From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: James Clark <james.clark@arm.com>,
coresight@lists.linaro.org, leo.yan@linaro.org, al.grant@arm.com,
suzuki.poulose@arm.com, anshuman.khandual@arm.com,
mike.leach@linaro.org, Mark Rutland <mark.rutland@arm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Jiri Olsa <jolsa@redhat.com>, Namhyung Kim <namhyung@kernel.org>,
John Garry <john.garry@huawei.com>, Will Deacon <will@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-perf-users@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 6/6] perf cs-etm: Pass unformatted flag to decoder
Date: Thu, 22 Jul 2021 18:00:44 -0300 [thread overview]
Message-ID: <YPncfIyzvzj4v/rx@kernel.org> (raw)
In-Reply-To: <20210721160523.GA2377909@p14s>
Em Wed, Jul 21, 2021 at 10:05:23AM -0600, Mathieu Poirier escreveu:
> On Wed, Jul 21, 2021 at 04:02:02PM +0100, James Clark wrote:
> > The TRBE (Trace Buffer Extension) feature allows a separate trace buffer
> > for each trace source, therefore the trace wouldn't need to be
> > formatted. The driver was introduced in commit 3fbf7f011f24
> > ("coresight: sink: Add TRBE driver").
> >
> > The formatted/unformatted mode is encoded in one of the flags of the
> > AUX record. The first AUX record encountered for each event is used to
> > determine the mode, and this will persist for the remaining trace that
> > is either decoded or dumped.
> >
> > Signed-off-by: James Clark <james.clark@arm.com>
> > ---
> > .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 4 +-
> > tools/perf/util/cs-etm.c | 53 ++++++++++++++-----
> > 2 files changed, 42 insertions(+), 15 deletions(-)
> >
>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>
> Arnaldo, please consider adding this set to your tree.
Thanks, applied to perf/core.
- Arnaldo
> Thanks,
> Mathieu
>
> > diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
> > index ed1f0326f859..9c9039ae6989 100644
> > --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
> > +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
> > @@ -687,7 +687,7 @@ cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params,
> > }
> >
> > struct cs_etm_decoder *
> > -cs_etm_decoder__new(int num_cpu, struct cs_etm_decoder_params *d_params,
> > +cs_etm_decoder__new(int decoders, struct cs_etm_decoder_params *d_params,
> > struct cs_etm_trace_params t_params[])
> > {
> > struct cs_etm_decoder *decoder;
> > @@ -732,7 +732,7 @@ cs_etm_decoder__new(int num_cpu, struct cs_etm_decoder_params *d_params,
> > /* init raw frame logging if required */
> > cs_etm_decoder__init_raw_frame_logging(d_params, decoder);
> >
> > - for (i = 0; i < num_cpu; i++) {
> > + for (i = 0; i < decoders; i++) {
> > ret = cs_etm_decoder__create_etm_decoder(d_params,
> > &t_params[i],
> > decoder);
> > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> > index 760050ea936d..f4b2bff533f3 100644
> > --- a/tools/perf/util/cs-etm.c
> > +++ b/tools/perf/util/cs-etm.c
> > @@ -461,13 +461,14 @@ static void cs_etm__set_trace_param_etmv4(struct cs_etm_trace_params *t_params,
> > }
> >
> > static int cs_etm__init_trace_params(struct cs_etm_trace_params *t_params,
> > - struct cs_etm_auxtrace *etm)
> > + struct cs_etm_auxtrace *etm,
> > + int decoders)
> > {
> > int i;
> > u32 etmidr;
> > u64 architecture;
> >
> > - for (i = 0; i < etm->num_cpu; i++) {
> > + for (i = 0; i < decoders; i++) {
> > architecture = etm->metadata[i][CS_ETM_MAGIC];
> >
> > switch (architecture) {
> > @@ -488,7 +489,8 @@ static int cs_etm__init_trace_params(struct cs_etm_trace_params *t_params,
> >
> > static int cs_etm__init_decoder_params(struct cs_etm_decoder_params *d_params,
> > struct cs_etm_queue *etmq,
> > - enum cs_etm_decoder_operation mode)
> > + enum cs_etm_decoder_operation mode,
> > + bool formatted)
> > {
> > int ret = -EINVAL;
> >
> > @@ -498,7 +500,7 @@ static int cs_etm__init_decoder_params(struct cs_etm_decoder_params *d_params,
> > d_params->packet_printer = cs_etm__packet_dump;
> > d_params->operation = mode;
> > d_params->data = etmq;
> > - d_params->formatted = true;
> > + d_params->formatted = formatted;
> > d_params->fsyncs = false;
> > d_params->hsyncs = false;
> > d_params->frame_aligned = true;
> > @@ -720,11 +722,17 @@ static u32 cs_etm__mem_access(struct cs_etm_queue *etmq, u8 trace_chan_id,
> > return len;
> > }
> >
> > -static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm)
> > +static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm,
> > + bool formatted)
> > {
> > struct cs_etm_decoder_params d_params;
> > struct cs_etm_trace_params *t_params = NULL;
> > struct cs_etm_queue *etmq;
> > + /*
> > + * Each queue can only contain data from one CPU when unformatted, so only one decoder is
> > + * needed.
> > + */
> > + int decoders = formatted ? etm->num_cpu : 1;
> >
> > etmq = zalloc(sizeof(*etmq));
> > if (!etmq)
> > @@ -735,21 +743,23 @@ static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm)
> > goto out_free;
> >
> > /* Use metadata to fill in trace parameters for trace decoder */
> > - t_params = zalloc(sizeof(*t_params) * etm->num_cpu);
> > + t_params = zalloc(sizeof(*t_params) * decoders);
> >
> > if (!t_params)
> > goto out_free;
> >
> > - if (cs_etm__init_trace_params(t_params, etm))
> > + if (cs_etm__init_trace_params(t_params, etm, decoders))
> > goto out_free;
> >
> > /* Set decoder parameters to decode trace packets */
> > if (cs_etm__init_decoder_params(&d_params, etmq,
> > dump_trace ? CS_ETM_OPERATION_PRINT :
> > - CS_ETM_OPERATION_DECODE))
> > + CS_ETM_OPERATION_DECODE,
> > + formatted))
> > goto out_free;
> >
> > - etmq->decoder = cs_etm_decoder__new(etm->num_cpu, &d_params, t_params);
> > + etmq->decoder = cs_etm_decoder__new(decoders, &d_params,
> > + t_params);
> >
> > if (!etmq->decoder)
> > goto out_free;
> > @@ -777,14 +787,15 @@ static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm)
> >
> > static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm,
> > struct auxtrace_queue *queue,
> > - unsigned int queue_nr)
> > + unsigned int queue_nr,
> > + bool formatted)
> > {
> > struct cs_etm_queue *etmq = queue->priv;
> >
> > if (list_empty(&queue->head) || etmq)
> > return 0;
> >
> > - etmq = cs_etm__alloc_queue(etm);
> > + etmq = cs_etm__alloc_queue(etm, formatted);
> >
> > if (!etmq)
> > return -ENOMEM;
> > @@ -2430,8 +2441,14 @@ static int cs_etm__process_auxtrace_event(struct perf_session *session,
> > if (err)
> > return err;
> >
> > + /*
> > + * Knowing if the trace is formatted or not requires a lookup of
> > + * the aux record so only works in non-piped mode where data is
> > + * queued in cs_etm__queue_aux_records(). Always assume
> > + * formatted in piped mode (true).
> > + */
> > err = cs_etm__setup_queue(etm, &etm->queues.queue_array[idx],
> > - idx);
> > + idx, true);
> > if (err)
> > return err;
> >
> > @@ -2678,6 +2695,7 @@ static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_o
> > union perf_event auxtrace_fragment;
> > __u64 aux_offset, aux_size;
> > __u32 idx;
> > + bool formatted;
> >
> > struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
> > struct cs_etm_auxtrace,
> > @@ -2745,7 +2763,9 @@ static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_o
> > return err;
> >
> > idx = auxtrace_event->idx;
> > - return cs_etm__setup_queue(etm, &etm->queues.queue_array[idx], idx);
> > + formatted = !(aux_event->flags & PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW);
> > + return cs_etm__setup_queue(etm, &etm->queues.queue_array[idx],
> > + idx, formatted);
> > }
> >
> > /* Wasn't inside this buffer, but there were no parse errors. 1 == 'not found' */
> > @@ -3034,6 +3054,13 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
> > goto err_delete_thread;
> >
> > etm->data_queued = etm->queues.populated;
> > + /*
> > + * Print warning in pipe mode, see cs_etm__process_auxtrace_event() and
> > + * cs_etm__queue_aux_fragment() for details relating to limitations.
> > + */
> > + if (!etm->data_queued)
> > + pr_warning("CS ETM warning: Coresight decode and TRBE support requires random file access.\n"
> > + "Continuing with best effort decoding in piped mode.\n\n");
> >
> > return 0;
> >
> > --
> > 2.28.0
> >
--
- Arnaldo
prev parent reply other threads:[~2021-07-22 21:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-21 15:01 [PATCH v2 0/6] perf cs-etm: Support TRBE (unformatted decoding) James Clark
2021-07-21 15:01 ` [PATCH v2 1/6] perf cs-etm: Refactor initialisation of kernel start address James Clark
2021-07-21 15:01 ` [PATCH v2 2/6] perf cs-etm: Split setup and timestamp search functions James Clark
2021-07-21 15:01 ` [PATCH v2 3/6] perf cs-etm: Only setup queues when they are modified James Clark
2021-07-21 15:02 ` [PATCH v2 4/6] perf cs-etm: Suppress printing when resetting decoder James Clark
2021-07-21 15:02 ` [PATCH v2 5/6] perf cs-etm: Use existing decoder instead of resetting it James Clark
2021-07-21 15:02 ` [PATCH v2 6/6] perf cs-etm: Pass unformatted flag to decoder James Clark
2021-07-21 16:05 ` Mathieu Poirier
2021-07-22 21:00 ` Arnaldo Carvalho de Melo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YPncfIyzvzj4v/rx@kernel.org \
--to=acme@kernel.org \
--cc=al.grant@arm.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=anshuman.khandual@arm.com \
--cc=coresight@lists.linaro.org \
--cc=james.clark@arm.com \
--cc=john.garry@huawei.com \
--cc=jolsa@redhat.com \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=namhyung@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).