From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Cc: linux-remoteproc@vger.kernel.org,
"Michael S. Tsirkin" <mst@redhat.com>,
Ohad Ben-Cohen <ohad@wizery.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>
Subject: Re: [PATCH] rpmsg: virtio: add endianness conversions
Date: Mon, 15 Jun 2020 14:47:07 -0600 [thread overview]
Message-ID: <20200615204707.GA231755@xps15> (raw)
In-Reply-To: <20200608123932.GF10562@ubuntu>
On Mon, Jun 08, 2020 at 02:39:32PM +0200, Guennadi Liakhovetski wrote:
> According to the VirtIO 1.0 spec data, sent over virtual queues must
> be in little-endian format. Update the RPMsg VirtIO implementation
> to enforce that.
>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
> ---
> drivers/rpmsg/virtio_rpmsg_bus.c | 61 ++++++++++++++++++++++------------------
> 1 file changed, 33 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> index 07d4f33..b8ff42b 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -11,6 +11,8 @@
>
> #define pr_fmt(fmt) "%s: " fmt, __func__
>
> +#include <asm/byteorder.h>
> +
> #include <linux/dma-mapping.h>
> #include <linux/idr.h>
> #include <linux/jiffies.h>
> @@ -22,6 +24,7 @@
> #include <linux/scatterlist.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> +#include <linux/types.h>
> #include <linux/virtio.h>
> #include <linux/virtio_ids.h>
> #include <linux/virtio_config.h>
> @@ -84,11 +87,11 @@ struct virtproc_info {
> * Every message sent(/received) on the rpmsg bus begins with this header.
> */
> struct rpmsg_hdr {
> - u32 src;
> - u32 dst;
> - u32 reserved;
> - u16 len;
> - u16 flags;
> + __le32 src;
> + __le32 dst;
> + __le32 reserved;
> + __le16 len;
> + __le16 flags;
> u8 data[];
> } __packed;
>
> @@ -106,8 +109,8 @@ struct rpmsg_hdr {
> */
> struct rpmsg_ns_msg {
> char name[RPMSG_NAME_SIZE];
> - u32 addr;
> - u32 flags;
> + __le32 addr;
> + __le32 flags;
> } __packed;
>
> /**
> @@ -335,8 +338,8 @@ static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
> struct rpmsg_ns_msg nsm;
>
> strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> - nsm.addr = rpdev->ept->addr;
> - nsm.flags = RPMSG_NS_CREATE;
> + nsm.addr = cpu_to_le32(rpdev->ept->addr);
> + nsm.flags = cpu_to_le32(RPMSG_NS_CREATE);
So how will this work with existing firmware?
>
> err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> if (err)
> @@ -359,8 +362,8 @@ static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
> struct rpmsg_ns_msg nsm;
>
> strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> - nsm.addr = rpdev->ept->addr;
> - nsm.flags = RPMSG_NS_DESTROY;
> + nsm.addr = cpu_to_le32(rpdev->ept->addr);
> + nsm.flags = cpu_to_le32(RPMSG_NS_DESTROY);
>
> err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> if (err)
> @@ -612,15 +615,15 @@ static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev,
> }
> }
>
> - msg->len = len;
> + msg->len = cpu_to_le16(len);
> msg->flags = 0;
> - msg->src = src;
> - msg->dst = dst;
> + msg->src = cpu_to_le32(src);
> + msg->dst = cpu_to_le32(dst);
> msg->reserved = 0;
> memcpy(msg->data, data, len);
>
> dev_dbg(dev, "TX From 0x%x, To 0x%x, Len %d, Flags %d, Reserved %d\n",
> - msg->src, msg->dst, msg->len, msg->flags, msg->reserved);
> + src, dst, len, msg->flags, msg->reserved);
> #if defined(CONFIG_DYNAMIC_DEBUG)
> dynamic_hex_dump("rpmsg_virtio TX: ", DUMP_PREFIX_NONE, 16, 1,
> msg, sizeof(*msg) + msg->len, true);
> @@ -704,13 +707,15 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> {
> struct rpmsg_endpoint *ept;
> struct scatterlist sg;
> + unsigned int msg_len = le16_to_cpu(msg->len);
And here too, along with everything else that follows?
As Michael suggested using __virtioXY types would allow to use the
virtioXY_to_cpu() and cpu_to_virtioXY() macros, which is definitely a step in
the right direction.
