_SYS_ADMIN before parsing user input
> af9d82626c8f PCI/ACPI: Remove OSC_PCI_SUPPORT_MASKS and OSC_PCI_CONTROL_MASKS
> 9a0a1417d3bb PCI: Tidy comments
> 06dc660e6eb8 PCI: Rename pcibios_add_device() to pcibios_device_add()
> e3f4bd3462f6 PCI: Mark Atheros QCA6174 to avoid bus reset
> 3a19407913e8 PCI/P2PDMA: Apply bus offset correctly in DMA address calculation
> 
> Out of these, I agree that most of them seem harmless, these would
> be the ones I'd try to look at more closely, or maybe revert for testing:
> 
> 978fd0056e19 PCI: of: Allow matching of an interrupt-map local to a PCI device
> 041284181226 of/irq: Allow matching of an interrupt-map local to an
> interrupt controller
> e1b0d0bb2032 PCI: Re-enable Downstream Port LTR after reset or hotplug
> 7c3855c423b1 PCI: Coalesce host bridge contiguous apertures
> 3a19407913e8 PCI/P2PDMA: Apply bus offset correctly in DMA address calculation

Robert would you be able build a kernel without the patches Arnd singled
out as potential curlprits?  Might be expidite some troubleshooting saving
a lot of time doing bisect.

I wonder if this will help you with the following problem:
  https://lore.kernel.org/linux-pci/CAP145pjO9zdGgutHP=of0H+L1=nSz097zf73i7ZYm2-NWuwHhQ@mail.gmail.com/

	Krzysztof

  reply	other threads:[~2021-11-09 23:18 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de>
     [not found] ` <15731ad7-83ff-c7ef-e4a1-8b11814572c2@xenosoft.de>
     [not found]   ` <17e37b22-5839-0e3a-0dbf-9c676adb0dec@xenosoft.de>
     [not found]     ` <3b210c92-4be6-ce49-7512-bb194475eeab@xenosoft.de>
2021-11-09 15:10       ` [PASEMI] Nemo board doesn't recognize any ATA disks with the pci-v5.16 updates Christian Zigotzky
2021-11-09 16:58         ` Bjorn Helgaas
2021-11-09 22:40           ` Krzysztof Wilczyński
2021-11-09 23:05             ` Arnd Bergmann
2021-11-09 23:18               ` Krzysztof Wilczyński [this message]
2021-11-10 16:42                 ` Robert Święcki
2021-11-10  3:52             ` Damien Le Moal
2021-11-10 18:07       ` Christian Zigotzky
2021-11-10 18:41         ` Bjorn Helgaas
2021-11-10 19:09           ` Marc Zyngier
2021-11-11  5:24             ` Christian Zigotzky
2021-11-11  7:13               ` Marc Zyngier
2021-11-11  7:47                 ` Christian Zigotzky
2021-11-11 10:20                   ` Marc Zyngier
2021-11-11 10:44                     ` Christian Zigotzky
2021-11-11 11:24                       ` Marc Zyngier
2021-11-11 11:54                         ` Christian Zigotzky
2021-11-11 22:21                     ` Olof Johansson
2021-11-12 11:49                       ` Segher Boessenkool
2021-11-11 17:39         ` Marc Zyngier
2021-11-12  9:40           ` Christian Zigotzky
2021-11-12 10:11             ` Christian Zigotzky
2021-11-12 11:00               ` Christian Zigotzky
2021-11-12 13:41             ` Marc Zyngier
2021-11-12 14:15               ` Christian Zigotzky
2021-11-12 14:46                 ` Marc Zyngier
2021-11-12 15:01                   ` Christian Zigotzky
2021-11-12 15:05                     ` Christian Zigotzky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YYsB2DAtZjtNFVhZ@rocinante \
    --to=kw@linux.com \
    --cc=arnd@arndb.de \
    --cc=axboe@kernel.dk \
    --cc=bhelgaas@google.com \
    --cc=chzigotzky@xenosoft.de \
    --cc=damien.lemoal@opensource.wdc.com \
    --cc=darren@stevens-zone.net \
    --cc=helgaas@kernel.org \
    --cc=info@xenosoft.de \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=madskateman@gmail.com \
    --cc=matthew@a-eon.biz \
    --cc=olof@lixom.net \
    --cc=robert@swiecki.net \
    --cc=rtd2@xtra.co.nz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).