From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 10/14] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G
Date: Mon, 14 Jun 2021 21:48:05 +0300 [thread overview]
Message-ID: <YMekZeHidc7/vx4m@pendragon.ideasonboard.com> (raw)
In-Reply-To: <1b467e9c9ae580f7a555c42493b95029223b18e8.1623315732.git.geert+renesas@glider.be>
Hi Geert,
Thank you for the patch.
On Thu, Jun 10, 2021 at 11:37:23AM +0200, Geert Uytterhoeven wrote:
> Add support for the Renesas Salvator-X 2nd version development
> board equipped with an R-Car M3e-2G SiP.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> arch/arm64/boot/dts/renesas/Makefile | 2 +
> .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 +++++++++++++++++++
> 2 files changed, 48 insertions(+)
> create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
>
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index 4fa0d56602684faf..6a1061824a9f29f0 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -66,3 +66,5 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
> dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
> dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
> dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
> +
> +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
Same comment as or 07/14 regarding alphabetical ordering.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
> new file mode 100644
> index 0000000000000000..4ab26fd7233d62fc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: (GPL-2.0 or MIT)
> +/*
> + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G
> + *
> + * Copyright (C) 2021 Glider bv
> + *
> + * Based on r8a77961-salvator-xs.dts
> + * Copyright (C) 2018 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +#include "r8a779m3.dtsi"
> +#include "salvator-xs.dtsi"
> +
> +/ {
> + model = "Renesas Salvator-X 2nd version board based on r8a779m3";
> + compatible = "renesas,salvator-xs", "renesas,r8a779m3",
> + "renesas,r8a77961";
> +
> + memory@48000000 {
> + device_type = "memory";
> + /* first 128MB is reserved for secure area. */
> + reg = <0x0 0x48000000 0x0 0x78000000>;
> + };
> +
> + memory@480000000 {
> + device_type = "memory";
> + reg = <0x4 0x80000000 0x0 0x80000000>;
> + };
> +
> + memory@600000000 {
> + device_type = "memory";
> + reg = <0x6 0x00000000 0x1 0x00000000>;
> + };
> +};
> +
> +&du {
> + clocks = <&cpg CPG_MOD 724>,
> + <&cpg CPG_MOD 723>,
> + <&cpg CPG_MOD 722>,
> + <&versaclock6 1>,
> + <&x21_clk>,
> + <&versaclock6 2>;
> + clock-names = "du.0", "du.1", "du.2",
> + "dclkin.0", "dclkin.1", "dclkin.2";
> +};
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2021-06-14 18:48 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 9:37 [PATCH 00/14] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G Geert Uytterhoeven
2021-06-10 9:37 ` [PATCH 01/14] dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards Geert Uytterhoeven
2021-06-13 1:13 ` Laurent Pinchart
2021-06-14 11:25 ` Geert Uytterhoeven
2021-06-14 18:24 ` Laurent Pinchart
2021-06-16 17:56 ` Rob Herring
2021-06-23 10:01 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 02/14] soc: renesas: Identify R-Car H3e-2G and M3e-2G Geert Uytterhoeven
2021-06-14 18:31 ` Laurent Pinchart
2021-06-23 10:13 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 03/14] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G Geert Uytterhoeven
2021-06-14 18:38 ` Laurent Pinchart
2021-06-14 19:16 ` Geert Uytterhoeven
2021-06-23 10:34 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 04/14] mmc: renesas_sdhi: Add support for R-Car H3e-2G and M3e-2G Geert Uytterhoeven
2021-06-14 18:42 ` Laurent Pinchart
2021-06-14 19:32 ` Geert Uytterhoeven
2021-06-24 2:25 ` Yoshihiro Shimoda
2021-06-24 6:14 ` Wolfram Sang
2021-06-24 10:54 ` Yoshihiro Shimoda
2021-06-24 15:19 ` Wolfram Sang
2021-06-25 4:54 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 05/14] arm64: dts: renesas: Add Renesas R8A779M1 SoC support Geert Uytterhoeven
2021-06-14 18:43 ` Laurent Pinchart
2021-06-24 4:56 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 06/14] arm64: dts: renesas: Add Renesas R8A779M3 " Geert Uytterhoeven
2021-06-24 5:08 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 07/14] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G Geert Uytterhoeven
2021-06-14 18:45 ` Laurent Pinchart
2021-06-14 19:34 ` Geert Uytterhoeven
2021-06-24 5:27 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH 08/14] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
2021-06-14 18:46 ` Laurent Pinchart
2021-06-10 9:37 ` [PATCH 09/14] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
2021-06-14 18:46 ` Laurent Pinchart
2021-06-10 9:37 ` [PATCH 10/14] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G Geert Uytterhoeven
2021-06-14 18:48 ` Laurent Pinchart [this message]
2021-06-10 9:37 ` [PATCH 11/14] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven
2021-06-14 18:48 ` Laurent Pinchart
2021-06-10 9:37 ` [PATCH 12/14] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven
2021-06-14 18:48 ` Laurent Pinchart
2021-06-10 9:37 ` [PATCH/RFC 13/14] arm64: dts: renesas: r8a779m1: Add Cortex-A57 2 GHz opp Geert Uytterhoeven
2021-06-16 11:25 ` Yoshihiro Shimoda
2021-06-10 9:37 ` [PATCH/RFC 14/14] arm64: dts: renesas: r8a779m3: " Geert Uytterhoeven
2021-06-16 11:27 ` Yoshihiro Shimoda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YMekZeHidc7/vx4m@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).