On Sat, Jun 01, 2019 at 11:41:15AM +0530, Sagar Shrikant Kadam wrote:
> The i2c-ocore driver already has a polling mode interface.But it needs
> a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
> There is an erratum in FU540 chip that prevents interrupt driven i2c
> transfers from working, and also the I2C controller's interrupt bit
> cannot be cleared if set, due to this the existing i2c polling mode
> interface added in mainline earlier doesn't work, and CPU stall's
> infinitely, when-ever i2c transfer is initiated.
> 
> Ref:
> 	commit dd7dbf0eb090 ("i2c: ocores: refactor setup for polling")
> 
> The workaround / fix under OCORES_FLAG_BROKEN_IRQ is particularly for
> FU540-COOO SoC.
> 
> The polling function identifies a SiFive device based on the device node
> and enables the workaround.
> 
> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Applied to for-next, thanks!