Re: [PATCH v2 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 23/06/2023 16:59, Aleksandr Shubin wrote:
> Allwinner's D1, T113-S3 and R329 SoCs have a new pwm
> controller witch is different from the previous pwm-sun4i.
> 
> The D1 and T113 are identical in terms of peripherals,
> they differ only in the architecture of the CPU core, and
> even share the majority of their DT. Because of that,
> using the same compatible makes sense.
> The R329 is a different SoC though, and should have
> a different compatible string added, especially as there
> is a difference in the number of channels.
> 
> D1 and T113s SoCs have one PWM controller with 8 channels.
> R329 SoC has two PWM controllers in both power domains, one of
> them has 9 channels (CPUX one) and the other has 6 (CPUS one).
> 
> Add a device tree binding for them.
> 
> Signed-off-by: Aleksandr Shubin <privatesub2@gmail.com>
> ---
>  .../bindings/pwm/allwinner,sun20i-pwm.yaml    | 83 +++++++++++++++++++
>  1 file changed, 83 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> new file mode 100644
> index 000000000000..eec9d1dd67c2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner D1, T113-S3 and R329 PWM
> +
> +maintainers:
> +  - Aleksandr Shubin <privatesub2@gmail.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: allwinner,sun20i-d1-pwm
> +      - items:
> +          - const: allwinner,sun20i-r329-pwm
> +          - const: allwinner,sun20i-d1-pwm
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#pwm-cells":
> +    const: 3
> +
> +  clocks:
> +    items:
> +      - description: 24 MHz oscillator
> +      - description: Bus Clock
> +
> +  clock-names:
> +    items:
> +      - const: hosc
> +      - const: bus
> +
> +  resets:
> +    maxItems: 1
> +    description: module reset
> +
> +allOf:
> +  - $ref: pwm.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun20i-r329-pwm
> +
> +    then:
> +      properties:
> +        allwinner,pwm-channels:
> +          $ref: /schemas/types.yaml#/definitions/uint32
> +          description: The number of PWM channels configured for this instance
> +          enum: [6, 9]
> +

Your DTS says this is 8, so you did not test it. Why do you need it in
the first place? r329 can have both 6 and 9?

Anyway, this won't work with additionalProperties, which you would see
with testing. Don't define properties in allOf. Also switch to
unevaluatedProperties: false.

Best regards,
Krzysztof


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv