[PATCH] power: supply: check if calc_soc succeeded in pm860x_init_battery

From: trix@redhat.com
To: sre@kernel.org, anton.vorontsov@linaro.org, jtzhou@marvell.com
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org, Tom Rix <trix@redhat.com>
Subject: [PATCH] power: supply: check if calc_soc succeeded in pm860x_init_battery
Date: Sun, 12 Jul 2020 12:23:51 -0700	[thread overview]
Message-ID: <20200712192351.15428-1-trix@redhat.com> (raw)

From: Tom Rix <trix@redhat.com>

clang static analysis flags this error

88pm860x_battery.c:522:19: warning: Assigned value is
  garbage or undefined [core.uninitialized.Assign]
                info->start_soc = soc;
                                ^ ~~~
soc is set by calling calc_soc.
But calc_soc can return without setting soc.

So check the return status and bail similarly to other
checks in pm860x_init_battery and initialize soc to
silence the warning.

Fixes: a830d28b48bf ("power_supply: Enable battery-charger for 88pm860x")

Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/power/supply/88pm860x_battery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
index 1308f3a185f3..590da88a17a2 100644
--- a/drivers/power/supply/88pm860x_battery.c
+++ b/drivers/power/supply/88pm860x_battery.c
@@ -433,7 +433,7 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	int ret;
 	int data;
 	int bat_remove;
-	int soc;
+	int soc = 0;
 
 	/* measure enable on GPADC1 */
 	data = MEAS1_GP1;
@@ -496,7 +496,9 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	}
 	mutex_unlock(&info->lock);
 
-	calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	if (ret < 0)
+		goto out;
 
 	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
 	bat_remove = data & BAT_WU_LOG;
-- 
2.18.1

