Re: [PATCH v4 0/3] Add JH7110 cpufreq support

From: Shengyu Qu <wiagn233@outlook.com>
To: Mason Huo <mason.huo@starfivetech.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: wiagn233@outlook.com, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org
Subject: Re: [PATCH v4 0/3] Add JH7110 cpufreq support
Date: Tue, 6 Jun 2023 21:51:55 +0800	[thread overview]
Message-ID: <TY3P286MB2611D89E41BA16BAD5A0B9899852A@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20230606105656.124355-1-mason.huo@starfivetech.com>

[-- Attachment #1.1.1.1: Type: text/plain, Size: 1587 bytes --]

Hello,

AXP15060 series just got merged, just to remind this for anyone who 
wants to test this series.

Best regards,
Shengyu

> The StarFive JH7110 SoC has four RISC-V cores,
> and it supports up to 4 cpu frequency loads.
>
> This patchset adds the compatible strings into the allowlist
> for supporting the generic cpufreq driver on JH7110 SoC.
> Also, it enables the axp15060 pmic for the cpu power source.
>
> The series has been tested on the VisionFive 2 boards which
> are equipped with JH7110 SoC and axp15060 pmic.
>
> ---
> This patchset is based on v6.4-rc4 with these patches applied:
> [1] ("regulator: Add X-Powers AXP15060/AXP313a PMIC support")
>      https://lore.kernel.org/lkml/20230524000012.15028-1-andre.przywara@arm.com/
>
> Changes since v3:
> - Fix the dtb_check issues for axp15060 pmic dts configuration.
>
> Changes since v2:
> - Fix the new blank line at EOF issue in dtsi.
>
> Changes since v1:
> - Fix dts node naming issues.
> - Move clock properties of cpu node from <board>.dtsi to <soc>.dtsi.
> - Follow the alphabetical order to place the cpufreq dt allowlist.
>
> Mason Huo (3):
>    riscv: dts: starfive: Enable axp15060 pmic for cpufreq
>    cpufreq: dt-platdev: Add JH7110 SOC to the allowlist
>    riscv: dts: starfive: Add cpu scaling for JH7110 SoC
>
>   .../jh7110-starfive-visionfive-2.dtsi         | 33 +++++++++++++++++++
>   arch/riscv/boot/dts/starfive/jh7110.dtsi      | 33 +++++++++++++++++++
>   drivers/cpufreq/cpufreq-dt-platdev.c          |  2 ++
>   3 files changed, 68 insertions(+)
>

[-- Attachment #1.1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 6977 bytes --]

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv