From: Esaki Tomohito <etom@igel.co.jp>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH] drm: rcar-du: add modifiers support
Date: Fri, 17 May 2019 16:45:19 +0900 [thread overview]
Message-ID: <69672977-dc6a-6878-1f4b-4407c4ce9723@igel.co.jp> (raw)
In-Reply-To: <20190511181027.GC13043@pendragon.ideasonboard.com>
Hello Laurent-san,
On 2019/05/12 3:10, Laurent Pinchart wrote:
> Hello Esaki-san,
>
> On Thu, May 09, 2019 at 06:25:19PM +0900, Esaki Tomohito wrote:
>> Hi Laurent-san
>>
>>> What's the purpose of this, as it adds no new functionality to the
>>> driver ? Why is this change needed ?
>>
>> Weston compositor (v5.0.0 or later) uses the DRM API to get the
>> supported modifiers and determines if the sprite plane can be used by
>> comparing the modifiers with the client specified modifier.
>> In currently driver, since the weston doesn't know supported modifiers,
>> that cannot determine if the received dmabuf can be passed through to
>> sprite plane.
>> Since there are R-Car GPU which support linear modifier, the sprite
>> plane cannot be used in a compositor similar to the weston if client
>> specify linear modifier.
>
> I don't think the right solution is to expose the linear modifier from
> all drivers that don't otherwise support modifiers. We should instead
> fix it either in Weston, and treat drivers that don't support the
> modifiers API as supporting the linear modifier only, or in the DRM/KMS
> core by reporting the linear modifier for drivers that don't explicitly
> support modifiers.
I would like to ask for an opinion to wayland community.
I will add you to Cc in that mail.
Thanks!
>> On 2019/05/09 16:14, Laurent Pinchart wrote:
>>> On Thu, May 09, 2019 at 02:45:18PM +0900, Tomohito Esaki wrote:
>>>> Add support for the linear modifier. Since the rcar-du device supports
>>>> only linear modifier, this driver doesn't support other modifiers.
>>>
>>> What's the purpose of this, as it adds no new functionality to the
>>> driver ? Why is this change needed ?
>>>
>>>> Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
>>>> ---
>>>> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 11 +++++++++++
>>>> drivers/gpu/drm/rcar-du/rcar_du_plane.c | 15 ++++++++++++++-
>>>> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 15 ++++++++++++++-
>>>> 3 files changed, 39 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
>>>> index 3b7d50a8fb9b..9c5e15a5ab1c 100644
>>>> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
>>>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
>>>> @@ -214,6 +214,16 @@ rcar_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
>>>> return ERR_PTR(-EINVAL);
>>>> }
>>>>
>>>> + /*
>>>> + * Support only LINEAR modifier.
>>>> + */
>>>> + if ((mode_cmd->flags & DRM_MODE_FB_MODIFIERS) &&
>>>> + mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR) {
>>>> + dev_dbg(dev->dev, "unsupported fb modifier 0x%llx\n",
>>>> + mode_cmd->modifier[0]);
>>>> + return ERR_PTR(-EINVAL);
>>>> + }
>>>> +
>>>> if (rcdu->info->gen < 3) {
>>>> /*
>>>> * On Gen2 the DU limits the pitch to 4095 pixels and requires
>>>> @@ -529,6 +539,7 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
>>>> dev->mode_config.min_width = 0;
>>>> dev->mode_config.min_height = 0;
>>>> dev->mode_config.normalize_zpos = true;
>>>> + dev->mode_config.allow_fb_modifiers = true;
>>>> dev->mode_config.funcs = &rcar_du_mode_config_funcs;
>>>> dev->mode_config.helper_private = &rcar_du_mode_config_helper;
>>>>
>>>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
>>>> index c6430027169f..32135ad387fa 100644
>>>> --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
>>>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
>>>> @@ -726,6 +726,13 @@ static int rcar_du_plane_atomic_get_property(struct drm_plane *plane,
>>>> return 0;
>>>> }
>>>>
>>>> +static bool rcar_du_plane_format_mod_supported(struct drm_plane *plane,
