From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Jacopo Mondi <jacopo@jmondi.org>
Cc: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Benoit Parrot" <bparrot@ti.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
"Michal Simek" <michal.simek@xilinx.com>
Subject: Re: [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
Date: Fri, 22 Feb 2019 00:31:32 +0200 [thread overview]
Message-ID: <20190221223131.rago5jmpxhygtuep@kekkonen.localdomain> (raw)
In-Reply-To: <20190221143940.k56z2vwovu3y5okh@uno.localdomain>
Hi Jacopo,
On Thu, Feb 21, 2019 at 03:39:40PM +0100, Jacopo Mondi wrote:
> Hi Sakari,
> one quick question
>
> On Fri, Nov 02, 2018 at 12:31:30AM +0100, Niklas Söderlund wrote:
> > From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> >
> > - Add sink and source streams for multiplexed links
> > - Copy the argument back in case of an error. This is needed to let the
> > caller know the number of routes.
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> > drivers/media/v4l2-core/v4l2-ioctl.c | 20 +++++++++++++-
> > drivers/media/v4l2-core/v4l2-subdev.c | 28 +++++++++++++++++++
> > include/media/v4l2-subdev.h | 7 +++++
> > include/uapi/linux/v4l2-subdev.h | 40 +++++++++++++++++++++++++++
> > 4 files changed, 94 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> > index 7de041bae84fb2f2..40406acb51ec0906 100644
> > --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> > @@ -19,6 +19,7 @@
> > #include <linux/kernel.h>
> > #include <linux/version.h>
> >
> > +#include <linux/v4l2-subdev.h>
> > #include <linux/videodev2.h>
> >
> > #include <media/v4l2-common.h>
> > @@ -2924,6 +2925,23 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
> > }
> > break;
> > }
> > +
> > + case VIDIOC_SUBDEV_G_ROUTING:
> > + case VIDIOC_SUBDEV_S_ROUTING: {
> > + struct v4l2_subdev_routing *route = parg;
> > +
> > + if (route->num_routes > 0) {
> > + if (route->num_routes > 256)
> > + return -EINVAL;
> > +
> > + *user_ptr = (void __user *)route->routes;
> > + *kernel_ptr = (void *)&route->routes;
> > + *array_size = sizeof(struct v4l2_subdev_route)
> > + * route->num_routes;
> > + ret = 1;
> > + }
> > + break;
> > + }
> > }
> >
> > return ret;
> > @@ -3033,7 +3051,7 @@ video_usercopy(struct file *file, unsigned int cmd, unsigned long arg,
> > * Some ioctls can return an error, but still have valid
> > * results that must be returned.
> > */
> > - if (err < 0 && !always_copy)
> > + if (err < 0 && !always_copy && cmd != VIDIOC_SUBDEV_G_ROUTING)
> > goto out;
> >
> > out_array_args:
> > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
> > index 792f41dffe2329b9..1d3b37cf548fa533 100644
> > --- a/drivers/media/v4l2-core/v4l2-subdev.c
> > +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> > @@ -516,7 +516,35 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
> >
> > case VIDIOC_SUBDEV_QUERYSTD:
> > return v4l2_subdev_call(sd, video, querystd, arg);
> > +
> > + case VIDIOC_SUBDEV_G_ROUTING:
> > + return v4l2_subdev_call(sd, pad, get_routing, arg);
> > +
> > + case VIDIOC_SUBDEV_S_ROUTING: {
> > + struct v4l2_subdev_routing *route = arg;
> > + unsigned int i;
> > +
> > + if (route->num_routes > sd->entity.num_pads)
> > + return -EINVAL;
>
> Can't the number of routes exceeds the total number of pad?
>
> To make an example, a subdevice with 2 sink pads, and 1 multiplexed
> source pad, with 2 streams would expose the following routing table,
> right?
>
> pad #0 = sink, 1 stream
> pad #1 = sink, 1 stream
> pad #2 = source, 2 streams
>
> Routing table:
> 0/0 -> 2/0
> 0/0 -> 2/1
> 1/0 -> 2/0
> 1/0 -> 2/1
>
> In general, the number of accepted routes should depend on the number
> of streams, not pads, and that's better handled by drivers, am I
> wrong?
Good point. Is the above configuration meaningful? I.e. you have a mux
device that does some processing as well by combining the streams?