Thanks,
Mathieu
> int err;
>
> dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
> - msg->src, msg->dst, msg->len, msg->flags, msg->reserved);
> + le32_to_cpu(msg->src), le32_to_cpu(msg->dst), msg_len,
> + le16_to_cpu(msg->flags), le32_to_cpu(msg->reserved));
> #if defined(CONFIG_DYNAMIC_DEBUG)
> dynamic_hex_dump("rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
> - msg, sizeof(*msg) + msg->len, true);
> + msg, sizeof(*msg) + msg_len, true);
> #endif
>
> /*
> @@ -718,15 +723,15 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> * the reported payload length.
> */
> if (len > vrp->buf_size ||
> - msg->len > (len - sizeof(struct rpmsg_hdr))) {
> - dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg->len);
> + msg_len > (len - sizeof(struct rpmsg_hdr))) {
> + dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg_len);
> return -EINVAL;
> }
>
> /* use the dst addr to fetch the callback of the appropriate user */
> mutex_lock(&vrp->endpoints_lock);
>
> - ept = idr_find(&vrp->endpoints, msg->dst);
> + ept = idr_find(&vrp->endpoints, le32_to_cpu(msg->dst));
>
> /* let's make sure no one deallocates ept while we use it */
> if (ept)
> @@ -739,8 +744,8 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
> mutex_lock(&ept->cb_lock);
>
> if (ept->cb)
> - ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
> - msg->src);
> + ept->cb(ept->rpdev, msg->data, msg_len, ept->priv,
> + le32_to_cpu(msg->src));
>
> mutex_unlock(&ept->cb_lock);
>
> @@ -846,15 +851,15 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> /* don't trust the remote processor for null terminating the name */
> msg->name[RPMSG_NAME_SIZE - 1] = '\0';
>
> - dev_info(dev, "%sing channel %s addr 0x%x\n",
> - msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
> - msg->name, msg->addr);
> -
> strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
> chinfo.src = RPMSG_ADDR_ANY;
> - chinfo.dst = msg->addr;
> + chinfo.dst = le32_to_cpu(msg->addr);
> +
> + dev_info(dev, "%sing channel %s addr 0x%x\n",
> + le32_to_cpu(msg->flags) & RPMSG_NS_DESTROY ? "destroy" : "creat",
> + msg->name, chinfo.dst);
>
> - if (msg->flags & RPMSG_NS_DESTROY) {
> + if (le32_to_cpu(msg->flags) & RPMSG_NS_DESTROY) {
> ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
> if (ret)
> dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
> --
> 1.9.3
>
next prev parent reply other threads:[~2020-06-15 20:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-08 12:39 [PATCH] rpmsg: virtio: add endianness conversions Guennadi Liakhovetski
2020-06-08 13:13 ` Michael S. Tsirkin
2020-06-15 20:47 ` Mathieu Poirier [this message]
2020-06-16 6:14 ` Guennadi Liakhovetski
2020-06-16 7:30 ` [PATCH v2] " Guennadi Liakhovetski
2020-06-30 17:50 ` Mathieu Poirier
2020-07-01 10:00 ` Michael S. Tsirkin
2020-07-06 12:47 ` Guennadi Liakhovetski
2020-07-06 12:56 ` Guennadi Liakhovetski
2020-07-06 13:38 ` [PATCH v3] " Guennadi Liakhovetski
2020-07-07 15:11 ` Arnaud POULIQUEN
2020-07-07 15:34 ` [PATCH v4] " Guennadi Liakhovetski
2020-07-07 15:38 ` Mathieu Poirier
2020-07-10 6:20 ` Guennadi Liakhovetski
2020-07-21 8:56 ` [PATCH RESEND " Guennadi Liakhovetski
2020-07-21 10:04 ` Michael S. Tsirkin
2020-07-22 3:39 ` Bjorn Andersson
2020-07-22 4:00 ` patchwork-bot+linux-remoteproc
2020-07-27 16:07 ` Michael S. Tsirkin
2020-07-27 16:09 ` Mathieu Poirier
2020-07-28 9:51 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200615204707.GA231755@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=guennadi.liakhovetski@linux.intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mst@redhat.com \
--cc=ohad@wizery.com \
--cc=pierre-louis.bossart@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).