linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: kieran.bingham+renesas@ideasonboard.com, airlied@linux.ie,
	daniel@ffwll.ch, koji.matsuoka.xm@renesas.com, muroya@ksk.co.jp,
	VenkataRajesh.Kalakodima@in.bosch.com,
	Harsha.ManjulaMallikarjun@in.bosch.com,
	linux-renesas-soc@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 16/19] drm: rcar-du: kms: Collect CMM instances
Date: Tue, 20 Aug 2019 20:54:57 +0300	[thread overview]
Message-ID: <20190820175457.GJ10820@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20190706140746.29132-17-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

On Sat, Jul 06, 2019 at 04:07:43PM +0200, Jacopo Mondi wrote:
> Implement device tree parsing to collect the available CMM instances
> described by the 'cmms' property. Associate CMMs with CRTCs and store a
> mask of active CMMs in the DU group for later enablement.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c  |  6 +++
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h  |  2 +
>  drivers/gpu/drm/rcar-du/rcar_du_drv.h   |  3 ++
>  drivers/gpu/drm/rcar-du/rcar_du_group.h |  2 +
>  drivers/gpu/drm/rcar-du/rcar_du_kms.c   | 50 +++++++++++++++++++++++++
>  5 files changed, 63 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 2da46e3dc4ae..23f1d6cc1719 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -1194,6 +1194,12 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
>  	if (ret < 0)
>  		return ret;
>  
> +	/* CMM might be disabled for this CRTC. */
> +	if (rcdu->cmms[swindex]) {
> +		rcrtc->cmm = rcdu->cmms[swindex];
> +		rgrp->cmms_mask |= BIT(hwindex % 2);
> +	}
> +
>  	drm_crtc_helper_add(crtc, &crtc_helper_funcs);
>  
>  	/* Start with vertical blanking interrupt reporting disabled. */
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> index 3b7fc668996f..5f2940c42225 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
> @@ -39,6 +39,7 @@ struct rcar_du_vsp;
>   * @vblank_wait: wait queue used to signal vertical blanking
>   * @vblank_count: number of vertical blanking interrupts to wait for
>   * @group: CRTC group this CRTC belongs to
> + * @cmm: CMM associated with this CRTC
>   * @vsp: VSP feeding video to this CRTC
>   * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
>   * @writeback: the writeback connector
> @@ -64,6 +65,7 @@ struct rcar_du_crtc {
>  	unsigned int vblank_count;
>  
>  	struct rcar_du_group *group;
> +	struct platform_device *cmm;
>  	struct rcar_du_vsp *vsp;
>  	unsigned int vsp_pipe;
>  
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> index a00dccc447aa..300ec60ba31b 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> @@ -13,6 +13,7 @@
>  #include <linux/kernel.h>
>  #include <linux/wait.h>
>  
> +#include "rcar_cmm.h"
>  #include "rcar_du_crtc.h"
>  #include "rcar_du_group.h"
>  #include "rcar_du_vsp.h"
> @@ -70,6 +71,7 @@ struct rcar_du_device_info {
>  
>  #define RCAR_DU_MAX_CRTCS		4
>  #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
> +#define RCAR_DU_MAX_CMMS		4
>  #define RCAR_DU_MAX_VSPS		4
>  
>  struct rcar_du_device {
> @@ -86,6 +88,7 @@ struct rcar_du_device {
>  	struct rcar_du_encoder *encoders[RCAR_DU_OUTPUT_MAX];
>  
>  	struct rcar_du_group groups[RCAR_DU_MAX_GROUPS];
> +	struct platform_device *cmms[RCAR_DU_MAX_CMMS];
>  	struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
>  
>  	struct {
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.h b/drivers/gpu/drm/rcar-du/rcar_du_group.h
> index 87950c1f6a52..b0c1466593a3 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.h
> @@ -22,6 +22,7 @@ struct rcar_du_device;
>   * @mmio_offset: registers offset in the device memory map
>   * @index: group index
>   * @channels_mask: bitmask of populated DU channels in this group
> + * @cmms_mask: bitmask of enabled CMMs in this group

enabled or available ?

>   * @num_crtcs: number of CRTCs in this group (1 or 2)
>   * @use_count: number of users of the group (rcar_du_group_(get|put))
>   * @used_crtcs: number of CRTCs currently in use
> @@ -37,6 +38,7 @@ struct rcar_du_group {
>  	unsigned int index;
>  
>  	unsigned int channels_mask;
> +	unsigned int cmms_mask;
>  	unsigned int num_crtcs;
>  	unsigned int use_count;
>  	unsigned int used_crtcs;
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> index f8f7fff34dff..b79cda2f5531 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> @@ -18,6 +18,7 @@
>  #include <drm/drm_vblank.h>
>  
>  #include <linux/of_graph.h>
> +#include <linux/of_platform.h>
>  #include <linux/wait.h>
>  
>  #include "rcar_du_crtc.h"
> @@ -534,6 +535,51 @@ static int rcar_du_vsps_init(struct rcar_du_device *rcdu)
>  	return ret;
>  }
>  
> +static int rcar_du_cmm_init(struct rcar_du_device *rcdu)
> +{
> +	const struct device_node *np = rcdu->dev->of_node;
> +	unsigned int i;
> +	int cells;
> +
> +	cells = of_property_count_u32_elems(np, "cmms");
> +	if (cells == -EINVAL)
> +		return 0;
> +
> +	if (cells > RCAR_DU_MAX_CMMS || cells > rcdu->num_crtcs) {

Should this be

	if (cells != rcdu->num_crtcs)

or do we want to support cases where not all DU channels have a CMM in
DT ?

> +		dev_err(rcdu->dev, "Invalid 'cmms' property format\n");

How about "Invalid number of entries in 'cmms' property" ?

> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < cells; ++i) {
> +		struct platform_device *pdev;
> +		struct device_node *cmm;
> +
> +		cmm = of_parse_phandle(np, "cmms", i);
> +		if (IS_ERR(cmm)) {
> +			dev_err(rcdu->dev, "Failed to parse 'cmms' property\n");
> +			return PTR_ERR(cmm);
> +		}
> +
> +		pdev = of_find_device_by_node(cmm);
> +		if (IS_ERR(pdev)) {
> +			dev_err(rcdu->dev, "No device found for cmms[%u]\n", i);

s/cmms[%u]/CMM%u/ ?

> +			of_node_put(cmm);
> +			return PTR_ERR(pdev);
> +		}
> +
> +		if (!of_device_is_available(cmm)) {

Should this come before the pdev check, as there will be no pdev in that
case ?

> +			/* It's fine to have a phandle to a non-enabled CMM. */
> +			of_node_put(cmm);
> +			continue;
> +		}
> +
> +		of_node_put(cmm);
> +		rcdu->cmms[i] = pdev;
> +	}
> +
> +	return 0;
> +}
> +
>  int rcar_du_modeset_init(struct rcar_du_device *rcdu)
>  {
>  	static const unsigned int mmio_offsets[] = {
> @@ -624,6 +670,10 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
>  			return ret;
>  	}
>  
> +	/* Initialize the Color Management Modules. */
> +	if (rcar_du_cmm_init(rcdu))
> +		return ret;

	ret = rcar_du_cmm_init(rcdu);
	if (ret < 0)
		return ret;

> +
>  	/* Create the CRTCs. */
>  	for (swindex = 0, hwindex = 0; swindex < rcdu->num_crtcs; ++hwindex) {
>  		struct rcar_du_group *rgrp;

-- 
Regards,

Laurent Pinchart

  parent reply	other threads:[~2019-08-20 17:55 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-06 14:07 [PATCH v2 00/19] drm: rcar-du: Add Color Management Module (CMM) Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 01/19] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-07-08  7:58   ` Geert Uytterhoeven
2019-08-19 13:45     ` Geert Uytterhoeven
2019-08-20  7:48       ` Jacopo Mondi
2019-08-20  7:53         ` Geert Uytterhoeven
2019-08-20  8:05           ` Jacopo Mondi
2019-08-20 17:41           ` Laurent Pinchart
2019-08-20 18:08             ` Geert Uytterhoeven
2019-07-06 14:07 ` [PATCH v2 02/19] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 03/19] arm64: renesas: Update 'vsps' property Jacopo Mondi
2019-07-08  3:11   ` Laurent Pinchart
2019-07-09 13:10     ` Kieran Bingham
2019-08-21 12:16   ` Geert Uytterhoeven
2019-08-22 10:00     ` Jacopo Mondi
2019-08-22 15:02       ` Laurent Pinchart
2019-07-06 14:07 ` [PATCH v2 04/19] clk: renesas: r8a7796: Add CMM clocks Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 05/19] clk: renesas: r8a7795: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 06/19] clk: renesas: r8a77965: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 07/19] clk: renesas: r8a77990: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 08/19] clk: renesas: r8a77995: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 09/19] arm64: dts: renesas: r8a7796: Add CMM units Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 10/19] arm64: dts: renesas: r8a7795: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 11/19] arm64: dts: renesas: r8a77965: " Jacopo Mondi
2019-07-08  3:16   ` Laurent Pinchart
2019-07-06 14:07 ` [PATCH v2 12/19] arm64: dts: renesas: r8a77990: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 13/19] arm64: dts: renesas: r8a77995: " Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 14/19] drm: rcar-du: Add support for CMM Jacopo Mondi
2019-07-16 13:17   ` Ulrich Hecht
2019-08-20 17:37     ` Laurent Pinchart
2019-08-22 16:44       ` Jacopo Mondi
2019-08-20 17:34   ` Laurent Pinchart
2019-08-22 13:01     ` Jacopo Mondi
2019-08-22 15:10       ` Laurent Pinchart
2019-07-06 14:07 ` [PATCH v2 15/19] drm: rcar-du: Claim CMM support for Gen3 SoCs Jacopo Mondi
2019-07-16 13:18   ` Ulrich Hecht
2019-08-20 17:45   ` Laurent Pinchart
2019-07-06 14:07 ` [PATCH v2 16/19] drm: rcar-du: kms: Collect CMM instances Jacopo Mondi
2019-07-16 13:22   ` Ulrich Hecht
2019-08-20 17:54   ` Laurent Pinchart [this message]
2019-08-22 19:09     ` Jacopo Mondi
2019-07-06 14:07 ` [PATCH v2 17/19] drm: rcar-du: crtc: Enable and disable CMMs Jacopo Mondi
2019-07-16 13:31   ` Ulrich Hecht
2019-08-20 17:57   ` Laurent Pinchart
2019-07-06 14:07 ` [PATCH v2 18/19] drm: rcar-du: crtc: Register GAMMA_LUT properties Jacopo Mondi
2019-07-16 13:32   ` Ulrich Hecht
2019-08-20 18:02   ` Laurent Pinchart
2019-07-06 14:07 ` [PATCH v2 19/19] drm: rcar-du: kms: Update CMM in atomic commit tail Jacopo Mondi
2019-07-16 13:33   ` Ulrich Hecht
2019-08-20 18:42   ` Laurent Pinchart
2019-08-22 19:19     ` Jacopo Mondi
2019-08-22 19:54       ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190820175457.GJ10820@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=Harsha.ManjulaMallikarjun@in.bosch.com \
    --cc=VenkataRajesh.Kalakodima@in.bosch.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=koji.matsuoka.xm@renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=muroya@ksk.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).