From: Simon Horman <horms+renesas@verge.net.au>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH v6 0/7] clk: renesas: r8a77990, r8a774c0: Add Z2 clock
Date: Mon, 25 Mar 2019 17:35:49 +0100 [thread overview]
Message-ID: <20190325163556.22025-1-horms+renesas@verge.net.au> (raw)
Hi,
this series adds the Z2 clock as a clock with both a fixed and variable
divisor with a parent of PLL0 to the CPG-MSSR drivers for the R-Car E3
(r8a77990) and RZ/G2E (r8a774c0) SoCs.
In order to do so this series:
1. Parameterise Z and Z2 clock fixed divisor in shared Gen-3 CPG
driver code to allow fixed divisors other than 2 - the E3 Z2
clock has a fixed divisor of 4
2. Parameterise offset of Z and Z2 clock control bits -
the offsets on E3 differ to other R-Car Gen 3 SoCs
3. [Cleanup] Remove now redundant CLK_TYPE_GEN3_Z2
4. Support Z and Z2 clocks with high frequency parents.
The parent of the E3 Z2 clock, PLL0, is 4.8GHz and thus
when expressed in HZ must be treated as a 64bit value.
5. Actually add the Z2 clocks
Changes since v5
----------------
* Remove now redundant CLK_TYPE_GEN3_Z2
* Revise changelogs
Changes since v4
----------------
* Separate patch to add DIV64_U64_ROUND_CLOSEST helper
* Accumulate review tags
Changes since v3
----------------
* Add and use DIV64_U64_ROUND_CLOSEST in the patch to allow
high frequency parents. This corrects the patch for 32bit platforms.
* Accumulate review and testing tags.
Changes since v2
----------------
* Parameterise control bit offset rather than using a quirk
* Revised RZ/G2E patch - I was confused and updating the file for
the wrong part number
Testing Overview
----------------
v6 of this patchset was tested on Ebisu-4D/E3 with top of
clk-renesas-for-v5.2 [adeff208ea6f ("clk: renesas: r9a06g032: Add missing
PCI USB clock")]. This allowed CPUFreq to be successfully exercised.
v6 was also tested on top of clk-renesas-for-v5 for regressions
Salvator-X/M3-W ES1.0.
This v3 of this patchset was been independently tested RZ/G2E.
It is not expected that v6 will have any behavioural differences
on that (or any other 64bit) platform.
Patches List by Author
----------------------
Simon Horman (5):
clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset
clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2
math64: New DIV64_U64_ROUND_CLOSEST helper
clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency
parents
clk: renesas: r8a774c0: Add Z2 clock
Takeshi Kihara (2):
clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor
clk: renesas: r8a77990: Add Z2 clock
drivers/clk/renesas/r8a774a1-cpg-mssr.c | 4 ++--
drivers/clk/renesas/r8a774c0-cpg-mssr.c | 1 +
drivers/clk/renesas/r8a7795-cpg-mssr.c | 5 +++--
drivers/clk/renesas/r8a7796-cpg-mssr.c | 5 +++--
drivers/clk/renesas/r8a77965-cpg-mssr.c | 2 +-
drivers/clk/renesas/r8a77990-cpg-mssr.c | 1 +
drivers/clk/renesas/rcar-gen3-cpg.c | 28 +++++++++++++---------------
drivers/clk/renesas/rcar-gen3-cpg.h | 5 ++++-
include/linux/math64.h | 13 +++++++++++++
9 files changed, 41 insertions(+), 23 deletions(-)
--
2.11.0
next reply other threads:[~2019-03-25 16:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-25 16:35 Simon Horman [this message]
2019-03-25 16:35 ` [PATCH v6 1/7] clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor Simon Horman
2019-03-25 16:35 ` [PATCH v6 2/7] clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset Simon Horman
2019-03-25 16:35 ` [PATCH v6 3/7] clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 Simon Horman
2019-03-25 17:49 ` Geert Uytterhoeven
2019-03-25 16:35 ` [PATCH v6 4/7] math64: New DIV64_U64_ROUND_CLOSEST helper Simon Horman
2019-03-25 16:35 ` [PATCH v6 5/7] clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents Simon Horman
2019-03-25 16:35 ` [PATCH v6 6/7] clk: renesas: r8a77990: Add Z2 clock Simon Horman
2019-03-25 16:35 ` [PATCH v6 7/7] clk: renesas: r8a774c0: " Simon Horman
2019-03-26 10:40 ` [PATCH v6 0/7] clk: renesas: r8a77990, " Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190325163556.22025-1-horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=geert+renesas@glider.be \
--cc=linux-clk@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).