It's far-fetched but at the moment the API does not really bend for that.
It still might in the future.
I guess we could just remove the check, and let drivers handle it.
>
> Thanks
> j
>
> > +
> > + for (i = 0; i < route->num_routes; ++i) {
> > + unsigned int sink = route->routes[i].sink_pad;
> > + unsigned int source = route->routes[i].source_pad;
> > + struct media_pad *pads = sd->entity.pads;
> > +
> > + if (sink >= sd->entity.num_pads ||
> > + source >= sd->entity.num_pads)
> > + return -EINVAL;
> > +
> > + if (!(pads[sink].flags & MEDIA_PAD_FL_SINK) ||
> > + !(pads[source].flags & MEDIA_PAD_FL_SOURCE))
> > + return -EINVAL;
> > + }
> > +
> > + return v4l2_subdev_call(sd, pad, set_routing, route);
> > + }
> > #endif
> > +
> > default:
> > return v4l2_subdev_call(sd, core, ioctl, cmd, arg);
> > }
> > diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> > index 9102d6ca566e01f2..5acaeeb9b3cacefa 100644
> > --- a/include/media/v4l2-subdev.h
> > +++ b/include/media/v4l2-subdev.h
> > @@ -679,6 +679,9 @@ struct v4l2_subdev_pad_config {
> > *
> > * @set_frame_desc: set the low level media bus frame parameters, @fd array
> > * may be adjusted by the subdev driver to device capabilities.
> > + *
> > + * @get_routing: callback for VIDIOC_SUBDEV_G_ROUTING IOCTL handler.
> > + * @set_routing: callback for VIDIOC_SUBDEV_S_ROUTING IOCTL handler.
> > */
> > struct v4l2_subdev_pad_ops {
> > int (*init_cfg)(struct v4l2_subdev *sd,
> > @@ -719,6 +722,10 @@ struct v4l2_subdev_pad_ops {
> > struct v4l2_mbus_frame_desc *fd);
> > int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
> > struct v4l2_mbus_frame_desc *fd);
> > + int (*get_routing)(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_routing *route);
> > + int (*set_routing)(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_routing *route);
> > };
> >
> > /**
> > diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
> > index 03970ce3074193e6..af069bfb10ca23a5 100644
> > --- a/include/uapi/linux/v4l2-subdev.h
> > +++ b/include/uapi/linux/v4l2-subdev.h
> > @@ -155,6 +155,44 @@ struct v4l2_subdev_selection {
> > __u32 reserved[8];
> > };
> >
> > +#define V4L2_SUBDEV_ROUTE_FL_ACTIVE (1 << 0)
> > +#define V4L2_SUBDEV_ROUTE_FL_IMMUTABLE (1 << 1)
> > +
> > +/**
> > + * struct v4l2_subdev_route - A signal route inside a subdev
> > + * @sink_pad: the sink pad
> > + * @sink_stream: the sink stream
> > + * @source_pad: the source pad
> > + * @source_stream: the source stream
> > + * @flags: route flags:
> > + *
> > + * V4L2_SUBDEV_ROUTE_FL_ACTIVE: Is the stream in use or not? An
> > + * active stream will start when streaming is enabled on a video
> > + * node. Set by the user.
> > + *
> > + * V4L2_SUBDEV_ROUTE_FL_IMMUTABLE: Is the stream immutable, i.e.
> > + * can it be activated and inactivated? Set by the driver.
> > + */
> > +struct v4l2_subdev_route {
> > + __u32 sink_pad;
> > + __u32 sink_stream;
> > + __u32 source_pad;
> > + __u32 source_stream;
> > + __u32 flags;
> > + __u32 reserved[5];
> > +};
> > +
> > +/**
> > + * struct v4l2_subdev_routing - Routing information
> > + * @routes: the routes array
> > + * @num_routes: the total number of routes in the routes array
> > + */
> > +struct v4l2_subdev_routing {
> > + struct v4l2_subdev_route *routes;
This should be just __u64, to avoid writing compat code. The patch was
written before we started doing that. :-) Please see e.g. the media device
topology IOCTL.
