From: Jinpu Wang <jinpu.wang@ionos.com>
To: Leon Romanovsky <leon@kernel.org>
Cc: Jack Wang <xjtuwjp@gmail.com>,
Md Haris Iqbal <haris.iqbal@ionos.com>,
RDMA mailing list <linux-rdma@vger.kernel.org>,
Bart Van Assche <bvanassche@acm.org>,
Doug Ledford <dledford@redhat.com>,
Jason Gunthorpe <jgg@ziepe.ca>, Gioh Kim <gi-oh.kim@ionos.com>,
Aleksei Marov <aleksei.marov@ionos.com>
Subject: Re: [PATCH for-next 6/7] RDMA/rtrs: Do not allow sessname to contain special symbols / and .
Date: Thu, 30 Sep 2021 08:03:40 +0200 [thread overview]
Message-ID: <CAMGffE=mv8jJYeNC7BjiGbOt4qEFAQhXWROk4Uwzg5ED4a0sug@mail.gmail.com> (raw)
In-Reply-To: <YVRWXim7T0mReBu/@unreal>
On Wed, Sep 29, 2021 at 2:04 PM Leon Romanovsky <leon@kernel.org> wrote:
>
> On Wed, Sep 29, 2021 at 09:00:56AM +0200, Jack Wang wrote:
> > Leon Romanovsky <leon@kernel.org> 于2021年9月28日周二 上午9:28写道:
> > >
> > > On Tue, Sep 28, 2021 at 09:08:26AM +0200, Jack Wang wrote:
> > > > Leon Romanovsky <leon@kernel.org> 于2021年9月27日周一 下午2:23写道:
> > > > >
> > > > > On Wed, Sep 22, 2021 at 02:53:32PM +0200, Md Haris Iqbal wrote:
> > > > > > Allowing these characters in sessname can lead to unexpected results,
> > > > > > particularly because / is used as a separator between files in a path,
> > > > > > and . points to the current directory.
> > > > > >
> > > > > > Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
> > > > > > Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
> > > > > > Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
> > > > > > ---
> > > > > > drivers/infiniband/ulp/rtrs/rtrs-clt.c | 6 ++++++
> > > > > > drivers/infiniband/ulp/rtrs/rtrs-srv.c | 5 +++++
> > > > > > 2 files changed, 11 insertions(+)
> > > > >
> > > > > It will be safer if you check for only allowed symbols and disallow
> > > > > everything else. Check for: a-Z, 0-9 and "-".
> > > > >
> > > > Hi Leon,
> > > >
> > > > Thanks for your suggestions.
> > > > The reasons we choose to do disallow only '/' and '.':
> > > > 1 more flexible, most UNIX filenames allow any 8-bit set, except '/' and null.
> > >
> > > So you need to add all possible protections and checks that VFS has to allow "random" name.
> > It's only about sysfs here, as we use sessname to create dir in sysfs,
> > and I checked the code, it allows any 8-bit set, and convert '/' to
> > '!', see https://elixir.bootlin.com/linux/latest/source/lib/kobject.c#L299
> > >
> > > > 2 matching for 2 characters is faster than checking all the allowed
> > > > symbols during session establishment.
> > >
> > > Extra CPU cycles won't make any difference here.
> > As we can have hundreds of sessions, in the end, it matters.
>
> Your rtrs_clt_open() function is far from being optimized for
> performance. It allocates memory, iterates over all paths, creates
> sysfs and kobject.
>
> So no, it doesn't matter here.
>
Let me reiterate, why do we want to further slow it down, what do you
anticipate if we only do the disallow approach
as we do it now?
Thanks!
>
> Thanks
>
> >
> > Thanks
> > >
> > > > 3 we do use hostnameA@hostnameB for production usage right now, we
> > > > don't want to break the user space.
> > >
> > > You can add "@" into the list of accepted symbols.
> > >
> > > >
> > > > I hope this makes sense to you.
> > > >
> > > > Regards!
