From: Minda Chen <minda.chen@starfivetech.com>
To: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Conor Dooley <conor@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Pawel Laszczak <pawell@cadence.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Peter Chen <peter.chen@kernel.org>,
Roger Quadros <rogerq@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-phy@lists.infradead.org>, <linux-usb@vger.kernel.org>,
<linux-riscv@lists.infradead.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
"Minda Chen" <minda.chen@starfivetech.com>,
Mason Huo <mason.huo@starfivetech.com>
Subject: [PATCH v6 0/7] Add JH7110 USB and USB PHY driver support
Date: Thu, 18 May 2023 19:27:43 +0800 [thread overview]
Message-ID: <20230518112750.57924-1-minda.chen@starfivetech.com> (raw)
This patchset adds USB driver and USB PHY for the StarFive JH7110 SoC.
USB work mode is peripheral and using USB 2.0 PHY in VisionFive 2 board.
The patch has been tested on the VisionFive 2 board.
This patchset should be applied after the patchset [1], [2] and [3]:
[1] https://patchwork.kernel.org/project/linux-riscv/cover/20230518101234.143748-1-xingyu.wu@starfivetech.com/
[2] https://patchwork.kernel.org/project/linux-clk/cover/20230512022036.97987-1-xingyu.wu@starfivetech.com
[3] https://patchwork.kernel.org/project/linux-phy/cover/20230412084540.295411-1-changhuang.liang@starfivetech.com/
This patchset is base on v6.4-rc1
patch 1 is usb phy dt-binding document.
patch 2 is Pcie PHY dt-binding document.
patch 3 is USB 2.0 PHY driver.
patch 4 is PCIe PHY driver.
patch 5 is usb dt-binding document.
patch 6 is the wrapper module driver of Cadence USB3. USB controller IP is Cadence USB3.
patch 7 is USB device tree configuration.
previous version
---
version 1 patchset are split to different kernel organization. It is
incorrect. But they were sent, and Emil sent comments. I think I should
reserve them in cover-letter. To read the change records and previous version,
please start with version 2.
v1: https://patchwork.kernel.org/project/linux-usb/cover/20230306095212.25840-1-minda.chen@starfivetech.com/
v2: https://patchwork.kernel.org/project/linux-usb/cover/20230308082800.3008-1-minda.chen@starfivetech.com/
v3: https://patchwork.kernel.org/project/linux-usb/cover/20230315104411.73614-1-minda.chen@starfivetech.com/
v4: https://patchwork.kernel.org/project/linux-usb/cover/20230406015216.27034-1-minda.chen@starfivetech.com/
v5: https://patchwork.kernel.org/project/linux-usb/cover/20230420110052.3182-1-minda.chen@starfivetech.com/
changes
v6:
1. (patch 3) remove the platform remove function.
2. (patch 4)
- add switch to pcie mode function.
- remove the redundant init/exit function.
3. (patch 5)
- dts split to wrapper layer and cdns node. The codes are
like v3.
- add cdns3 sub node dts-binding references.
4. (patch 6)
For stg-syscon iomem 0x10240000 - 0x10240010 actually is belonged
to usb, so USB contain its own registers. So do not merge the dts node.
The codes are like v3.
- remove the cdns3_platform_add function.
- remove phy ops because cdns3 contain all the phy ops.
- runtime suspend function just shutdown the clocks.
5. (patch 7)
- add cdns3 subnode again.
v5:
1. (patch 1) set correct model name and commit title.
2. (patch 2) change to '-item' in syscon property. change commit title.
3. (patch 5)
- change to '-item' in syscon configure.
- change commit title and doc title.
4. (patch 6)
- add clk and phy deinit function
- add clk deinit function if phy init failed.
- coding style changes and other format changes.
v4:
1. (patch 1) split PCIe PHY dt-binding doc to patch 2.
2. (patch 2) PCIe PHY add stg and sys con configuration to dt-binding doc.
3. (patch 3)
- split PCIe PHY driver to patch 4.
- replace dr_mode to phy mode in jh7110_usb2_phy.
4. (patch 4)
- Makefile and Kconfig sorted by alphabet sequence.
- Add PCIe PHY stg and syscon PHY connection configuration
for USB 3.0.
5. (patch 5)
- commit message changed.
- merge wrapper dts node and cdns3 node in example.
- Add interrupts, reg, phy and dr_mode in property.
- Add reset-name in property example.
6. (patch 6)
- For dts node is merged, Using platform_device_alloc and
platform_device_add to generate cadence sub device.
- IOMEM and IRQ resource are passed to Cadence sub device.
- Add PHY ops process for PHY dts setting can not be passed to
Cadence USB driver.