> > + __u32 num_routes;
> > + __u32 reserved[5];
> > +};
> > +
> > /* Backwards compatibility define --- to be removed */
> > #define v4l2_subdev_edid v4l2_edid
> >
> > @@ -181,5 +219,7 @@ struct v4l2_subdev_selection {
> > #define VIDIOC_SUBDEV_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
> > #define VIDIOC_SUBDEV_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
> > #define VIDIOC_SUBDEV_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
> > +#define VIDIOC_SUBDEV_G_ROUTING _IOWR('V', 38, struct v4l2_subdev_routing)
> > +#define VIDIOC_SUBDEV_S_ROUTING _IOWR('V', 39, struct v4l2_subdev_routing)
> >
> > #endif
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
next prev parent reply other threads:[~2019-02-21 22:31 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-01 23:31 [PATCH v2 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk Niklas Söderlund
2019-01-15 21:43 ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
2019-01-15 22:03 ` Laurent Pinchart
2019-01-15 22:13 ` Sakari Ailus
2019-01-15 22:07 ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
2019-01-15 22:21 ` Laurent Pinchart
[not found] ` <20190115223406.mxgzl36cp54gb7nv@kekkonen.localdomain>
2019-01-15 23:28 ` Laurent Pinchart
2019-01-22 14:50 ` Sakari Ailus
2019-02-14 15:15 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
2019-01-15 22:24 ` Laurent Pinchart
2019-01-15 22:36 ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
2019-01-15 22:38 ` Laurent Pinchart
2019-01-15 22:48 ` Sakari Ailus
2019-02-14 15:53 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
2019-01-15 22:54 ` Laurent Pinchart
2019-01-22 15:31 ` Sakari Ailus
2019-01-22 15:37 ` Laurent Pinchart
2019-01-22 16:16 ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 07/30] media: entity: Add has_route entity operation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 08/30] media: entity: Add media_has_route() function Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
2019-01-15 22:57 ` Laurent Pinchart
2019-01-22 15:15 ` Sakari Ailus
2019-01-22 15:20 ` Laurent Pinchart
2019-02-18 9:21 ` Jacopo Mondi
2019-02-22 12:18 ` Laurent Pinchart
2019-03-04 12:35 ` Jacopo Mondi
2019-03-05 20:04 ` Laurent Pinchart
2019-03-06 8:29 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
2019-01-15 23:13 ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
2019-01-15 23:24 ` Laurent Pinchart
2019-01-22 15:36 ` Sakari Ailus
2019-01-22 15:38 ` Laurent Pinchart
2019-01-22 16:21 ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
2019-01-15 23:33 ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
2019-01-15 23:35 ` Laurent Pinchart
2019-01-22 15:38 ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 15/30] media: entity: Look for indirect routes Niklas Söderlund
2019-01-15 23:41 ` Laurent Pinchart
2019-01-22 15:56 ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
2019-01-15 23:51 ` Laurent Pinchart
2019-01-22 16:14 ` Sakari Ailus
2019-01-22 17:00 ` Laurent Pinchart
2019-02-21 14:59 ` Jacopo Mondi
2019-02-21 23:49 ` Sakari Ailus
2019-02-22 8:46 ` Jacopo Mondi
2019-02-21 14:39 ` Jacopo Mondi
2019-02-21 22:31 ` Sakari Ailus [this message]
2019-02-22 8:40 ` Jacopo Mondi
2019-02-22 11:04 ` Sakari Ailus
2019-02-22 11:17 ` Jacopo Mondi
2019-02-22 11:29 ` Sakari Ailus
2019-02-22 13:37 ` Ian Arkver
2019-02-22 13:50 ` Geert Uytterhoeven
2018-11-01 23:31 ` [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
2019-01-08 10:04 ` Geert Uytterhoeven
2019-01-15 23:53 ` Laurent Pinchart
2019-01-22 15:57 ` Sakari Ailus
2019-02-18 11:21 ` Jacopo Mondi
2019-02-21 23:50 ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
2019-02-21 14:18 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 28/30] adv748x: afe: add routing support Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-11-14 13:10 ` Nikita Yushchenko
2018-11-14 19:45 ` Niklas Söderlund
2018-12-03 22:16 ` [PATCH v2 00/30] v4l: add support for multiplexed streams Sakari Ailus
2018-12-05 22:09 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190221223131.rago5jmpxhygtuep@kekkonen.localdomain \
--to=sakari.ailus@linux.intel.com \
--cc=bparrot@ti.com \
--cc=jacopo@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).