From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v2 06/13] pinctrl: renesas: pinctrl-rzg2l: Add function pointers for locking/unlocking the PFC register
Date: Thu, 25 Apr 2024 12:40:00 +0100 [thread overview]
Message-ID: <CA+V-a8sxu0eqSY1CsftHjU5mUmLAhKfApNpwEc3o=BjT23h_AQ@mail.gmail.com> (raw)
In-Reply-To: <TY3PR01MB113461F28EA97F494D831267C86112@TY3PR01MB11346.jpnprd01.prod.outlook.com>
Hi Biju,
Thank you for the review.
On Tue, Apr 23, 2024 at 7:12 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
>
> Hi Prabhakar,
>
> Thanks for the patch.
>
> > -----Original Message-----
> > From: Prabhakar <prabhakar.csengg@gmail.com>
> > Sent: Tuesday, April 23, 2024 6:59 PM
> > Subject: [PATCH v2 06/13] pinctrl: renesas: pinctrl-rzg2l: Add function pointers for
> > locking/unlocking the PFC register
> >
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > On the RZ/G2L SoC, the PFCWE bit controls writing to PFC registers.
> > However, on the RZ/V2H(P) SoC, the PFCWE (REGWE_A on RZ/V2H) bit controls writing to both PFC and
> > PMC registers. Additionally, BIT(7) B0WI is undocumented for the PWPR register on RZ/V2H(P) SoC. To
> > accommodate these differences across SoC variants, introduce the set_pfc_mode() and
> > pm_set_pfc() function pointers.
> >
> > Note, in rzg2l_pinctrl_set_pfc_mode() the pwpr_pfc_unlock() call is now called before PMC
> > read/write and pwpr_pfc_lock() call is now called after PMC read/write this is to keep changes
> > minimal for RZ/V2H(P).
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC->v2
> > - Introduced function pointer for (un)lock
> > ---
> > drivers/pinctrl/renesas/pinctrl-rzg2l.c | 51 ++++++++++++++++---------
> > 1 file changed, 34 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > index bec4685b4681..0840fda7ca69 100644
> > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > @@ -246,6 +246,8 @@ struct rzg2l_variable_pin_cfg {
> > u64 pin:3;
> > };
> >
> > +struct rzg2l_pinctrl;
> > +
> > struct rzg2l_pinctrl_data {
> > const char * const *port_pins;
> > const u64 *port_pin_configs;
> > @@ -256,6 +258,8 @@ struct rzg2l_pinctrl_data {
> > const struct rzg2l_hwcfg *hwcfg;
> > const struct rzg2l_variable_pin_cfg *variable_pin_cfg;
> > unsigned int n_variable_pin_cfg;
> > + void (*pwpr_pfc_unlock)(struct rzg2l_pinctrl *pctrl);
> > + void (*pwpr_pfc_lock)(struct rzg2l_pinctrl *pctrl);
> > };
> >
> > /**
> > @@ -462,7 +466,6 @@ static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] =
> > { static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
> > u8 pin, u8 off, u8 func)
> > {
> > - const struct rzg2l_register_offsets *regs = &pctrl->data->hwcfg->regs;
> > unsigned long flags;
> > u32 reg;
> >
> > @@ -473,27 +476,23 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
> > reg &= ~(PM_MASK << (pin * 2));
> > writew(reg, pctrl->base + PM(off));
> >
> > + pctrl->data->pwpr_pfc_unlock(pctrl);
> > +
> > /* Temporarily switch to GPIO mode with PMC register */
> > reg = readb(pctrl->base + PMC(off));
> > writeb(reg & ~BIT(pin), pctrl->base + PMC(off));
> >
> > - /* Set the PWPR register to allow PFC register to write */
> > - writel(0x0, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=0 */
> > - writel(PWPR_PFCWE, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=1 */
> > -
> > /* Select Pin function mode with PFC register */
> > reg = readl(pctrl->base + PFC(off));
> > reg &= ~(PFC_MASK << (pin * 4));
> > writel(reg | (func << (pin * 4)), pctrl->base + PFC(off));
> >
> > - /* Set the PWPR register to be write-protected */
> > - writel(0x0, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=0 */
