Hi Laurent,

On Tue, Aug 20, 2019 at 09:42:15PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Sat, Jul 06, 2019 at 04:07:46PM +0200, Jacopo Mondi wrote:
> > Update CMM settings at in the atomic commit tail helper method.
> >
> > The CMM is updated with new gamma values provided to the driver
> > in the GAMMA_LUT blob property.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_kms.c | 35 +++++++++++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > index b79cda2f5531..f9aece78ca5f 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > @@ -21,6 +21,7 @@
> >  #include <linux/of_platform.h>
> >  #include <linux/wait.h>
> >
> > +#include "rcar_cmm.h"
> >  #include "rcar_du_crtc.h"
> >  #include "rcar_du_drv.h"
> >  #include "rcar_du_encoder.h"
> > @@ -287,6 +288,37 @@ rcar_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
> >   * Atomic Check and Update
> >   */
> >
> > +static void rcar_du_atomic_commit_update_cmm(struct drm_crtc *crtc,
> > +					     struct drm_crtc_state *old_state)
> > +{
> > +	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > +	struct rcar_cmm_config cmm_config = {};
> > +
> > +	if (!rcrtc->cmm || !crtc->state->color_mgmt_changed)
> > +		return;
> > +
> > +	if (!crtc->state->gamma_lut) {
> > +		cmm_config.lut.enable = false;
> > +		rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> > +
> > +		return;
> > +	}
> > +
> > +	cmm_config.lut.enable = true;
> > +	cmm_config.lut.table = (struct drm_color_lut *)
> > +			       crtc->state->gamma_lut->data;
> > +
> > +	/* Set LUT table size to 0 if entries should not be updated. */
> > +	if (!old_state->gamma_lut ||
> > +	    old_state->gamma_lut->base.id != crtc->state->gamma_lut->base.id)
> > +		cmm_config.lut.size = crtc->state->gamma_lut->length
> > +				    / sizeof(cmm_config.lut.table[0]);
> > +	else
> > +		cmm_config.lut.size = 0;
> > +
> > +	rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> > +}
> > +
> >  static int rcar_du_atomic_check(struct drm_device *dev,
> >  				struct drm_atomic_state *state)
> >  {
> > @@ -329,6 +361,9 @@ static void rcar_du_atomic_commit_tail(struct drm_atomic_state *old_state)
> >  			rcdu->dpad1_source = rcrtc->index;
> >  	}
> >
> > +	for_each_old_crtc_in_state(old_state, crtc, crtc_state, i)
> > +		rcar_du_atomic_commit_update_cmm(crtc, crtc_state);
> > +
>
> I think this looks good overall, but I wonder if we couldn't simplify
> the CMM driver suspend/resume and LUT caching due to config while not
> enabled by handling it on the DU side. I have a rework on the commit
> tail handler in progress, I'll think how this could be done. For now I
> think you can leave it as is.
>

Does this mean I have your R-b tag ? :)

Thanks
  j

> >  	/* Apply the atomic update. */
> >  	drm_atomic_helper_commit_modeset_disables(dev, old_state);
> >  	drm_atomic_helper_commit_planes(dev, old_state,
>
> --
> Regards,
>
> Laurent Pinchart