> > > >
> > > > >
> > > > > >
> > > > > > diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> > > > > > index bc8824b4ee0d..15c0077dd27e 100644
> > > > > > --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> > > > > > +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> > > > > > @@ -2788,6 +2788,12 @@ struct rtrs_clt *rtrs_clt_open(struct rtrs_clt_ops *ops,
> > > > > > struct rtrs_clt *clt;
> > > > > > int err, i;
> > > > > >
> > > > > > + if (strchr(sessname, '/') || strchr(sessname, '.')) {
> > > > > > + pr_err("sessname cannot contain / and .\n");
> > > > > > + err = -EINVAL;
> > > > > > + goto out;
> > > > > > + }
> > > > > > +
> > > > > > clt = alloc_clt(sessname, paths_num, port, pdu_sz, ops->priv,
> > > > > > ops->link_ev,
> > > > > > reconnect_delay_sec,
> > > > > > diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
> > > > > > index 078a1cbac90c..7df71f8cf149 100644
> > > > > > --- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c
> > > > > > +++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c
> > > > > > @@ -803,6 +803,11 @@ static int process_info_req(struct rtrs_srv_con *con,
> > > > > > return err;
> > > > > > }
> > > > > >
> > > > > > + if (strchr(msg->sessname, '/') || strchr(msg->sessname, '.')) {
> > > > > > + rtrs_err(s, "sessname cannot contain / and .\n");
> > > > > > + return -EINVAL;
> > > > > > + }
> > > > > > +
> > > > > > if (exist_sessname(sess->srv->ctx,
> > > > > > msg->sessname, &sess->srv->paths_uuid)) {
> > > > > > rtrs_err(s, "sessname is duplicated: %s\n", msg->sessname);
> > > > > > --
> > > > > > 2.25.1
> > > > > >
next prev parent reply other threads:[~2021-09-30 6:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-22 12:53 [PATCH for-next 0/7] Misc update for RTRS Md Haris Iqbal
2021-09-22 12:53 ` [PATCH for-next 1/7] RDMA/rtrs: Use sysfs_emit instead of s*printf function for sysfs show Md Haris Iqbal
2021-09-22 12:53 ` [PATCH for-next 2/7] RDMA/rtrs: Remove len parameter from helper print functions of sysfs Md Haris Iqbal
2021-09-22 12:53 ` [PATCH for-next 3/7] RDMA/rtrs: Fix warning when use poll mode on client side Md Haris Iqbal
2021-09-22 12:53 ` [PATCH for-next 4/7] RDMA/rtrs: Replace duplicate check with is_pollqueue helper Md Haris Iqbal
2021-09-22 12:53 ` [PATCH for-next 5/7] RDMA/rtrs: Introduce destroy_cq helper Md Haris Iqbal
2021-09-22 12:53 ` [PATCH for-next 6/7] RDMA/rtrs: Do not allow sessname to contain special symbols / and Md Haris Iqbal
2021-09-27 12:22 ` Leon Romanovsky
2021-09-28 7:08 ` Jack Wang
2021-09-28 7:28 ` Leon Romanovsky
2021-09-29 7:00 ` Jack Wang
2021-09-29 12:04 ` Leon Romanovsky
2021-09-30 6:03 ` Jinpu Wang [this message]
2021-09-30 7:01 ` Leon Romanovsky
2021-09-30 7:10 ` Jinpu Wang
2021-09-30 7:53 ` Leon Romanovsky
2021-10-01 12:40 ` Jinpu Wang
2021-10-01 14:56 ` Leon Romanovsky
2021-10-04 5:41 ` Jinpu Wang
2021-10-04 18:47 ` Jason Gunthorpe
2021-10-04 21:05 ` Jinpu Wang
2021-09-22 12:53 ` [PATCH for-next 7/7] RDMA/rtrs-clt: Follow "one entry one value" rule for IO migration stats Md Haris Iqbal
2021-10-04 19:49 ` [PATCH for-next 0/7] Misc update for RTRS Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMGffE=mv8jJYeNC7BjiGbOt4qEFAQhXWROk4Uwzg5ED4a0sug@mail.gmail.com' \
--to=jinpu.wang@ionos.com \
--cc=aleksei.marov@ionos.com \
--cc=bvanassche@acm.org \
--cc=dledford@redhat.com \
--cc=gi-oh.kim@ionos.com \
--cc=haris.iqbal@ionos.com \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=xjtuwjp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).