> > - writel(PWPR_B0WI, pctrl->base + regs->pwpr); /* B0WI=1, PFCWE=0 */
> > -
> > /* Switch to Peripheral pin function with PMC register */
> > reg = readb(pctrl->base + PMC(off));
> > writeb(reg | BIT(pin), pctrl->base + PMC(off));
> >
> > + pctrl->data->pwpr_pfc_lock(pctrl);
> > +
> > spin_unlock_irqrestore(&pctrl->lock, flags); };
> >
> > @@ -2519,12 +2518,8 @@ static void rzg2l_pinctrl_pm_setup_dedicated_regs(struct rzg2l_pinctrl
> > *pctrl, b static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl) {
> > u32 nports = pctrl->data->n_port_pins / RZG2L_PINS_PER_PORT;
> > - const struct rzg2l_hwcfg *hwcfg = pctrl->data->hwcfg;
> > - const struct rzg2l_register_offsets *regs = &hwcfg->regs;
> >
> > - /* Set the PWPR register to allow PFC register to write. */
> > - writel(0x0, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=0 */
> > - writel(PWPR_PFCWE, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=1 */
> > + pctrl->data->pwpr_pfc_unlock(pctrl);
> >
> > /* Restore port registers. */
> > for (u32 port = 0; port < nports; port++) { @@ -2567,9 +2562,7 @@ static void
> > rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
> > }
> > }
> >
> > - /* Set the PWPR register to be write-protected. */
> > - writel(0x0, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=0 */
> > - writel(PWPR_B0WI, pctrl->base + regs->pwpr); /* B0WI=1, PFCWE=0 */
> > + pctrl->data->pwpr_pfc_lock(pctrl);
> > }
> >
> > static int rzg2l_pinctrl_suspend_noirq(struct device *dev) @@ -2631,6 +2624,24 @@ static int
> > rzg2l_pinctrl_resume_noirq(struct device *dev)
> > return 0;
> > }
> >
> > +static void rzg2l_pwpr_pfc_unlock(struct rzg2l_pinctrl *pctrl) {
> > + const struct rzg2l_register_offsets *regs = &pctrl->data->hwcfg->regs;
> > +
> > + /* Set the PWPR register to allow PFC register to write */
> > + writel(0x0, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=0 */
> > + writel(PWPR_PFCWE, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=1 */
> > +}
> > +
> > +static void rzg2l_pwpr_pfc_lock(struct rzg2l_pinctrl *pctrl) {
> > + const struct rzg2l_register_offsets *regs = &pctrl->data->hwcfg->regs;
> > +
> > + /* Set the PWPR register to be write-protected */
> > + writel(0x0, pctrl->base + regs->pwpr); /* B0WI=0, PFCWE=0 */
> > + writel(PWPR_B0WI, pctrl->base + regs->pwpr); /* B0WI=1, PFCWE=0 */
> > +}
> > +
> > static const struct rzg2l_hwcfg rzg2l_hwcfg = {
> > .regs = {
> > .pwpr = 0x3014,
> > @@ -2688,6 +2699,8 @@ static struct rzg2l_pinctrl_data r9a07g043_data = {
> > .variable_pin_cfg = r9a07g043f_variable_pin_cfg,
> > .n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg),
> > #endif
> > + .pwpr_pfc_unlock = &rzg2l_pwpr_pfc_unlock,
> > + .pwpr_pfc_lock = &rzg2l_pwpr_pfc_lock,
> > };
> >
> > static struct rzg2l_pinctrl_data r9a07g044_data = { @@ -2699,6 +2712,8 @@ static struct
> > rzg2l_pinctrl_data r9a07g044_data = {
> > .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common) +
> > ARRAY_SIZE(rzg2l_dedicated_pins.rzg2l_pins),
> > .hwcfg = &rzg2l_hwcfg,
> > + .pwpr_pfc_unlock = &rzg2l_pwpr_pfc_unlock,
> > + .pwpr_pfc_lock = &rzg2l_pwpr_pfc_lock,
> > };
> >
> > static struct rzg2l_pinctrl_data r9a08g045_data = { @@ -2709,6 +2724,8 @@ static struct
> > rzg2l_pinctrl_data r9a08g045_data = {
> > .n_port_pins = ARRAY_SIZE(r9a08g045_gpio_configs) * RZG2L_PINS_PER_PORT,
> > .n_dedicated_pins = ARRAY_SIZE(rzg3s_dedicated_pins),
> > .hwcfg = &rzg3s_hwcfg,
> > + .pwpr_pfc_unlock = &rzg2l_pwpr_pfc_unlock,
> > + .pwpr_pfc_lock = &rzg2l_pwpr_pfc_lock,
>
> Some memory can be saved by avoiding duplication of data by using
> a single pointer for structure containing function pointers??
