[PATCH v1] RISC-V: mark hibernation as nonportable

[Conor Dooley <conor.dooley@microchip.com>]

Hibernation support depends on firmware marking its reserved/PMP
protected regions as not accessible from Linux.
The latest versions of the de-facto SBI implementation (OpenSBI) do
not do this, having dropped the no-map property to enable 1 GiB huge
page mappings by the kernel.
This was exposed by commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages
for the linear mapping"), which made the first 2 MiB of DRAM (where SBI
typically resides) accessible by the kernel.
Attempting to hibernate with either OpenSBI, or other implementations
following its lead, will lead to a kernel panic ([1], [2]) as the
hibernation process will attempt to save/restore any mapped regions,
including the PMP protected regions in use by the SBI implementation.

Mark hibernation as depending on "NONPORTABLE", as only a small subset
of systems are capable of supporting it, until such time that an SBI
implementation independent way to communicate what regions are in use
has been agreed on.

As hibernation support landed in v6.4-rc1, disabling it for most
platforms does not constitute a regression. The alternative would have
been reverting commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for
the linear mapping").
Doing so would permit hibernation on platforms with these SBI
implementations, but would limit the options we have to solve the
protection of the region without causing a regression in hibernation
support.

Reported-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/all/CAAYs2=gQvkhTeioMmqRDVGjdtNF_vhB+vm_1dHJxPNi75YDQ_Q@mail.gmail.com/ [1]
Reported-by: JeeHeng Sia <jeeheng.sia@starfivetech.com>
Link: https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/ITXwaKfA6z8 [2]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/Kconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 13f058490608..117d53785560 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -800,8 +800,11 @@ menu "Power management options"
 
 source "kernel/power/Kconfig"
 
+# Hibernation is only possible on systems where the SBI implementation has
+# marked its reserved memory as not accessible from, or does not run
+# from the same memory as, Linux
 config ARCH_HIBERNATION_POSSIBLE
-	def_bool y
+	def_bool NONPORTABLE
 
 config ARCH_HIBERNATION_HEADER
 	def_bool HIBERNATION
-- 
2.39.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv