Hi,

On Wed, Jul 15, 2020 at 10:55:12PM +0800, Crag Wang wrote:
> This is a long life mode set in the factory for extended warranty
> battery, the power charging rate is customized so that battery at
> work last longer.
> 
> Presently switching to a different battery charging mode is through
> EC PID 0x0710 to configure the battery firmware, this operation will
> be blocked by EC with failure code 0x01 when PLL mode is already
> in use.
> 
> Signed-off-by: Crag Wang <crag.wang@dell.com>
> ---
>  Documentation/ABI/testing/sysfs-class-power-wilco | 3 +++
>  drivers/power/supply/power_supply_sysfs.c         | 1 +
>  drivers/power/supply/wilco-charger.c              | 5 +++++
>  include/linux/power_supply.h                      | 1 +
>  4 files changed, 10 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco
> index da1d6ffe5e3c..1c91b17b6fd4 100644
> --- a/Documentation/ABI/testing/sysfs-class-power-wilco
> +++ b/Documentation/ABI/testing/sysfs-class-power-wilco
> @@ -14,6 +14,9 @@ Description:
>  			Charging begins when level drops below
>  			charge_control_start_threshold, and ceases when
>  			level is above charge_control_end_threshold.
> +		Permanent Long Life: Last longer battery life, this mode
> +			is programmed once in the factory. Switching to a
> +			different mode is unavailable.

The documentation lacks one important aspect: What happens
if I have a device where the factory did not program "Long Life"?
I.e. what happens when

# cat /sys/class/power_supply/wilco-charger/charge_type
Standard
# echo "Long Life" > /sys/class/power_supply/wilco-charger/charge_type

Will the controller switch into permanent long life battery mode
without any exit strategy?

>  What:		/sys/class/power_supply/wilco-charger/charge_control_start_threshold
>  Date:		April 2019
> diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
> index bc79560229b5..af3884015ad8 100644
> --- a/drivers/power/supply/power_supply_sysfs.c
> +++ b/drivers/power/supply/power_supply_sysfs.c
> @@ -87,6 +87,7 @@ static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = {
>  	[POWER_SUPPLY_CHARGE_TYPE_STANDARD]	= "Standard",
>  	[POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE]	= "Adaptive",
>  	[POWER_SUPPLY_CHARGE_TYPE_CUSTOM]	= "Custom",
> +	[POWER_SUPPLY_CHARGE_TYPE_LONGLIFE]	= "Permanent Long Life",

The "Permanent" part is specific to the Wilco EC, so I think it's
better to avoid it in the generic API. I think it's better to use
just "Long Life" (and keep the wilco specific sysfs Documentation,
that Long Life configuration is permanent).

-- Sebastian

>  };
>  
>  static const char * const POWER_SUPPLY_HEALTH_TEXT[] = {
> diff --git a/drivers/power/supply/wilco-charger.c b/drivers/power/supply/wilco-charger.c
> index b3c6d7cdd731..713c3018652f 100644
> --- a/drivers/power/supply/wilco-charger.c
> +++ b/drivers/power/supply/wilco-charger.c
> @@ -27,6 +27,7 @@ enum charge_mode {
>  	CHARGE_MODE_AC = 3,	/* Mostly AC use, used for Trickle */
>  	CHARGE_MODE_AUTO = 4,	/* Used for Adaptive */
>  	CHARGE_MODE_CUSTOM = 5,	/* Used for Custom */
> +	CHARGE_MODE_LONGLIFE = 6, /* Used for Permanent Long Life */
>  };
>  
>  #define CHARGE_LOWER_LIMIT_MIN	50
> @@ -48,6 +49,8 @@ static int psp_val_to_charge_mode(int psp_val)
>  		return CHARGE_MODE_AUTO;
>  	case POWER_SUPPLY_CHARGE_TYPE_CUSTOM:
>  		return CHARGE_MODE_CUSTOM;
> +	case POWER_SUPPLY_CHARGE_TYPE_LONGLIFE:
> +		return CHARGE_MODE_LONGLIFE;
>  	default:
>  		return -EINVAL;
>  	}
> @@ -67,6 +70,8 @@ static int charge_mode_to_psp_val(enum charge_mode mode)
>  		return POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE;
>  	case CHARGE_MODE_CUSTOM:
>  		return POWER_SUPPLY_CHARGE_TYPE_CUSTOM;
> +	case CHARGE_MODE_LONGLIFE:
> +		return POWER_SUPPLY_CHARGE_TYPE_LONGLIFE;
>  	default:
>  		return -EINVAL;
>  	}
> diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
> index ac1345a48ad0..528a3eaa2320 100644
> --- a/include/linux/power_supply.h
> +++ b/include/linux/power_supply.h
> @@ -48,6 +48,7 @@ enum {
>  	POWER_SUPPLY_CHARGE_TYPE_STANDARD,	/* normal speed */
>  	POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE,	/* dynamically adjusted speed */
>  	POWER_SUPPLY_CHARGE_TYPE_CUSTOM,	/* use CHARGE_CONTROL_* props */
> +	POWER_SUPPLY_CHARGE_TYPE_LONGLIFE,	/* slow speed, longer life */
>  };
>  
>  enum {
> -- 
> 2.17.1
> 
> ---
> The original author, Nick no longer being around and that's why he's not on CC.