>
> struct rzg2l_pinctrl_fns {
> void (*pwpr_pfc_unlock)(struct rzg2l_pinctrl *pctrl);
> void (*pwpr_pfc_lock)(struct rzg2l_pinctrl *pctrl);
> }
>
Ok makes sense, I will do that in the next version.
Cheers,
Prabhakar
next prev parent reply other threads:[~2024-04-25 11:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-23 17:58 [PATCH v2 00/13] Add PFC support for Renesas RZ/V2H(P) SoC Prabhakar
2024-04-23 17:58 ` [PATCH v2 01/13] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Remove the check from the object Prabhakar
2024-04-23 17:58 ` [PATCH v2 02/13] dt-bindings: pinctrl: renesas: Document RZ/V2H(P) SoC Prabhakar
2024-04-24 9:05 ` Geert Uytterhoeven
2024-04-25 9:49 ` Lad, Prabhakar
2024-04-23 17:58 ` [PATCH v2 03/13] pinctrl: renesas: pinctrl-rzg2l: Allow more bits for pin configuration Prabhakar
2024-04-23 17:58 ` [PATCH v2 04/13] pinctrl: renesas: pinctrl-rzg2l: Allow parsing of variable configuration for all architectures Prabhakar
2024-04-23 17:58 ` [PATCH v2 05/13] pinctrl: renesas: pinctrl-rzg2l: Validate power registers for SD and ETH Prabhakar
2024-04-23 17:58 ` [PATCH v2 06/13] pinctrl: renesas: pinctrl-rzg2l: Add function pointers for locking/unlocking the PFC register Prabhakar
2024-04-23 18:12 ` Biju Das
2024-04-25 11:40 ` Lad, Prabhakar [this message]
2024-04-23 17:58 ` [PATCH v2 07/13] pinctrl: renesas: pinctrl-rzg2l: Add function pointer for writing to PMC register Prabhakar
2024-04-23 17:58 ` [PATCH v2 08/13] pinctrl: renesas: pinctrl-rzg2l: Add function pointers for reading/writing OEN register Prabhakar
2024-04-23 17:58 ` [PATCH v2 09/13] pinctrl: renesas: pinctrl-rzg2l: Add support to configure the slew-rate Prabhakar
2024-04-23 17:58 ` [PATCH v2 10/13] pinctrl: renesas: pinctrl-rzg2l: Add support to set pulling up/down the pins Prabhakar
2024-04-23 17:58 ` [PATCH v2 11/13] pinctrl: renesas: pinctrl-rzg2l: Pass pincontrol device pointer to pinconf_generic_parse_dt_config() Prabhakar
2024-04-23 17:58 ` [PATCH v2 12/13] pinctrl: renesas: pinctrl-rzg2l: Add support for custom parameters Prabhakar
2024-04-23 17:59 ` [PATCH v2 13/13] pinctrl: renesas: pinctrl-rzg2l: Add support for RZ/V2H SoC Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+V-a8sxu0eqSY1CsftHjU5mUmLAhKfApNpwEc3o=BjT23h_AQ@mail.gmail.com' \
--to=prabhakar.csengg@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).