From: Charlie Jenkins <charlie@rivosinc.com>
To: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: charlie@rivosinc.com, conor@kernel.org, paul.walmsley@sifive.com,
palmer@rivosinc.com, aou@eecs.berkeley.edu, anup@brainfault.org,
konstantin@linuxfoundation.org, linux-doc@vger.kernel.org,
linux-kselftest@vger.kernel.org, linux-mm@kvack.org,
mick@ics.forth.gr, jrtc27@jrtc27.com, rdunlap@infradead.org
Subject: [PATCH v4 1/4] RISC-V: mm: Restrict address space for sv39,sv48,sv57
Date: Fri, 7 Jul 2023 18:11:32 -0700 [thread overview]
Message-ID: <20230708011156.2697409-2-charlie@rivosinc.com> (raw)
In-Reply-To: <20230708011156.2697409-1-charlie@rivosinc.com>
Make sv48 the default address space for mmap as some applications
currently depend on this assumption. A hint address passed to mmap will
cause the largest address space that fits entirely into the hint to be
used. If the hint is less than or equal to 1<<38, an sv39 address will
be used. An exception is that if the hint address is 0, then a sv48
address will be used. After an address space is completely full, the next
smallest address space will be used.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
---
arch/riscv/include/asm/elf.h | 2 +-
arch/riscv/include/asm/pgtable.h | 13 ++++++++-
arch/riscv/include/asm/processor.h | 43 +++++++++++++++++++++++++-----
3 files changed, 49 insertions(+), 9 deletions(-)
diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h
index c24280774caf..5d3368d5585c 100644
--- a/arch/riscv/include/asm/elf.h
+++ b/arch/riscv/include/asm/elf.h
@@ -49,7 +49,7 @@ extern bool compat_elf_check_arch(Elf32_Ehdr *hdr);
* the loader. We need to make sure that it is out of the way of the program
* that it will "exec", and that there is sufficient room for the brk.
*/
-#define ELF_ET_DYN_BASE ((TASK_SIZE / 3) * 2)
+#define ELF_ET_DYN_BASE ((DEFAULT_MAP_WINDOW / 3) * 2)
#ifdef CONFIG_64BIT
#ifdef CONFIG_COMPAT
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 75970ee2bda2..a8090ebea705 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -57,18 +57,29 @@
#define MODULES_END (PFN_ALIGN((unsigned long)&_start))
#endif
+
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#ifdef CONFIG_64BIT
+#define VA_BITS_SV39 39
+#define VA_BITS_SV48 48
+#define VA_BITS_SV57 57
+
+#define VA_USER_SV39 (UL(1) << (VA_BITS_SV39 - 1))
+#define VA_USER_SV48 (UL(1) << (VA_BITS_SV48 - 1))
+#define VA_USER_SV57 (UL(1) << (VA_BITS_SV57 - 1))
+
#define VA_BITS (pgtable_l5_enabled ? \
- 57 : (pgtable_l4_enabled ? 48 : 39))
+ VA_BITS_SV57 : (pgtable_l4_enabled ? VA_BITS_SV48 : VA_BITS_SV39))
#else
#define VA_BITS 32
#endif
+#define MMAP_VA_BITS ((VA_BITS >= VA_BITS_SV48) ? VA_BITS_SV48 : VA_BITS)
+
#define VMEMMAP_SHIFT \
(VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index c950a8d9edef..63715c071e1b 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -13,20 +13,49 @@
#include <asm/ptrace.h>
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
-
-#define STACK_TOP TASK_SIZE
#ifdef CONFIG_64BIT
+#define DEFAULT_MAP_WINDOW (UL(1) << (MMAP_VA_BITS - 1))
#define STACK_TOP_MAX TASK_SIZE_64
+
+#define arch_get_mmap_end(addr, len, flags) \
+({ \
+ unsigned long mmap_end; \
+ if ((addr) >= VA_USER_SV57) \
+ mmap_end = STACK_TOP_MAX; \
+ else if ((((addr) >= VA_USER_SV48)) && (VA_BITS >= VA_BITS_SV48)) \
+ mmap_end = VA_USER_SV48; \
+ else \
+ mmap_end = VA_USER_SV39; \
+ mmap_end; \
+})
+
+#define arch_get_mmap_base(addr, base) \
+({ \
+ unsigned long mmap_base; \
+ if ((addr >= VA_USER_SV57) && (VA_BITS >= VA_BITS_SV57)) \
+ mmap_base = base + (VA_USER_SV57 - DEFAULT_MAP_WINDOW); \
+ else if ((((addr) >= VA_USER_SV48)) && (VA_BITS >= VA_BITS_SV48)) \
+ mmap_base = base + (VA_USER_SV48 - DEFAULT_MAP_WINDOW); \
+ else \
+ mmap_base = base + (VA_USER_SV39 - DEFAULT_MAP_WINDOW); \
+ mmap_base; \
+})
+
#else
+#define DEFAULT_MAP_WINDOW TASK_SIZE
#define STACK_TOP_MAX TASK_SIZE
#endif
#define STACK_ALIGN 16
+
+#define STACK_TOP DEFAULT_MAP_WINDOW
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE PAGE_ALIGN(DEFAULT_MAP_WINDOW / 3)
+
#ifndef __ASSEMBLY__
struct task_struct;
--
2.41.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-07-08 1:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-08 1:11 [PATCH v4 0/4] RISC-V: mm: Make SV48 the default address space Charlie Jenkins
2023-07-08 1:11 ` Charlie Jenkins [this message]
2023-07-08 1:11 ` [PATCH v4 2/4] RISC-V: mm: Add tests for RISC-V mm Charlie Jenkins
2023-07-08 1:11 ` [PATCH v4 3/4] RISC-V: mm: Update pgtable comment documentation Charlie Jenkins
2023-07-08 1:11 ` [PATCH v4 4/4] RISC-V: mm: Document mmap changes Charlie Jenkins
2023-07-08 3:02 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230708011156.2697409-2-charlie@rivosinc.com \
--to=charlie@rivosinc.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=jrtc27@jrtc27.com \
--cc=konstantin@linuxfoundation.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mick@ics.forth.gr \
--cc=palmer@rivosinc.com \
--cc=paul.walmsley@sifive.com \
--cc=rdunlap@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).