>>>> + uint32_t format,
>>>> + uint64_t modifier)
>>>> +{
>>>> + return modifier == DRM_FORMAT_MOD_LINEAR;
>>>> +}
>>>> +
>>>> static const struct drm_plane_funcs rcar_du_plane_funcs = {
>>>> .update_plane = drm_atomic_helper_update_plane,
>>>> .disable_plane = drm_atomic_helper_disable_plane,
>>>> @@ -735,6 +742,7 @@ static const struct drm_plane_funcs rcar_du_plane_funcs = {
>>>> .atomic_destroy_state = rcar_du_plane_atomic_destroy_state,
>>>> .atomic_set_property = rcar_du_plane_atomic_set_property,
>>>> .atomic_get_property = rcar_du_plane_atomic_get_property,
>>>> + .format_mod_supported = rcar_du_plane_format_mod_supported,
>>>> };
>>>>
>>>> static const uint32_t formats[] = {
>>>> @@ -750,6 +758,11 @@ static const uint32_t formats[] = {
>>>> DRM_FORMAT_NV16,
>>>> };
>>>>
>>>> +static const uint64_t modifiers[] = {
>>>> + DRM_FORMAT_MOD_LINEAR,
>>>> + DRM_FORMAT_MOD_INVALID,
>>>> +};
>>>> +
>>>> int rcar_du_planes_init(struct rcar_du_group *rgrp)
>>>> {
>>>> struct rcar_du_device *rcdu = rgrp->dev;
>>>> @@ -776,7 +789,7 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp)
>>>> ret = drm_universal_plane_init(rcdu->ddev, &plane->plane, crtcs,
>>>> &rcar_du_plane_funcs, formats,
>>>> ARRAY_SIZE(formats),
>>>> - NULL, type, NULL);
>>>> + modifiers, type, NULL);
>>>> if (ret < 0)
>>>> return ret;
>>>>
>>>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
>>>> index 0878accbd134..9d1382b02717 100644
>>>> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
>>>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
>>>> @@ -139,6 +139,11 @@ static const u32 formats_kms[] = {
>>>> DRM_FORMAT_YVU444,
>>>> };
>>>>
>>>> +static const uint64_t modifiers_kms[] = {
>>>> + DRM_FORMAT_MOD_LINEAR,
>>>> + DRM_FORMAT_MOD_INVALID,
>>>> +};
>>>> +
>>>> static const u32 formats_v4l2[] = {
>>>> V4L2_PIX_FMT_RGB332,
>>>> V4L2_PIX_FMT_ARGB444,
>>>> @@ -344,6 +349,13 @@ static void rcar_du_vsp_plane_reset(struct drm_plane *plane)
>>>> state->state.zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1;
>>>> }
>>>>
>>>> +static bool rcar_du_vsp_plane_format_mod_supported(struct drm_plane *plane,
>>>> + uint32_t format,
>>>> + uint64_t modifier)
>>>> +{
>>>> + return modifier == DRM_FORMAT_MOD_LINEAR;
>>>> +}
>>>> +
>>>> static const struct drm_plane_funcs rcar_du_vsp_plane_funcs = {
>>>> .update_plane = drm_atomic_helper_update_plane,
>>>> .disable_plane = drm_atomic_helper_disable_plane,
>>>> @@ -351,6 +363,7 @@ static const struct drm_plane_funcs rcar_du_vsp_plane_funcs = {
>>>> .destroy = drm_plane_cleanup,
>>>> .atomic_duplicate_state = rcar_du_vsp_plane_atomic_duplicate_state,
>>>> .atomic_destroy_state = rcar_du_vsp_plane_atomic_destroy_state,
>>>> + .format_mod_supported = rcar_du_vsp_plane_format_mod_supported,
>>>> };
>>>>
>>>> int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
>>>> @@ -397,7 +410,7 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
>>>> &rcar_du_vsp_plane_funcs,
>>>> formats_kms,
>>>> ARRAY_SIZE(formats_kms),
>>>> - NULL, type, NULL);
>>>> + modifiers_kms, type, NULL);
>>>> if (ret < 0)
>>>> return ret;
>>>>
>
--
--------------------------
Tomohito Esaki
etom@igel.co.jp
next prev parent reply other threads:[~2019-05-17 7:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-09 5:45 [PATCH] drm: rcar-du: add modifiers support Tomohito Esaki
2019-05-09 7:14 ` Laurent Pinchart
2019-05-09 9:25 ` Esaki Tomohito
2019-05-11 18:10 ` Laurent Pinchart
2019-05-17 7:45 ` Esaki Tomohito [this message]
2021-11-18 12:31 ` Laurent Pinchart
2021-11-18 13:02 ` Daniel Stone
2021-11-18 14:05 ` Laurent Pinchart
2021-11-30 8:44 ` Esaki Tomohito
2021-11-30 13:20 ` Daniel Stone
2021-12-01 5:47 ` Esaki Tomohito
2021-11-24 2:49 ` Esaki Tomohito
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=69672977-dc6a-6878-1f4b-4407c4ce9723@igel.co.jp \
--to=etom@igel.co.jp \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).