- remove the stg and sys USB 3.0 PHY configuration.
- Change the suspend clock reset and clock enable sequence.
- Get all reset and clock resources before enable them in
cdns_clk_rst_init.
- commit message changed.
7. (patch 7)
- merge wrapper dts node and cdns3 node in usb dts.
- move the stg and sys USB 3.0 PHY confiuration to
PCIe PHY dts node.
- commit message changed.
- Add reset-names dts.
v3:
1. Add patch 1 - 4. Add USB PHY driver and dt-binding doc.
USB PHY codes are moved to patch 3 and patch 4.
2. (patch 5)
- USB wrapper module dts document is moved to usb directory.
- Remove the 'dr_mode' and 'starfive,usb2-only' setting.
- Some dts format changes. dts binding check pass.
3. (patch 6)
- Remove the PHY codes.
- Search 'dr_mode' and phy setting from Cadence subnode.
4. (patch 7)
- Add USB PHY dts configurion.
- 'dr_mode' is moved to Cadence controller submode.
v2:
1. (patch 5) dt-binding changes. The document example is the same as dts config.
2. (patch 6) using dev_err_probe and syscon_regmap_lookup_by_phandle_args function. Some formats changes
3. (patch 7) dts nodes sorted by the address after @
Minda Chen (7):
dt-bindings: phy: Add StarFive JH7110 USB PHY
dt-bindings: phy: Add StarFive JH7110 PCIe PHY
phy: starfive: Add JH7110 USB 2.0 PHY driver
phy: starfive: Add JH7110 PCIE 2.0 PHY driver
dt-bindings: usb: Add StarFive JH7110 USB controller
usb: cdns3: Add StarFive JH7110 USB driver
riscv: dts: starfive: Add USB dts configuration for JH7110
.../phy/starfive,jh7110-pcie-phy.yaml | 58 +++++
.../bindings/phy/starfive,jh7110-usb-phy.yaml | 50 ++++
.../bindings/usb/starfive,jh7110-usb.yaml | 115 ++++++++
MAINTAINERS | 14 +
.../jh7110-starfive-visionfive-2.dtsi | 5 +
arch/riscv/boot/dts/starfive/jh7110.dtsi | 53 ++++
drivers/phy/starfive/Kconfig | 21 ++
drivers/phy/starfive/Makefile | 2 +
drivers/phy/starfive/phy-jh7110-pcie.c | 204 +++++++++++++++
drivers/phy/starfive/phy-jh7110-usb.c | 150 +++++++++++
drivers/usb/cdns3/Kconfig | 11 +
drivers/usb/cdns3/Makefile | 1 +
drivers/usb/cdns3/cdns3-starfive.c | 246 ++++++++++++++++++
13 files changed, 930 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
base-commit: ac9a78681b921877518763ba0e89202254349d1b
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2023-05-18 11:28 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 11:27 Minda Chen [this message]
2023-05-18 11:27 ` [PATCH v6 1/7] dt-bindings: phy: Add StarFive JH7110 USB PHY Minda Chen
2023-05-18 11:27 ` [PATCH v6 2/7] dt-bindings: phy: Add StarFive JH7110 PCIe PHY Minda Chen
2023-05-18 11:27 ` [PATCH v6 3/7] phy: starfive: Add JH7110 USB 2.0 PHY driver Minda Chen
2023-05-18 11:27 ` [PATCH v6 4/7] phy: starfive: Add JH7110 PCIE " Minda Chen
2023-05-18 11:27 ` [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller Minda Chen
2023-05-25 21:34 ` Conor Dooley
2023-05-26 10:24 ` Minda Chen
2023-05-26 13:13 ` Conor Dooley
2023-06-18 12:22 ` Minda Chen
2023-06-19 13:35 ` Greg Kroah-Hartman
2023-05-18 11:27 ` [PATCH v6 6/7] usb: cdns3: Add StarFive JH7110 USB driver Minda Chen
2023-05-29 14:50 ` Greg Kroah-Hartman
2023-05-29 14:52 ` Greg Kroah-Hartman
2023-05-18 11:27 ` [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110 Minda Chen
2023-05-25 21:36 ` Conor Dooley
2023-05-29 14:46 ` Greg Kroah-Hartman
2023-06-07 17:40 ` Conor Dooley
2023-05-26 9:03 ` [PATCH v6 0/7] Add JH7110 USB and USB PHY driver support Roger Quadros
2023-05-31 11:42 ` Minda Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230518112750.57924-1-minda.chen@starfivetech.com \
--to=minda.chen@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mason.huo@starfivetech.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=pawell@cadence.com \
--cc=peter.chen@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rogerq@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).