On Tue, May 30, 2023 at 04:48:46PM +0200, Krzysztof Kozlowski wrote:
> Make the pattern matching node names a bit stricter to improve DTS
> consistency.  The pattern is restricted to:
> 1. Only one unit address or one -N suffix,
> 2. -N suffixes to decimal numbers.
> 
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

> 
> ---
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/pwm/pwm.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
> index 3c01f85029e5..abd9fa873354 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm.yaml
> +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
> @@ -13,7 +13,7 @@ select: false
>  
>  properties:
>    $nodename:
> -    pattern: "^pwm(@.*|-[0-9a-f])*$"
> +    pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"

With this patch we forbid now the following patterns:

	pwm-[0-9a-f][@-].*
	pwm-0[0-9a-f]+
	pwm-[a-f]([@-].*)?

Checking for such names:

	$ git grep -oP '\bpwm-([0-9a-f][@-].*|0[0-9a-f]+|[0-9]*[a-f][0-9a-f]*)(*pla:\s*\{)' arch/*/boot/dts
	arch/arm/boot/dts/meson8.dtsi:pwm-f-ao
	arch/arm/boot/dts/meson8.dtsi:pwm-e
	arch/arm/boot/dts/meson8b.dtsi:pwm-d
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-a
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-b-x7
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-b-x19
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-c-c
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-c-x5
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-c-x8
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-d-x3
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-d-x6
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-e
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-f-z
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-f-a
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-f-x
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-f-h
	arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:pwm-a-e

These are all pinmux-settings and no pwm nodes, so the change is fine.
(But arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi isn't properly
sorted alphabetically.)

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Best regards and Thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |