From: <gregkh@linuxfoundation.org>
To: gregkh@linuxfoundation.org,guoren@kernel.org,linux-riscv@lists.infradead.org,maz@kernel.org,namcao@linutronix.de,palmer@dabbelt.com,paul.walmsley@sifive.com,samuel@sholland.org,tglx@linutronix.de
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "irqchip/sifive-plic: Enable interrupt if needed before EOI" has been added to the 6.1-stable tree
Date: Mon, 26 Feb 2024 13:33:13 +0100 [thread overview]
Message-ID: <2024022613-strode-dastardly-5e43@gregkh> (raw)
This is a note to let you know that I've just added the patch titled
irqchip/sifive-plic: Enable interrupt if needed before EOI
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
irqchip-sifive-plic-enable-interrupt-if-needed-before-eoi.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
From 9c92006b896c767218aabe8947b62026a571cfd0 Mon Sep 17 00:00:00 2001
From: Nam Cao <namcao@linutronix.de>
Date: Wed, 31 Jan 2024 09:19:33 +0100
Subject: irqchip/sifive-plic: Enable interrupt if needed before EOI
From: Nam Cao <namcao@linutronix.de>
commit 9c92006b896c767218aabe8947b62026a571cfd0 upstream.
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."
Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.
However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-sifive-plic.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -144,7 +144,13 @@ static void plic_irq_eoi(struct irq_data
{
struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
- writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+ if (unlikely(irqd_irq_disabled(d))) {
+ plic_toggle(handler, d->hwirq, 1);
+ writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+ plic_toggle(handler, d->hwirq, 0);
+ } else {
+ writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+ }
}
#ifdef CONFIG_SMP
Patches currently in stable-queue which might be from namcao@linutronix.de are
queue-6.1/irqchip-sifive-plic-enable-interrupt-if-needed-before-eoi.patch
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
reply other threads:[~2024-02-26 12:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024022613-strode-dastardly-5e43@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=guoren@kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=namcao@linutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=samuel@sholland.org \
--cc=stable-commits@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).